Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVDT6412 (1STQ008029A0000) is a System pro E Power vertical installation kit for three-pole and four-pole withdrawable Tmax T6 moulded case circuit breakers with motor-operated configuration compatibility, designed for 800 mm nominal-width low-voltage switchboard arrangements.
£243.11
The ABB PVDT6412 (1STQ008029A0000) is a dedicated Tmax T6 withdrawable motor-operated circuit breaker installation kit from the ABB System pro E Power range. Designed for compatible three-pole and four-pole ABB Tmax T6 moulded case circuit breakers (MCCBs), this kit supports vertical installation within an 800 mm wide low-voltage switchboard arrangement.
The manufacturer's designation, T6 KIT 3-4P WITH.MOT.VERT.INST. W=800MM, identifies the principal installation characteristics: ABB Tmax T6 compatibility, three-pole or four-pole construction, withdrawable mounting, motor-operated configuration compatibility, vertical installation and a nominal switchboard width of 800 mm.
As part of the ABB System pro E Power modular switchboard system, the PVDT6412 provides a purpose-designed mechanical installation solution for integrating compatible withdrawable Tmax T6 circuit breaker assemblies into professional electrical distribution equipment.
The ABB PVDT6412 is intended for switchboard manufacturers, electrical contractors and panel builders requiring an installation arrangement matched to the selected circuit breaker and operating configuration. Its designation identifies a kit for a withdrawable, motor-operated arrangement but does not establish that the circuit breaker, motor operator or withdrawal mechanism is included in the supplied product.
The ABB PVDT6412 is intended for switchboard designs where a compatible withdrawable Tmax T6 circuit breaker with a motor-operated arrangement must be installed vertically within an 800 mm wide System pro E Power configuration.
The 3-4P designation identifies support for three-pole and four-pole circuit breaker arrangements. This allows panel designers to select the required pole configuration while using a mounting kit specified for the corresponding Tmax T6 installation type. Compatibility with the exact breaker variant and associated equipment should be verified against ABB technical documentation.
A withdrawable circuit breaker arrangement uses an appropriate withdrawal and connection system rather than a permanently fixed mounting configuration. Depending on the complete breaker and withdrawal equipment selected, this arrangement may provide defined connected, test and disconnected positions and facilitate circuit breaker removal or replacement during maintenance.
These withdrawal features depend on the complete compatible circuit breaker assembly and its associated accessories. The PVDT6412 should not be assumed to contain a complete withdrawal mechanism or independently provide racking, isolation or interlocking functions.
The MOT. designation identifies compatibility with a motor-operated Tmax T6 configuration. When the correct circuit breaker, motor operating mechanism and control accessories are installed, the resulting assembly may support electrically actuated switching functions appropriate to the selected equipment.
Motor operation should not be confused with motorised withdrawal. The manufacturer's description identifies a motor-operated circuit breaker configuration but does not establish that the installation kit includes a motorised racking system. Remote switching, automatic control and associated electrical functions depend on the separately specified operating accessories and control system.
The combination of withdrawable mounting and motor-operated compatibility makes the PVDT6412 relevant to low-voltage distribution projects where the switchboard design calls for a removable breaker arrangement together with provision for suitable motor operating equipment.
The specified 800 mm switchboard width is an important selection criterion. This dimension identifies the nominal System pro E Power arrangement for which the kit is designated; it should not be interpreted as the physical width of the kit itself.
When planning installation, panel builders should verify the complete mechanical layout, including the selected Tmax T6 breaker, pole configuration, withdrawal equipment, motor operator, electrical connections, operating clearances, access requirements and any additional safety accessories.
The ABB PVDT6412 is a mechanical installation accessory. It does not independently provide circuit protection, electrical switching, motorised operation or a complete withdrawal system. Exact kit contents, compatible Tmax T6 variants and required supplementary components should be confirmed against the applicable ABB technical documentation before installation.
| Product group | System pro E Power |
|---|---|
| Product designation | PVDT6412 |
| ABB order code | 1STQ008029A0000 |
| Manufacturer product description | T6 KIT 3-4P WITH.MOT.VERT.INST. W=800MM |
| Product type | Withdrawable motor-operated circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax T6 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting configuration | Withdrawable |
| Operating arrangement compatibility | Motor-operated (MOT.) |
| Installation orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible withdrawable, motor-operated Tmax T6 circuit breaker assemblies |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVDT6412 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole withdrawable ABB Tmax T6 circuit breakers with a motor-operated arrangement within 800 mm wide System pro E Power switchboard configurations.
The PVDT6412 is specified for compatible ABB Tmax T6 moulded case circuit breakers in three-pole or four-pole withdrawable, motor-operated configurations. Exact breaker variants, withdrawal equipment, motor operators and associated accessories should be checked against ABB technical documentation.
WITH. identifies a withdrawable circuit breaker configuration, while MOT. identifies a motor-operated arrangement. Together, these designations specify an installation kit intended for compatible withdrawable Tmax T6 circuit breakers using an appropriate motor operating accessory.
The ABB PVDT6412 supports vertical installation within an 800 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for withdrawable Tmax T6 circuit breaker configurations with motor operator compatibility.
The PVDT6412 is identified as a circuit breaker installation kit, not a complete protective device assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax T6 circuit breaker and any required motor operating, withdrawal, connection or control accessories should be selected according to the switchboard design.
The ABB PVDT6412 (1STQ008029A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole withdrawable Tmax T6 circuit breakers with motor-operated configuration compatibility. With vertical mounting and a specified 800 mm switchboard width, it supports the mechanical integration of compatible protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.