Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVDT5406 (1STQ008006A0000) is a System pro E Power vertical installation kit for three-pole and four-pole fixed Tmax T5 moulded case circuit breakers with rotary handle drive compatibility. The manufacturer designation references 400 A and 630 A breaker ratings and an 800 mm nominal switchboard width.
£200.30
The ABB PVDT5406 (1STQ008006A0000) is a dedicated Tmax T5 fixed circuit breaker installation kit with rotary handle drive (RHD) compatibility from the ABB System pro E Power range. Designed for compatible three-pole and four-pole ABB Tmax T5 moulded case circuit breakers (MCCBs), this kit supports vertical installation within an 800 mm wide low-voltage switchboard arrangement.
The manufacturer's designation, T5 KIT 3-4P FIXED+RHD(400/630A)V.W=800MM, identifies the principal installation requirements: ABB Tmax T5 compatibility, three-pole or four-pole construction, fixed mounting, rotary handle drive compatibility, 400 A and 630 A circuit breaker rating references, vertical installation and a nominal switchboard width of 800 mm.
Part of the ABB System pro E Power modular switchboard system, the PVDT5406 provides a purpose-designed mechanical installation solution for integrating compatible fixed-mounted Tmax T5 circuit breakers into professional electrical distribution assemblies.
The ABB PVDT5406 is intended for switchboard manufacturers, electrical contractors and panel builders requiring a mounting arrangement matched to the selected breaker configuration. It is an installation accessory rather than a complete circuit breaker assembly, and its designation does not establish that the circuit breaker or rotary handle drive mechanism is included in the supplied kit.
The ABB PVDT5406 is intended for switchboard designs where a compatible fixed-mounted Tmax T5 circuit breaker with a rotary handle drive arrangement must be installed vertically within an 800 mm wide System pro E Power configuration.
The 3-4P designation identifies support for three-pole and four-pole circuit breaker arrangements. This allows panel designers to select the required pole configuration while using an installation kit specified for the appropriate Tmax T5 mounting type. Compatibility with the exact breaker variant should be verified against ABB technical documentation.
The manufacturer's 400 A and 630 A designations identify the circuit breaker ratings associated with this installation kit. These references should not be interpreted as independent current-carrying or protective ratings for the mechanical accessory. The electrical performance of the completed assembly depends on the selected circuit breaker, connections and overall switchboard design.
A fixed circuit breaker arrangement uses a non-withdrawable mounting configuration. Unlike plug-in or withdrawable versions, a fixed-mounted breaker is not designed around a dedicated plug-in or withdrawal connection system. The PVDT5406 should therefore be selected for the appropriate fixed Tmax T5 circuit breaker configuration.
The RHD designation identifies compatibility with a rotary handle drive operating arrangement. When the correct Tmax T5 breaker and operating accessories are installed, a suitable rotary handle mechanism enables manual operation of the circuit breaker. The precise operating arrangement, handle location and any door-coupling requirements depend on the selected accessories and switchboard design.
The PVDT5406 should not be confused with an installation kit intended for a motor-operated breaker. A rotary handle drive is a mechanical operating arrangement and does not, by itself, provide remote electrical switching or automatic operation.
The specified 800 mm switchboard width is an important selection criterion. This distinguishes the PVDT5406 from otherwise similar Tmax T5 installation kits intended for narrower System pro E Power arrangements. The nominal width refers to the applicable switchboard configuration, not necessarily the physical width of the kit.
When planning installation, panel builders should verify the complete mechanical layout, including the selected Tmax T5 circuit breaker, pole configuration, rating, rotary handle drive, electrical connections, operating clearances and access requirements.
The ABB PVDT5406 is a mechanical installation accessory. It does not independently provide circuit protection, electrical switching or a complete rotary handle operating mechanism. Exact kit contents and compatibility with specific Tmax T5 variants should be confirmed against the applicable ABB technical documentation before installation.
| Product group | System pro E Power |
|---|---|
| Product designation | PVDT5406 |
| ABB order code | 1STQ008006A0000 |
| Manufacturer product description | T5 KIT 3-4P FIXED+RHD(400/630A)V.W=800MM |
| Product type | Fixed rotary handle drive circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax T5 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Breaker rating references | 400 A / 630 A |
| Circuit breaker mounting configuration | Fixed |
| Operating arrangement compatibility | Rotary handle drive (RHD) |
| Installation orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible fixed-mounted Tmax T5 circuit breakers with rotary handle drive arrangements |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVDT5406 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole fixed ABB Tmax T5 circuit breakers with a rotary handle drive arrangement within 800 mm wide System pro E Power switchboard configurations. Its manufacturer designation references 400 A and 630 A breaker ratings.
The PVDT5406 is specified for compatible ABB Tmax T5 moulded case circuit breakers in three-pole or four-pole fixed-mounted configurations, with 400 A and 630 A rating references and rotary handle drive compatibility. Exact breaker variants and associated accessories should be checked against ABB technical documentation.
FIXED identifies a non-withdrawable circuit breaker mounting configuration, while RHD stands for Rotary Handle Drive. Together, these designations specify an installation kit intended for compatible fixed-mounted Tmax T5 circuit breakers using an appropriate rotary handle operating mechanism.
The ABB PVDT5406 supports vertical installation within an 800 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for fixed-mounted Tmax T5 circuit breaker configurations with rotary handle drive compatibility.
The PVDT5406 is identified as a circuit breaker installation kit, not a complete protective device assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax T5 circuit breaker and any required rotary handle drive, mounting, connection or operating accessories should be selected according to the switchboard design.
The ABB PVDT5406 (1STQ008006A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole fixed Tmax T5 circuit breakers with rotary handle drive compatibility. With 400 A and 630 A breaker rating references, vertical mounting and a specified 800 mm switchboard width, it supports the mechanical integration of compatible protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.