Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ008086A0000 ABB PDCB1830 Blind Cable Compartment Door 1800 x 300mm
ABB PDCB1830 (1STQ008086A0000) System Pro E Power blind cable compartment door measuring 1800 mm high and 300 mm wide, designed for compatible low-voltage electrical distribution switchboard enclosures.
£104.53
Why Choose the ABB PDCB1830 Blind Door for System Pro E Power Cable Compartments?
The ABB PDCB1830 (1STQ008086A0000) is a purpose-designed blind door for electrical cable compartments within the ABB System Pro E Power modular low-voltage switchboard range. Featuring a nominal height of 1800 mm and width of 300 mm, this solid enclosure door provides a dedicated covering and access solution for compatible cable compartment arrangements in electrical distribution assemblies.
As part of the ABB System Pro E Power enclosure accessory range, the PDCB1830 supports professional electrical panel builders, switchgear manufacturers and industrial power distribution system designers. Its blind construction provides a continuous door surface without a glazed viewing window, making it suitable for cable compartments where direct observation of internal cables and terminations is not required during normal operation.
The PDCB1830 is specified as a blind door for a cable compartment measuring 1800 mm high × 300 mm wide. It is intended for compatible System Pro E Power switchboard structures requiring a solid door for a dedicated cable compartment. Its relatively narrow width supports the integration of cable access sections alongside other functional compartments within modular electrical distribution assemblies.
Key Advantages
- Dedicated cable compartment door: Designed for compatible ABB System Pro E Power cable compartment arrangements.
- Blind door construction: Provides a continuous solid door surface without a viewing window.
- 1800 mm nominal height: Matches the specified cable compartment configuration.
- 300 mm nominal width: Suitable for the corresponding narrow cable compartment section.
- Modular enclosure compatibility: Designed for integration with ABB System Pro E Power switchboard structures.
- Physical compartment coverage: Helps separate the internal cable installation space from surrounding accessible areas when correctly fitted.
- Professional appearance: Supports a consistent external finish across modular electrical distribution assemblies.
- Dedicated access arrangement: Provides a door configuration for authorised access to cable routing and termination areas.
- Application-specific dimensions: Helps panel builders select the appropriate door for the intended compartment size.
- Industrial and commercial applications: Suitable for professional low-voltage switchboard construction.
Key Features
- Part of the ABB System Pro E Power modular enclosure accessory range.
- PDCB1830 manufacturer product designation.
- ABB order code: 1STQ008086A0000.
- Blind door configuration for electrical cable compartments.
- Solid door surface without glazed viewing apertures.
- 1800 mm nominal height.
- 300 mm nominal width.
- Designed for compatible cable compartment sections within low-voltage switchboards.
- Supports enclosed cable routing and termination arrangements.
- Provides a dedicated door component for compatible compartment structures.
- Designed for coordinated installation with appropriate System Pro E Power mounting and enclosure accessories.
- Suitable for professional switchgear manufacturing and electrical panel building.
Technical Specifications
- Manufacturer: ABB
- Product range: System Pro E Power
- Product designation: PDCB1830
- ABB order code: 1STQ008086A0000
- Product type: Blind cable compartment door
- Door configuration: Blind / solid
- Intended compartment: Electrical cable compartment
- Nominal height: 1800 mm
- Nominal width: 300 mm
- Nominal dimensions (H × W): 1800 × 300 mm
- Compatible enclosure system: ABB System Pro E Power
- Installation arrangement: Cable compartment enclosure door
- Application: Low-voltage electrical distribution assemblies
- Accessory classification: Electrical switchboard enclosure door
Reliable Cable Compartment Coverage and Switchboard Integration
The ABB PDCB1830 blind door provides a dedicated enclosure component for compatible System Pro E Power cable compartments. Electrical distribution switchboards commonly incorporate separate spaces for incoming and outgoing cables, conductor routing and termination arrangements. A correctly selected compartment door helps establish the intended enclosure boundary while allowing authorised personnel to access the internal cable installation space when required.
The blind construction provides an uninterrupted external door surface without a viewing window. This makes the PDCB1830 suitable for cable compartments where equipment visibility is not a functional requirement. When correctly installed with the appropriate enclosure components, the door contributes to the physical separation of the compartment interior from the surrounding environment.
With its nominal 1800 mm height and 300 mm width, the PDCB1830 is designed for the corresponding System Pro E Power cable compartment configuration. The narrow door format is particularly relevant to modular switchboard layouts that allocate a dedicated section for cable routing and termination alongside other electrical distribution compartments. Compatibility with the enclosure frame, hinges, locking arrangement and associated hardware should be verified against ABB's applicable assembly documentation.
The PDCB1830 is a mechanical enclosure accessory rather than an electrical protection device. It does not independently establish an ingress protection rating or provide overload, short-circuit or earth-fault protection. The protective performance of the completed switchboard depends on the overall enclosure design, compatible components, correct installation and applicable assembly verification requirements.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Dedicated cable compartments within electrical distribution assemblies.
- Industrial main and sub-distribution switchboards.
- Commercial building electrical distribution enclosures.
- Switchboard sections accommodating incoming and outgoing power cables.
- Cable routing and termination compartments requiring solid front doors.
- Compatible cable compartments measuring 1800 mm high and 300 mm wide.
- Modular power distribution systems incorporating separate cable access sections.
- OEM switchgear manufacturing and professional electrical panel building.
- Switchboard construction and refurbishment using compatible ABB enclosure components.
Frequently Asked Questions
What is the ABB PDCB1830 used for?
The ABB PDCB1830 (1STQ008086A0000) is a blind door designed for compatible cable compartments within ABB System Pro E Power low-voltage electrical switchboards. It provides a solid enclosure door arrangement for the designated cable compartment configuration.
What are the dimensions of the ABB PDCB1830?
The PDCB1830 has a nominal height of 1800 mm and a nominal width of 300 mm, corresponding to the specified System Pro E Power cable compartment arrangement.
What does blind door mean in the PDCB1830 specification?
A blind door is a solid enclosure door without a glazed viewing window. The PDCB1830 provides a continuous external door surface for a compatible electrical cable compartment.
Which ABB enclosure system is compatible with the PDCB1830?
The PDCB1830 belongs to the ABB System Pro E Power modular switchboard range. It is intended for compatible cable compartment structures requiring a blind door with nominal dimensions of 1800 mm high × 300 mm wide.
Does the ABB PDCB1830 include the complete cable compartment or provide an IP rating on its own?
The PDCB1830 is identified as a blind cable compartment door rather than a complete cable compartment assembly. The required enclosure structure, mounting accessories and door hardware should be checked against ABB's assembly documentation. The door does not independently establish an IP protection rating; the completed enclosure's rating depends on its full construction and correct installation.
Designed for Professional Electrical Switchboard Builders
ABB System Pro E Power enclosure accessories provide purpose-designed solutions for constructing organised, modular low-voltage electrical distribution assemblies. The ABB PDCB1830 offers a dedicated blind cable compartment door measuring 1800 mm high × 300 mm wide, supporting consistent enclosure coverage, practical compartment access and coordinated integration into compatible professional switchboards.
