Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ008301B0000 System Pro E Power 2 mm open top and bottom enclosure component for compatible 1250 mm deep and 400 mm wide low-voltage switchgear cabinets with designated IP30/IP40 protection configurations.
£133.70
The ABB 1STQ008301B0000 is a 2 mm open top and bottom enclosure panel component designed for compatible ABB System Pro E Power low-voltage switchgear and electrical distribution assemblies. Specified for an enclosure configuration with a 1250 mm depth and 400 mm width, this accessory supports the construction of modular electrical cabinets with designated IP30/IP40 protection arrangements.
As part of the ABB System Pro E Power range, this component is intended for professional electrical panel builders and switchboard manufacturers requiring enclosure accessories matched to specific cabinet dimensions. Its open top and bottom configuration provides a defined structural arrangement for compatible distribution enclosure installations, while the 2 mm material thickness supports the construction requirements of the designated assembly.
With a specified 2 mm thickness, 1250 mm depth and 400 mm width, the ABB 1STQ008301B0000 is suitable for System Pro E Power configurations requiring the corresponding open top and bottom component. The product designation references IP30/IP40 protection arrangements, with the final enclosure protection rating dependent on the complete assembly, associated accessories and installation conditions.
The ABB 1STQ008301B0000 open top and bottom component supports the construction of compatible System Pro E Power switchgear enclosures. Its specified dimensions allow panel builders to identify the appropriate accessory for a cabinet arrangement with a nominal depth of 1250 mm and width of 400 mm. The open configuration is intended for use within the corresponding modular enclosure design, where the arrangement of structural components and supplementary accessories determines the completed assembly.
The ABB System Pro E Power series is developed for modular low-voltage power distribution systems, including main distribution boards and industrial switchgear assemblies. The range provides coordinated enclosure components for professional panel-building applications. For installations requiring IP30 or IP40 protection, the complete cabinet must be assembled using the appropriate compatible components and ABB installation instructions. The stated protection configurations should not be interpreted as an independently verified ingress protection rating for the individual open component.
| Series | System Pro E Power |
|---|---|
| Model / order code | 1STQ008301B0000 |
| Product designation | 2MM OPEN TOP BOTTOM IP30/40 D1250 W400 |
| Product type | Open top and bottom enclosure component |
| Accessory category | Electrical enclosure structural accessories |
| Specified thickness | 2 mm |
| Nominal enclosure depth | 1250 mm |
| Nominal enclosure width | 400 mm |
| Top configuration | Open |
| Bottom configuration | Open |
| Designated protection configurations | IP30 / IP40 |
| Compatible product family | ABB System Pro E Power |
| Application | Modular electrical enclosure assembly |
| Equipment category | Low-voltage switchgear and distribution enclosure accessories |
| Installation environment | Electrical distribution cabinets and switchgear assemblies |
| Mounting application | Integration into a compatible modular enclosure structure |
The ABB 1STQ008301B0000 is an open top and bottom enclosure component intended for compatible ABB System Pro E Power low-voltage distribution assemblies. It is specified for a 1250 mm depth and 400 mm width cabinet configuration.
The product designation specifies a 2 mm thickness, 1250 mm nominal enclosure depth and 400 mm nominal enclosure width. These are the designated installation specifications and should not be interpreted as a complete set of external product dimensions.
The IP30/IP40 designation identifies the enclosure protection configurations associated with the component. Under IEC 60529, IP30 provides protection against access by objects of at least 2.5 mm, while IP40 provides protection against objects of at least 1 mm. Neither rating provides a specified water ingress protection level. The completed enclosure must meet the applicable protection requirements.
The component belongs to the ABB System Pro E Power product group, which is designed for modular low-voltage electrical distribution assemblies. Compatibility should be confirmed against the specific enclosure configuration and ABB assembly instructions.
No. The ABB 1STQ008301B0000 is an enclosure component intended for integration into a compatible System Pro E Power assembly. Additional enclosure structures, panels, fixings or accessories may be required depending on the final switchgear configuration.
ABB System Pro E Power enclosure accessories support electrical panel builders, switchboard manufacturers and industrial engineers in constructing modular low-voltage distribution systems. The ABB 1STQ008301B0000 provides a specified 2 mm open top and bottom component for compatible 1250 mm deep and 400 mm wide enclosure configurations, supporting consistent component selection and professional switchgear assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.