Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008116A0000 ABB PBRL0002 System pro E Power 2 Lifting Supports for Side-by-Side Structures
ABB PBRL0002 System pro E Power set of two lifting supports designed for compatible side-by-side low-voltage main distribution board structures and approved switchboard lifting arrangements.
£72.53
Why Choose the ABB PBRL0002 System pro E Power Lifting Supports?
The ABB PBRL0002 is a dedicated lifting support accessory set designed for use with compatible ABB System pro E Power low-voltage main distribution board structures. Supplied as a set of 2 lifting supports, this accessory is intended for side-by-side switchboard structural arrangements, providing designated lifting support points as part of an appropriately configured electrical distribution assembly.
As part of the ABB System pro E Power range, the PBRL0002 supports professional switchboard assembly, handling and installation. The System pro E Power platform is developed for modular low-voltage distribution boards, allowing electrical panel builders to construct coordinated switchboard assemblies using compatible structural components, enclosure accessories and mounting equipment.
The PBRL0002 lifting support set is specifically identified for side-by-side structures, making it relevant to switchboard configurations incorporating adjacent structural sections. Its dedicated ABB design helps installers select suitable lifting accessories for the intended assembly, subject to the manufacturer's specified mounting arrangements and lifting requirements.
Key Advantages
- Purpose-designed lifting supports for ABB System pro E Power switchboards.
- Supplied as a set of 2 lifting supports.
- Intended for compatible side-by-side structural arrangements.
- Provides designated lifting support points within an appropriately configured switchboard assembly.
- Supports professional handling and installation of modular electrical distribution structures.
- Part of ABB's coordinated System pro E Power accessory range.
- Suitable for industrial and commercial low-voltage switchboard projects.
- Genuine ABB component identified by order code 1STQ008116A0000.
Key Features
- ABB System pro E Power main distribution board accessory.
- PBRL0002 lifting support set.
- 2 lifting supports specified for the product.
- Designed for side-by-side switchboard structures.
- Dedicated structural lifting accessory for compatible ABB assemblies.
- Supports designated lifting arrangements during switchboard handling and installation.
- Integrates with appropriately configured System pro E Power structural components.
- Suitable for professional electrical panel-building applications.
- Intended for use in accordance with ABB assembly and lifting instructions.
- ABB manufacturer order code 1STQ008116A0000.
Reliable Lifting Support for Modular Switchboard Structures
Large low-voltage distribution boards frequently consist of multiple structural sections assembled together to accommodate protective devices, busbar systems and power distribution equipment. Appropriate lifting accessories are important when handling these assemblies during installation and positioning.
The ABB PBRL0002 provides a dedicated pair of lifting supports for compatible side-by-side System pro E Power structures. By using accessories designed for the intended switchboard system, panel builders can establish the specified lifting arrangement while maintaining compatibility with the structural configuration.
The permitted lifting load, attachment method, lifting angle and number of required support points depend on the complete switchboard assembly and ABB's applicable installation instructions. The PBRL0002 must therefore be installed and used only in an approved lifting configuration, with appropriate lifting equipment and the assembled structure's weight and centre of gravity taken into account.
Typical Applications
- ABB System pro E Power main distribution board assemblies.
- Side-by-side low-voltage switchboard structures.
- Industrial electrical distribution board installation.
- Commercial building power distribution assemblies.
- Switchboard handling and positioning during installation.
- Electrical panel-building and switchgear manufacturing facilities.
- Multi-section electrical distribution structures.
- Infrastructure and industrial power distribution projects.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ008116A0000 |
| Product type | Lifting support accessory set |
| Product family | Main distribution board structural accessories |
| Product description | N.2 Lifting Supports for Side by Side ST |
| Number of lifting supports | 2 |
| Structural configuration | Side-by-side structures |
| Application | Switchboard structural lifting support |
| Compatible system | ABB System pro E Power |
| Suitable product class | Low-voltage main distribution boards |
| Installation type | Structural accessory installation |
| Intended use | Supporting designated lifting arrangements for compatible switchboard structures |
Frequently Asked Questions
What is the ABB PBRL0002 used for?
The ABB PBRL0002 is a lifting support accessory set designed for compatible System pro E Power side-by-side switchboard structures. It provides designated lifting support points when installed as part of an approved structural lifting arrangement.
How many lifting supports are included in the PBRL0002?
The PBRL0002 is specified as a set of 2 lifting supports intended for compatible ABB System pro E Power structural configurations.
Which switchboard arrangement is the PBRL0002 designed for?
The PBRL0002 is specifically identified for side-by-side structures within the ABB System pro E Power low-voltage main distribution board range.
Can the PBRL0002 be used to lift a complete distribution board?
The PBRL0002 is a lifting support accessory, but its suitability for lifting a complete assembly depends on the approved ABB lifting configuration, the total assembly weight and the required number and positioning of lifting points. The applicable manufacturer instructions must be followed.
What is the ABB order code for the PBRL0002?
The manufacturer order code is 1STQ008116A0000, identifying the ABB PBRL0002 set of two lifting supports for compatible System pro E Power side-by-side structures.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power structural accessories support professional electrical panel builders in assembling, handling and installing modular low-voltage distribution boards. The PBRL0002 provides a dedicated two-piece lifting support solution for compatible side-by-side switchboard structures, supporting coordinated installation practices when used in accordance with ABB's specified lifting arrangements.
