Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008302B0000 System Pro E Power 2 mm open top and bottom enclosure component for compatible 1250 mm deep and 600 mm wide low-voltage switchgear cabinets with designated IP30/IP40 protection configurations.
£259.69
The ABB 1STQ008302B0000 is a dedicated 2 mm open top and bottom enclosure component designed for compatible ABB System Pro E Power low-voltage switchgear and electrical distribution assemblies. Specified for an enclosure configuration with a 1250 mm depth and 600 mm width, this accessory supports the construction of modular electrical cabinets with designated IP30/IP40 protection arrangements.
As part of the ABB System Pro E Power range, this component is intended for professional electrical panel builders, switchboard manufacturers and installation engineers requiring enclosure accessories matched to specific cabinet dimensions. Its open top and bottom configuration provides a defined arrangement for compatible electrical distribution enclosures, while the specified 2 mm thickness supports the mechanical requirements of the designated assembly.
With a 2 mm specified thickness, 1250 mm nominal depth and 600 mm nominal width, the ABB 1STQ008302B0000 is suitable for System Pro E Power configurations requiring the corresponding open top and bottom component. The product designation references IP30/IP40 protection configurations, with the final ingress protection rating determined by the complete enclosure assembly and its installed accessories.
The ABB 1STQ008302B0000 open top and bottom component supports the construction of compatible System Pro E Power switchgear enclosures. Its specified dimensions allow electrical panel builders to identify the appropriate accessory for a cabinet arrangement with a nominal depth of 1250 mm and width of 600 mm. The open configuration is intended for integration into the corresponding modular enclosure design, where the arrangement of structural components and supplementary accessories determines the completed assembly.
The ABB System Pro E Power series provides a modular platform for low-voltage electrical power distribution, including main distribution boards and industrial switchgear assemblies. The range incorporates coordinated enclosure components that support professional switchboard construction. For installations requiring IP30 or IP40 protection, the complete enclosure must be assembled using the appropriate compatible components and ABB installation instructions. The stated protection configurations do not establish an independent ingress protection rating for the individual open component.
| Series | System Pro E Power |
|---|---|
| Model / order code | 1STQ008302B0000 |
| Product designation | 2MM OPEN TOP BOTTOM IP30/40 D1250 W600 |
| Product type | Open top and bottom enclosure component |
| Accessory category | Electrical enclosure structural accessories |
| Specified thickness | 2 mm |
| Nominal enclosure depth | 1250 mm |
| Nominal enclosure width | 600 mm |
| Top configuration | Open |
| Bottom configuration | Open |
| Designated protection configurations | IP30 / IP40 |
| Compatible product family | ABB System Pro E Power |
| Application | Modular electrical enclosure assembly |
| Equipment category | Low-voltage switchgear and distribution enclosure accessories |
| Installation environment | Electrical distribution cabinets and switchgear assemblies |
| Mounting application | Integration into a compatible modular enclosure structure |
The ABB 1STQ008302B0000 is an open top and bottom enclosure component intended for compatible ABB System Pro E Power low-voltage distribution assemblies. It is specified for a 1250 mm depth and 600 mm width cabinet configuration.
The product designation specifies a 2 mm thickness, 1250 mm nominal enclosure depth and 600 mm nominal enclosure width. These values identify the designated component and installation configuration rather than a complete set of external product dimensions.
The IP30/IP40 designation identifies the protection configurations associated with the enclosure component. Under IEC 60529, IP30 provides protection against access by solid objects of at least 2.5 mm, while IP40 provides protection against solid objects of at least 1 mm. Neither rating specifies protection against water ingress. The completed enclosure must meet the applicable protection requirements.
The component belongs to the ABB System Pro E Power product group, a modular enclosure system for low-voltage electrical distribution assemblies. Compatibility should be checked against the specific cabinet configuration and relevant ABB assembly instructions.
No. The ABB 1STQ008302B0000 is an enclosure component intended for integration into a compatible System Pro E Power assembly. Additional enclosure structures, panels, fixings and accessories may be required depending on the completed switchgear configuration.
ABB System Pro E Power enclosure accessories support electrical panel builders, switchboard manufacturers and industrial engineers in constructing modular low-voltage distribution systems. The ABB 1STQ008302B0000 provides a specified 2 mm open top and bottom component for compatible 1250 mm deep and 600 mm wide enclosure configurations, supporting consistent component selection and professional switchgear assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.