Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008304B0000 System Pro E Power 2 mm open top/bottom enclosure component for compatible IP30/IP40 low-voltage switchboard configurations with a nominal depth of 1250 mm and width of 1000 mm.
£375.73
The ABB 1STQ008304B0000 is a dedicated 2 mm open top/bottom enclosure component designed for the ABB System Pro E Power modular low-voltage switchboard range. Identified by the manufacturer as 2MM OPEN TOP BOTTOM IP30/40 D1250 W1000, this accessory is specified for compatible IP30 and IP40 switchboard configurations with a nominal depth of 1250 mm and width of 1000 mm.
As part of the ABB System Pro E Power product group, this component supports the construction of professional electrical distribution enclosures requiring an appropriate top or bottom opening. Its 2 mm thickness, open configuration and manufacturer-defined enclosure dimensions help panel builders identify the correct accessory for the intended switchboard structure.
The ABB 1STQ008304B0000 is suitable for professional electrical panel builders, switchboard manufacturers and industrial electrical contractors working with compatible System Pro E Power assemblies. It provides a manufacturer-specific enclosure solution for installations where the specified 1250 mm depth and 1000 mm width must be accommodated.
The ABB 1STQ008304B0000 is designed for compatible System Pro E Power switchboard structures requiring an open top/bottom enclosure arrangement. Top and bottom enclosure components form part of the mechanical construction of electrical distribution assemblies, helping define the boundaries and openings around the internal switchboard equipment.
An open top/bottom configuration can be appropriate where the switchboard design requires a designated opening for cable routing, conductors or other installation interfaces. The exact function and permitted arrangement depend on the complete ABB enclosure design. The manufacturer designation should not be interpreted as confirmation that every cable-entry method or accessory configuration is supported.
The specified 2 mm thickness is an important selection characteristic of this product. It distinguishes the component from alternatives with different thickness designations and helps ensure that the correct enclosure accessory is selected. The supplied manufacturer description does not identify the material grade, coating or surface finish, so these characteristics should be verified separately where required.
The manufacturer's D1250 W1000 designation identifies a nominal enclosure depth of 1250 mm and a nominal enclosure width of 1000 mm. These dimensions refer to the intended System Pro E Power configuration and should not automatically be treated as the exact manufactured dimensions of the individual component.
The 1000 mm width designation is particularly important when selecting this accessory for wider switchboard arrangements. It differentiates the ABB 1STQ008304B0000 from similar open top/bottom components intended for narrower enclosure configurations. The selected component must correspond to the intended switchboard structure, including its nominal depth and width.
The manufacturer's IP30/40 designation identifies the component for compatible IP30 and IP40 enclosure arrangements. Under IEC 60529, IP30 provides protection against solid foreign objects of 2.5 mm diameter and larger, while IP40 provides protection against solid foreign objects of 1 mm diameter and larger. Neither rating specifies protection against water ingress.
Because this product has an open top/bottom configuration, the protection rating of the completed switchboard must be assessed as a whole. The component does not independently establish IP30 or IP40 protection. The finished enclosure's rating depends on the opening arrangement, associated barriers, cable-entry components, installation details and all other relevant enclosure interfaces.
For professional electrical panel builders, accurate accessory selection helps maintain compatibility with the ABB System Pro E Power modular structure. The ABB 1STQ008304B0000 should be matched to the designated enclosure configuration, with fixing requirements and installation positions confirmed against the applicable ABB assembly instructions.
The component is a mechanical enclosure accessory, not an electrical protective device. It does not independently provide switching, isolation, overload protection, short-circuit protection or a current-carrying rating. Those functions are determined by the electrical equipment and overall design of the completed distribution assembly.
By providing a dedicated 2 mm open top/bottom component for 1250 mm deep and 1000 mm wide switchboard configurations, ABB supports coordinated enclosure construction and consistent component selection for professional low-voltage electrical distribution installations.
The ABB 1STQ008304B0000 is a 2 mm open top/bottom enclosure component designed for compatible ABB System Pro E Power IP30/IP40 switchboard configurations with a nominal depth of 1250 mm and width of 1000 mm.
The official ABB manufacturer order code is 1STQ008304B0000, corresponding to the System Pro E Power component designated 2MM OPEN TOP BOTTOM IP30/40 D1250 W1000.
The manufacturer's 2MM designation specifies a component thickness of 2 mm. The supplied description does not independently identify the material grade, coating or surface finish.
The component is specified for a 1250 mm nominal enclosure depth and a 1000 mm nominal enclosure width. These are configuration dimensions rather than independently verified physical measurements of the individual accessory.
The open top/bottom designation identifies an enclosure component intended for a compatible switchboard arrangement with a designated top or bottom opening. The permitted installation position and required associated accessories should be confirmed against ABB's assembly documentation.
Yes. The manufacturer's IP30/40 designation identifies the component for compatible IP30 enclosure configurations. The completed switchboard must be correctly assembled to achieve the intended protection rating.
Yes. The component is specified for compatible IP40 enclosure configurations, subject to the complete enclosure design, opening arrangement and installation requirements.
No. The 1STQ008304B0000 is an enclosure component, and the IP rating of the finished switchboard depends on the complete assembly, including openings, barriers, associated accessories and installation details.
The manufacturer specifies IP30/IP40 enclosure configurations, neither of which includes a stated level of water ingress protection. Outdoor suitability should not be assumed without an appropriately designed and protected installation.
The component is specifically identified for the ABB System Pro E Power product group. Compatibility with a particular enclosure, mounting position and accessory arrangement should be verified against the relevant ABB installation documentation.
ABB System Pro E Power enclosure accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB 1STQ008304B0000 offers a dedicated 2 mm open top/bottom component for compatible IP30/IP40 enclosure arrangements with a nominal depth of 1250 mm and width of 1000 mm, supporting accurate component selection and consistent electrical distribution assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.