Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008305B0000 is a 2 mm open top and bottom enclosure component from the System pro E Power range, specified for compatible IP30/IP40 low-voltage switchboard configurations with a nominal depth and width of 1250 mm.
£412.14
The ABB 1STQ008305B0000 is a dedicated 2 mm open top and bottom enclosure component for the ABB System pro E Power low-voltage switchboard system. Specified for enclosure configurations with a nominal depth of 1250 mm and width of 1250 mm, this accessory is intended for compatible electrical distribution assemblies requiring an open top and bottom arrangement.
As part of the ABB System pro E Power range, this component supports modular switchboard construction in industrial, commercial and infrastructure applications. Its manufacturer designation, 2MM OPEN TOP BOTTOM IP30/40 D1250 W1250, identifies the specified thickness, opening arrangement, enclosure protection configurations and nominal dimensions.
The ABB 1STQ008305B0000 is designed for professional switchboard manufacturers and electrical panel builders selecting enclosure components for larger low-voltage distribution assemblies. Its IP30/IP40 configuration designation makes it relevant to compatible switchboard designs where the required enclosure protection must be achieved through the complete assembly and the correct selection of associated components.
The ABB 1STQ008305B0000 enclosure component is intended for compatible System pro E Power assemblies requiring an open top and bottom arrangement. This configuration is an important selection characteristic when planning the mechanical layout of a low-voltage switchboard. The precise function of the openings and the required associated components depend on the selected enclosure design and ABB assembly instructions.
The specified 1250 mm depth and 1250 mm width help identify the appropriate enclosure configuration, while the 2 mm thickness distinguishes this component from alternatives with different construction specifications. Selecting the correct dimensional variant is important for maintaining compatibility with the surrounding switchboard structure.
The manufacturer's IP30/IP40 designation identifies the protection configurations for which the component is intended. In a correctly assembled enclosure, IP30 provides protection against access to hazardous parts with a tool and solid foreign objects of 2.5 mm diameter or greater, while IP40 provides protection against access with a wire and solid foreign objects of 1 mm diameter or greater. Neither rating includes water ingress protection. The component does not independently establish an IP rating; the protection achieved depends on the complete enclosure, including any openings, covers, seals and associated components.
| Series | System pro E Power |
|---|---|
| Manufacturer order code | 1STQ008305B0000 |
| Product designation | 2MM OPEN TOP BOTTOM IP30/40 D1250 W1250 |
| Product type | Open top and bottom enclosure component |
| Product category | Electrical switchboard enclosure accessories |
| Specified thickness | 2 mm |
| Nominal enclosure depth | 1250 mm |
| Nominal enclosure width | 1250 mm |
| Opening configuration | Open top and bottom |
| Designated protection configurations | IP30 / IP40 |
| Compatible enclosure system | ABB System pro E Power |
| Component function | Mechanical enclosure integration |
| Installation application | Compatible low-voltage switchboard assemblies |
| Electrical function | Passive mechanical enclosure accessory |
The ABB 1STQ008305B0000 is a mechanical enclosure component for compatible ABB System pro E Power low-voltage switchboards. It is specified for an open top and bottom arrangement in 1250 mm deep and 1250 mm wide enclosure configurations.
The manufacturer designation specifies a 1250 mm nominal depth, 1250 mm nominal width and 2 mm thickness. These are the stated product selection dimensions rather than a complete set of external measurements.
Open top and bottom is the arrangement identified in the ABB product designation. It indicates that the component is intended for a compatible enclosure configuration with openings at the top and bottom. The required installation details and associated enclosure components should be confirmed using ABB assembly documentation.
No. The product is designated for IP30/IP40 configurations, but the ingress protection rating applies to the correctly assembled enclosure rather than the individual accessory. The final rating depends on the complete switchboard construction and the correct installation of all associated components.
The component belongs to the ABB System pro E Power range. Its suitability for a particular switchboard should be checked against the required 1250 mm depth, 1250 mm width, open top and bottom arrangement and applicable ABB installation instructions.
ABB System pro E Power enclosure accessories support modular and professional low-voltage electrical distribution assemblies. The 1STQ008305B0000 provides a dedicated 2 mm component for compatible 1250 mm deep and 1250 mm wide switchboard configurations with an open top and bottom arrangement, supporting electrical panel manufacturers, contractors and industrial installation engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.