Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008121A0000 ABB PIEH0008 8 mm Socket Head Insert for Standard LS Handle System Pro E Power
ABB PIEH0008 (1STQ008121A0000) System Pro E Power 8 mm socket head insert designed for a compatible standard LS handle arrangement in modular low-voltage switchgear assemblies.
£18.10
Why Choose the ABB PIEH0008 8 mm Socket Head Insert?
The ABB PIEH0008 (1STQ008121A0000) is a dedicated 8 mm socket head insert designed for use with a compatible standard LS handle within the ABB System Pro E Power low-voltage switchgear enclosure system. This mechanical accessory provides the specified socket head interface for the associated handle arrangement, supporting the assembly and operation of compatible switchgear hardware.
As part of the ABB System Pro E Power range, the PIEH0008 is intended for electrical panel builders, switchgear manufacturers and maintenance engineers requiring purpose-designed components for compatible enclosure operating mechanisms. Its 8 mm socket head configuration enables integration with the designated standard LS handle arrangement, helping maintain consistency when selecting and installing switchgear accessories.
Identified by ABB order code 1STQ008121A0000, the PIEH0008 is a specific mechanical insert rather than a complete handle assembly. It is suitable for System Pro E Power applications where the manufacturer's installation documentation specifies an 8 mm socket head insert for the standard LS handle. Correct compatibility should be confirmed before installation.
Key Advantages
- Dedicated ABB System Pro E Power socket head insert for compatible switchgear hardware.
- Specified 8 mm socket head interface for the designated handle arrangement.
- Designed for use with a compatible standard LS handle.
- Supports mechanical integration within the relevant switchgear operating arrangement.
- Purpose-designed for the ABB System Pro E Power modular enclosure platform.
- Helps electrical panel builders select the correct manufacturer-specified handle accessory.
- Suitable for professional switchgear assembly, maintenance and compatible component replacement.
- Provides a dedicated accessory for industrial and commercial low-voltage distribution board installations.
Key Features
- ABB System Pro E Power modular switchgear accessory.
- PIEH0008 manufacturer product designation.
- 1STQ008121A0000 ABB manufacturer order code.
- 8 mm socket head insert configuration.
- Designed for a compatible standard LS handle.
- Dedicated mechanical interface component for the specified handle arrangement.
- Suitable for integration with compatible System Pro E Power operating hardware.
- Individual accessory component rather than a complete operating handle.
- Intended for professional electrical panel building and switchgear maintenance.
- Installation and compatibility requirements determined by the applicable ABB technical documentation.
Reliable Socket Head Integration for Switchgear Handle Assemblies
The ABB System Pro E Power range provides a modular platform for constructing low-voltage electrical distribution boards. Alongside enclosure structures and equipment mounting accessories, the system includes dedicated mechanical components for compatible switchgear operating and access arrangements.
The ABB PIEH0008 is identified as an 8 mm socket head insert for a standard LS handle. Its purpose is to provide the specified mechanical interface within the associated handle arrangement. Using the correct insert helps ensure that the selected handle components correspond to the configuration intended by the manufacturer.
Socket head inserts are mechanical interface components used where a compatible handle must engage with a designated operating arrangement. The PIEH0008 is specifically identified by its 8 mm size and associated standard LS handle application. The exact engagement geometry, operating mechanism and installation position should be confirmed using ABB's product-specific technical documentation.
Correct accessory selection is important in low-voltage switchgear because mechanical operating components must be compatible with the complete assembly. An insert with the specified nominal size should not automatically be assumed to fit other handles, mechanisms or enclosure systems. Installation should follow the applicable ABB System Pro E Power instructions, including any specified fixing and operating requirements.
The PIEH0008 is a socket head insert rather than a complete handle or locking assembly. The manufacturer description does not independently confirm the inclusion of the standard LS handle, additional fixing components or associated operating hardware. These must be identified separately where required. The insert does not itself provide electrical isolation, and all operation and maintenance activities must follow the relevant electrical safety procedures.
Typical Applications
- ABB System Pro E Power low-voltage switchgear assemblies.
- Compatible standard LS handle installations.
- 8 mm socket head interface applications within specified switchgear hardware.
- Industrial electrical distribution board construction.
- Commercial building power distribution switchboards.
- Assembly of compatible switchgear operating handle components.
- Professional switchboard manufacturing and electrical panel building.
- Maintenance and replacement of compatible System Pro E Power handle accessories.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| Product designation | PIEH0008 |
| ABB order code | 1STQ008121A0000 |
| Manufacturer description | SOCKET HEAD INSERT 8MM FOR ST.LS.HANDLE |
| Product type | Socket head insert |
| Product category | Low-voltage switchgear operating mechanism accessories |
| Socket head size | 8 mm |
| Associated handle | Standard LS handle |
| Accessory function | Mechanical socket head interface for compatible handle hardware |
| Installation system | ABB System Pro E Power |
| Compatible equipment | Standard LS handle arrangements specified for the PIEH0008 insert |
| Application | Mechanical integration of compatible switchgear handle components |
Frequently Asked Questions
What is the ABB PIEH0008 1STQ008121A0000 used for?
The ABB PIEH0008 is an 8 mm socket head insert designed for a compatible standard LS handle within the ABB System Pro E Power low-voltage switchgear system. It provides the specified mechanical interface for the associated handle arrangement.
What size is the ABB PIEH0008 socket head insert?
The PIEH0008 has a specified 8 mm socket head size. This is the nominal size identified in the manufacturer's product description. Other physical dimensions and interface details should be checked against ABB technical documentation.
Which handle is the ABB PIEH0008 designed for?
The PIEH0008 is specified for a standard LS handle. Compatibility with a particular handle model or operating mechanism should be confirmed using the relevant ABB System Pro E Power installation documentation.
Can the ABB PIEH0008 be used with other switchgear handles?
The PIEH0008 is specifically identified for the standard LS handle arrangement within ABB System Pro E Power. Compatibility with other handles or operating mechanisms should not be assumed solely because they use a nominal 8 mm interface.
Does the ABB PIEH0008 include the complete standard LS handle?
No. The PIEH0008 is specified as an 8 mm socket head insert, not a complete handle assembly. Any required standard LS handle, fixing accessories or associated operating components must be identified separately from the applicable ABB technical documentation.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power provides a modular platform for professional low-voltage switchgear construction. The PIEH0008 socket head insert offers a dedicated 8 mm mechanical interface for compatible standard LS handle arrangements, supporting correct accessory selection and consistent assembly within System Pro E Power electrical distribution boards.
