Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB BF2502 System Pro E Power flexible electrical connection bars, order code 1STQ008223A0000, supplied as two 20 x 5 mm bars with a specified 400 A current rating and 2 m length per bar for compatible low-voltage switchboard power connections.
£288.91
The ABB BF2502, order code 1STQ008223A0000, is a set of two flexible electrical connection bars from the ABB System Pro E Power range. Each bar features nominal conductor dimensions of 20 × 5 mm and a specified length of 2 m, with a product current rating of 400 A. Designed for compatible low-voltage electrical distribution assemblies, these flexible bars provide a practical connection solution where conductor routing flexibility and efficient use of switchboard space are important.
As part of the ABB System Pro E Power modular switchboard system, the BF2502 supports electrical power connections between compatible switchgear components, busbar arrangements and distribution equipment. Its flexible construction allows suitable bends and offsets to be incorporated into conductor routes, helping electrical panel builders accommodate equipment positioning and connection geometry that may be difficult to achieve using conventional rigid busbars.
Supplied as two flexible bars, each measuring 2 m in length, the BF2502 provides a convenient component set for professional switchboard construction. The combination of a 20 × 5 mm conductor profile and 400 A specified current rating makes it suitable for appropriately engineered power distribution connections in industrial, commercial and infrastructure electrical installations.
Flexible electrical connection bars are used in low-voltage switchboard assemblies where the relative positions of circuit breakers, busbars and other electrical equipment require conductors to follow non-linear routes. Compared with rigid busbar arrangements, flexible bars can accommodate suitable bends and offsets, allowing panel builders to establish practical connection paths while maintaining the necessary electrical clearances, mechanical support and installation accessibility.
The ABB BF2502 provides two 20 × 5 mm flexible bars, each 2 m long, with a specified 400 A current rating. These characteristics support the design of compatible electrical connections within ABB System Pro E Power assemblies. Final suitability must be verified against the complete installation requirements, including conductor routing, operating temperature, termination methods, electrical clearances, short-circuit withstand capability and any applicable ABB derating guidance. The specified current rating does not establish an unconditional current-carrying capacity for every installation arrangement.
| Product range | System Pro E Power |
|---|---|
| Product designation | BF2502 |
| ABB order code | 1STQ008223A0000 |
| Product type | Flexible electrical connection bars |
| Quantity supplied | 2 bars |
| Nominal bar dimensions | 20 × 5 mm |
| Nominal bar width | 20 mm |
| Nominal bar thickness | 5 mm |
| Nominal geometric cross-sectional area | 100 mm² per bar |
| Specified current rating | 400 A |
| Length per bar | 2 m |
| Combined supplied bar length | 4 m |
| Conductor configuration | Flexible bar |
| System compatibility | ABB System Pro E Power |
| Equipment category | Electrical connection and busbar accessories |
| Application | Low-voltage switchboard power connections |
The ABB BF2502 is a set of two flexible electrical connection bars intended for compatible low-voltage power distribution assemblies, including ABB System Pro E Power switchboards where flexible conductor routing is required.
The BF2502 product specification identifies a set of 2 flexible bars, each measuring 2 m in length.
Each flexible bar has nominal conductor dimensions of 20 × 5 mm, corresponding to a nominal geometric cross-sectional area of 100 mm² per bar.
The ABB BF2502 has a specified current rating of 400 A. Actual application suitability depends on installation conditions, conductor routing, terminations and the relevant ABB technical requirements.
Each bar is specified with a length of 2 m. As the product contains two bars, the combined supplied bar length is 4 m.
The ABB BF2502 contains two 20 × 5 mm flexible bars with a specified rating of 400 A, while the ABB BF1602 contains two 20 × 3 mm flexible bars rated at 250 A. Both products have a specified bar length of 2 m.
The BF2502 belongs to the ABB System Pro E Power range of low-voltage switchboard components and accessories.
Flexible bars can be useful where electrical connections require bends or offsets that are less convenient with rigid busbars. However, any substitution must be verified against the required current rating, connection geometry, short-circuit withstand performance and relevant ABB installation instructions.
The manufacturer's order code is 1STQ008223A0000, identifying the ABB BF2502 set of two 20 × 5 mm flexible bars, rated at 400 A and supplied in 2 m lengths.
ABB System Pro E Power flexible connection accessories support professional low-voltage switchboard construction, helping electrical engineers, panel builders and switchgear manufacturers develop practical conductor arrangements for compatible power distribution equipment while maintaining the electrical and mechanical requirements of the completed assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.