Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVCE1241 System Pro E Power circuit breaker installation kit, order code 1STQ008184A0000, designed for compatible Emax 2 E1.2 F/F-I and Tmax XT7 F-M/F-MI configurations with 3-pole or 4-pole arrangements in 600 mm wide low-voltage switchboard sections.
£227.71
The ABB PVCE1241, order code 1STQ008184A0000, is a dedicated circuit breaker installation kit from the ABB System Pro E Power range. Designed for compatible ABB SACE Emax 2 E1.2 and ABB SACE Tmax XT7 circuit breaker configurations, this accessory supports the integration of 3-pole and 4-pole devices into low-voltage switchboard assemblies with a nominal section width of 600 mm.
The PVCE1241 is identified for E1.2 F/F-I and XT7 F-M/F-MI configurations, providing a coordinated installation solution for the corresponding breaker executions. Its application-specific design helps electrical panel builders organise circuit breaker mounting positions within compatible System Pro E Power switchboards while maintaining a consistent modular assembly arrangement.
As part of ABB's professional low-voltage power distribution system, the PVCE1241 installation kit supports switchboard construction projects involving Emax 2 E1.2 and Tmax XT7 circuit breakers. The specified 600 mm width and 3–4 pole compatibility make it a practical choice for electrical engineers and switchgear manufacturers working with the relevant ABB circuit breaker and enclosure combinations.
Modern low-voltage switchboards require appropriately coordinated mounting arrangements for circuit breakers, busbar connections and associated operating equipment. ABB SACE Emax 2 and SACE Tmax XT circuit breakers are used in electrical distribution applications where switching, isolation and circuit protection functions depend on the selected device and its configuration. Using an installation kit intended for the specific breaker frame and switchboard arrangement helps panel builders maintain a consistent mechanical layout.
The ABB PVCE1241 is specified for E1.2 F/F-I and XT7 F-M/F-MI configurations in 3-pole or 4-pole arrangements within a nominal 600 mm wide System Pro E Power section. It is an installation accessory rather than a complete circuit breaker and does not independently provide switching or protective functions. Before assembly, the precise breaker execution, mounting orientation, electrical connections, operating clearances and any additional accessories should be checked against the applicable ABB technical documentation.
| Product range | System Pro E Power |
|---|---|
| Product designation | PVCE1241 |
| ABB order code | 1STQ008184A0000 |
| Product type | Circuit breaker installation kit |
| Compatible circuit breaker series | SACE Emax 2 / SACE Tmax XT |
| Emax 2 frame | E1.2 |
| Tmax XT frame | XT7 |
| E1.2 installation designation | F/F-I |
| XT7 installation designation | F-M/F-MI |
| Number of poles | 3 / 4 |
| Nominal switchboard section width | 600 mm |
| System compatibility | ABB System Pro E Power |
| Equipment category | Circuit breaker mounting and installation accessories |
| Application | Low-voltage switchboard circuit breaker integration |
| Installation requirement | Matching ABB breaker execution and switchboard assembly configuration |
The ABB PVCE1241 is a circuit breaker installation kit designed for compatible ABB SACE Emax 2 E1.2 and SACE Tmax XT7 configurations within System Pro E Power low-voltage switchboard assemblies.
The PVCE1241 is specified for ABB SACE Emax 2 E1.2 F/F-I and ABB SACE Tmax XT7 F-M/F-MI configurations. The precise breaker execution must be checked against the relevant ABB installation documentation.
Yes. The PVCE1241 is designated for compatible 3-pole and 4-pole circuit breaker arrangements within the specified ABB switchboard configuration.
The PVCE1241 is specified for a nominal 600 mm wide ABB System Pro E Power switchboard section.
These are the breaker configuration designations included in the ABB PVCE1241 product specification. They identify the relevant E1.2 and XT7 installation arrangements; exact execution compatibility should be confirmed using the applicable ABB mounting instructions.
The PVCE1241 is identified as a circuit breaker installation kit, not a complete circuit breaker. The required E1.2 or XT7 breaker and any separately specified electrical connection accessories must be selected for the intended assembly.
The supplied specification identifies the Emax 2 E1.2 and Tmax XT7 configurations. Compatibility with other breaker frames should not be assumed without confirmation from ABB technical documentation.
Yes. The PVCE1241 is intended for compatible ABB System Pro E Power low-voltage switchboard assemblies, including industrial and commercial power distribution applications using the specified circuit breaker configurations.
The manufacturer's order code is 1STQ008184A0000, identifying the ABB PVCE1241 installation kit for E1.2 F/F-I and XT7 F-M/F-MI configurations, supporting 3-pole and 4-pole arrangements in a nominal 600 mm wide System Pro E Power section.
ABB System Pro E Power installation accessories support coordinated low-voltage switchboard construction, helping electrical engineers, panel builders and switchgear manufacturers integrate compatible Emax 2 and Tmax XT circuit breakers into professionally designed electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.