Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHCE1240 (1STQ008164A0000) is a System pro E Power installation kit for compatible ABB E1.2 W/W-I and XT7 W-M/W-MI circuit breaker configurations, designed for 3-pole and 4-pole horizontal arrangements in 600 mm wide low-voltage switchboards.
£218.47
The ABB PHCE1240 (1STQ008164A0000) is a dedicated horizontal circuit breaker installation kit for the ABB System pro E Power low-voltage switchboard system. Designed for compatible ABB E1.2 and XT7 circuit breaker arrangements, this installation accessory supports the integration of specified 3-pole and 4-pole devices into switchboard configurations with a nominal width of 600 mm.
As part of the ABB System pro E Power range, the PHCE1240 provides a manufacturer-specific installation solution for professional electrical distribution assemblies. Its official designation, KIT E1.2W/W-I-XT7 W-M/W-MI 3-4P H. W=600, identifies the supported breaker families and configuration codes, together with the horizontal arrangement and nominal switchboard width.
The ABB PHCE1240 is intended for switchboard manufacturers, electrical panel builders and installation engineers working with compatible System pro E Power assemblies. By providing a dedicated installation kit for the specified circuit breaker configurations, it supports consistent component selection and organised integration within modular low-voltage distribution equipment.
The ABB PHCE1240 installation kit is designed to support the integration of specified ABB circuit breaker arrangements into the System pro E Power switchboard platform. The manufacturer's designation identifies E1.2 W/W-I and XT7 W-M/W-MI configurations, making the kit relevant to switchboard designs incorporating these particular device arrangements. The exact breaker execution and installation requirements should be verified against the applicable ABB assembly documentation.
The horizontal configuration and 600 mm nominal switchboard width are important selection criteria when planning the electrical enclosure layout. Choosing an installation kit that matches the circuit breaker family, execution, pole configuration and switchboard dimensions helps panel builders establish the intended mechanical assembly arrangement.
The PHCE1240 is a circuit breaker installation kit rather than an electrical protection device. It does not independently provide switching, overload protection, short-circuit protection or a current rating. The complete installation requires an appropriately selected circuit breaker and any additional System pro E Power components specified for the chosen configuration. Electrical performance, mechanical compatibility and enclosure protection depend on the completed switchboard design and installation in accordance with ABB instructions.
| Series | System pro E Power |
|---|---|
| Manufacturer order code | 1STQ008164A0000 |
| Product designation | KIT E1.2W/W-I-XT7 W-M/W-MI 3-4P H. W=600 |
| Product type | Circuit breaker installation kit |
| Product category | Electrical switchboard accessories |
| Compatible circuit breaker families | ABB E1.2 and XT7 |
| E1.2 configurations | W/W-I, as designated by ABB |
| XT7 configurations | W-M/W-MI, as designated by ABB |
| Compatible pole configurations | 3-pole and 4-pole |
| Installation arrangement | Horizontal |
| Nominal switchboard width | 600 mm |
| Compatible enclosure system | ABB System pro E Power |
| Component function | Installation and mechanical integration of compatible circuit breaker configurations |
| Application | Low-voltage electrical distribution switchboards |
| Electrical protection function | Provided by the separately selected circuit breaker |
The ABB PHCE1240 is an installation kit for compatible ABB E1.2 and XT7 circuit breaker configurations within System pro E Power low-voltage switchboards. It is specified for 3-pole and 4-pole devices in a horizontal arrangement with a nominal switchboard width of 600 mm.
The manufacturer's designation identifies ABB E1.2 W/W-I and XT7 W-M/W-MI configurations. The kit is specified for compatible 3-pole and 4-pole arrangements. Exact device compatibility should be confirmed using the relevant ABB System pro E Power assembly documentation.
The PHCE1240 is specified for 600 mm nominal switchboard width within compatible ABB System pro E Power low-voltage distribution assemblies.
The ABB product designation specifies a horizontal installation arrangement. It should not be assumed suitable for vertical configurations without confirmation from the applicable ABB installation documentation.
No. The ABB PHCE1240 is identified as a circuit breaker installation kit, not a complete circuit breaker. The appropriate E1.2 or XT7 device and any additional components required for the selected switchboard configuration must be specified separately.
ABB System pro E Power installation accessories support modular, consistent and professional low-voltage electrical distribution assemblies. The PHCE1240 provides a dedicated installation kit for specified ABB E1.2 and XT7 circuit breaker configurations in 3-pole or 4-pole horizontal arrangements within 600 mm wide switchboard assemblies, supporting electrical panel manufacturers, contractors and industrial power distribution engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.