Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVDT5426 (1STQ008005A0000) is a System pro E Power vertical installation kit for three-pole and four-pole plug-in Tmax T5 moulded case circuit breakers with rotary handle drive compatibility. The manufacturer designation references a 400 A breaker rating and an 800 mm nominal switchboard width.
£195.49
The ABB PVDT5426 (1STQ008005A0000) is a dedicated Tmax T5 plug-in circuit breaker installation kit from the ABB System pro E Power range. Designed for compatible three-pole and four-pole ABB Tmax T5 moulded case circuit breakers (MCCBs), this kit supports vertical installation with a rotary handle drive (RHD) arrangement within an 800 mm wide low-voltage switchboard configuration.
The manufacturer's designation, T5 KIT 3-4P PLUG IN+RHD(400A)VER.W=800MM, identifies the key installation characteristics: ABB Tmax T5 circuit breaker compatibility, three-pole or four-pole construction, plug-in mounting, rotary handle drive compatibility, a 400 A circuit breaker rating reference, vertical installation and a nominal switchboard width of 800 mm.
As part of the ABB System pro E Power modular switchboard system, the PVDT5426 provides a purpose-designed mechanical installation solution for integrating compatible plug-in Tmax T5 circuit breaker assemblies into professional electrical distribution equipment.
The ABB PVDT5426 is intended for switchboard manufacturers, electrical contractors and panel builders requiring a mounting arrangement matched to the specified circuit breaker and operating configuration. It is an installation accessory rather than a complete circuit breaker assembly, and its designation does not establish that the circuit breaker, plug-in base or rotary handle mechanism is included.
The ABB PVDT5426 is intended for switchboard designs where a compatible plug-in Tmax T5 circuit breaker with a rotary handle drive arrangement must be installed vertically within an 800 mm wide System pro E Power configuration.
The 3-4P designation identifies support for three-pole and four-pole circuit breaker arrangements. This allows panel designers to select the required pole configuration while using a mounting kit specified for the appropriate Tmax T5 installation type. Compatibility with the exact circuit breaker variant should be verified against ABB technical documentation.
The manufacturer's 400 A designation identifies the circuit breaker rating associated with this installation arrangement. It should not be interpreted as an independent current-carrying or protective rating for the mechanical kit. The electrical performance of the completed assembly depends on the selected circuit breaker, connection equipment and overall switchboard design.
A plug-in circuit breaker arrangement uses a compatible plug-in connection system rather than the permanent connection arrangement associated with a fixed-mounted breaker. Depending on the complete equipment selected, this configuration can facilitate circuit breaker removal and replacement during maintenance.
Plug-in mounting is distinct from a fully withdrawable arrangement. The available operating positions, connection features and maintenance procedures depend on the selected breaker and associated equipment. All servicing operations must follow ABB instructions and appropriate electrical isolation procedures.
The RHD designation identifies compatibility with a rotary handle drive operating arrangement. When the correct Tmax T5 circuit breaker and operating accessories are installed, a suitable rotary handle mechanism provides manual operation of the breaker. The PVDT5426 itself does not independently provide electrical switching or a complete rotary handle mechanism.
The specified 800 mm switchboard width is an important selection criterion. This distinguishes the PVDT5426 from installation kits intended for narrower System pro E Power arrangements, even where the circuit breaker series, pole configuration, mounting type and operating arrangement are otherwise similar.
When planning the installation, panel builders should verify the complete mechanical layout, including the selected Tmax T5 circuit breaker, plug-in base, electrical connections, rotary handle drive, operating clearances and access requirements. The nominal switchboard width does not necessarily represent the physical width of the installation kit.
The ABB PVDT5426 is a mechanical installation accessory. It does not independently provide circuit protection, electrical switching or a complete plug-in connection system. Exact kit contents and compatibility with specific Tmax T5 variants should be confirmed against the applicable ABB technical documentation before installation.
| Product group | System pro E Power |
|---|---|
| Product designation | PVDT5426 |
| ABB order code | 1STQ008005A0000 |
| Manufacturer product description | T5 KIT 3-4P PLUG IN+RHD(400A)VER.W=800MM |
| Product type | Plug-in rotary handle drive circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax T5 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Breaker rating reference | 400 A |
| Circuit breaker mounting configuration | Plug-in |
| Operating arrangement compatibility | Rotary handle drive (RHD) |
| Installation orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible plug-in Tmax T5 circuit breaker assemblies with rotary handle drive arrangements |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVDT5426 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole plug-in ABB Tmax T5 circuit breakers with a rotary handle drive arrangement within 800 mm wide System pro E Power switchboard configurations. Its manufacturer designation references a 400 A circuit breaker rating.
The PVDT5426 is specified for compatible ABB Tmax T5 moulded case circuit breakers in three-pole or four-pole plug-in configurations, with a 400 A rating reference and rotary handle drive compatibility. Exact breaker variants and associated accessories should be checked against ABB technical documentation.
PLUG IN identifies a circuit breaker mounting configuration using a compatible plug-in connection system, while RHD stands for Rotary Handle Drive. Together, these designations specify an installation kit intended for compatible plug-in Tmax T5 circuit breakers using an appropriate rotary handle operating mechanism.
The ABB PVDT5426 supports vertical installation within an 800 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for plug-in Tmax T5 circuit breaker configurations with rotary handle drive compatibility.
The PVDT5426 is identified as a circuit breaker installation kit, not a complete protective device assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax T5 circuit breaker and any required plug-in base, rotary handle drive, connection or operating accessories should be selected according to the switchboard design.
The ABB PVDT5426 (1STQ008005A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole plug-in Tmax T5 circuit breakers with rotary handle drive compatibility. With a 400 A breaker rating reference, vertical mounting and a specified 800 mm switchboard width, it supports the mechanical integration of compatible protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.