Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008306B0000 is a 2 mm top and bottom blanking component from the System pro E Power range, designed for compatible IP30/IP40 low-voltage switchboard configurations with a nominal depth of 1250 mm and width of 300 mm.
£116.03
The ABB 1STQ008306B0000 is a dedicated 2 mm top and bottom blanking component for the ABB System pro E Power low-voltage switchboard system. Specified for enclosure configurations with a nominal depth of 1250 mm and width of 300 mm, this accessory supports the construction of compatible electrical distribution assemblies requiring a blanked top or bottom enclosure arrangement.
As part of the ABB System pro E Power range, this component provides a manufacturer-specific solution for professional switchboard construction. Its designation, 2MM BL TOP BOTTOM IP30/40 D1250 W300, identifies the specified thickness, top and bottom blanking application, IP30/IP40 protection configurations and nominal enclosure dimensions.
The ABB 1STQ008306B0000 is intended for switchboard manufacturers, electrical panel builders and installation engineers selecting enclosure components for modular low-voltage distribution systems. Its 1250 mm depth and 300 mm width make it suitable for compatible narrow enclosure sections where the specified top or bottom blanking arrangement is required.
The ABB 1STQ008306B0000 blanking component is intended for use in compatible System pro E Power switchboards where a designated top or bottom enclosure area requires a blanking arrangement. Such components form part of the mechanical enclosure system, helping panel builders configure the external boundaries of an electrical distribution assembly according to the selected cabinet layout.
The specified 1250 mm depth and 300 mm width are important selection criteria when choosing the appropriate component for a particular switchboard section. The manufacturer's 2 mm thickness designation further distinguishes this accessory from alternatives with different construction specifications. Correct dimensional matching is essential for integration with the surrounding System pro E Power enclosure structure.
The IP30/IP40 designation identifies the enclosure protection configurations for which the component is intended. In a correctly assembled enclosure, IP30 provides protection against access to hazardous parts with a tool and solid foreign objects of 2.5 mm diameter or greater, while IP40 provides protection against access with a wire and solid foreign objects of 1 mm diameter or greater. Neither rating provides water ingress protection. The blanking component does not independently establish an IP rating; the protection achieved depends on the complete switchboard construction and correct installation of all associated enclosure parts.
| Series | System pro E Power |
|---|---|
| Manufacturer order code | 1STQ008306B0000 |
| Product designation | 2MM BL TOP BOTTOM IP30/40 D1250 W300 |
| Product type | Top and bottom blanking component |
| Product category | Electrical switchboard enclosure accessories |
| Specified thickness | 2 mm |
| Nominal enclosure depth | 1250 mm |
| Nominal enclosure width | 300 mm |
| Installation position | Top or bottom of compatible enclosure configurations |
| Configuration | Blanking arrangement |
| Designated protection configurations | IP30 / IP40 |
| Compatible enclosure system | ABB System pro E Power |
| Component function | Mechanical blanking of designated enclosure areas |
| Installation application | Compatible low-voltage switchboard assemblies |
| Electrical function | Passive mechanical enclosure accessory |
The ABB 1STQ008306B0000 is a top and bottom blanking component for compatible ABB System pro E Power low-voltage switchboards. It is specified for enclosure configurations with a nominal depth of 1250 mm and width of 300 mm.
The manufacturer's designation specifies a 1250 mm nominal depth, 300 mm nominal width and 2 mm thickness. These are the stated selection dimensions and should not be interpreted as a complete set of external product measurements.
BL TOP BOTTOM identifies a blanking configuration intended for compatible top or bottom enclosure arrangements. The exact installation position, fixing method and associated components should be confirmed using the relevant ABB System pro E Power assembly instructions.
No. The component is designated for IP30/IP40 enclosure configurations, but the protection rating applies to the correctly assembled switchboard rather than an individual accessory. The completed enclosure must use the appropriate components and installation methods to achieve its specified IP rating.
The component belongs to the ABB System pro E Power range. Compatibility should be checked against the required 1250 mm depth, 300 mm width, top or bottom blanking arrangement and applicable ABB installation documentation.
ABB System pro E Power enclosure accessories support modular, consistent and professional low-voltage electrical distribution assemblies. The 1STQ008306B0000 provides a dedicated 2 mm top and bottom blanking component for compatible 1250 mm deep and 300 mm wide IP30/IP40 switchboard configurations, supporting electrical panel manufacturers, contractors and industrial installation engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.