Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVCT5404 (1STQ007991A0000) is a System pro E Power vertical installation kit for three-pole and four-pole fixed Tmax T5 moulded case circuit breakers with motor-operated configuration compatibility. The manufacturer designation references 400 A and 630 A breaker ratings and a 600 mm nominal switchboard width.
£171.11
The ABB PVCT5404 (1STQ007991A0000) is a dedicated Tmax T5 fixed motor-operated circuit breaker installation kit from the ABB System pro E Power range. Designed for compatible three-pole and four-pole ABB Tmax T5 moulded case circuit breakers (MCCBs), this kit supports vertical installation within a 600 mm wide low-voltage switchboard arrangement.
The manufacturer's designation, T5 KIT 3-4P FIXED MOT(400/630A)V.W=600MM, identifies the principal installation requirements: ABB Tmax T5 compatibility, three-pole or four-pole construction, fixed mounting, motor-operated configuration, 400 A and 630 A breaker rating references, vertical installation and a nominal switchboard width of 600 mm.
Part of the ABB System pro E Power modular switchboard system, the PVCT5404 provides a purpose-designed mechanical installation solution for integrating compatible fixed-mounted Tmax T5 circuit breakers with motor-operated arrangements into electrical distribution assemblies.
The ABB PVCT5404 is intended for professional switchboard manufacturers, electrical contractors and panel builders requiring a mounting kit matched to the selected breaker configuration. It is a mechanical installation accessory rather than a complete circuit breaker or motor operating mechanism.
The ABB PVCT5404 is intended for switchboard designs where a compatible fixed-mounted Tmax T5 circuit breaker with a motor-operated arrangement must be installed vertically within a 600 mm wide System pro E Power configuration.
Its designation supports both three-pole and four-pole breaker configurations and identifies 400 A and 630 A rating references. These ratings describe the compatible circuit breaker arrangements identified by ABB; they should not be interpreted as an independent current-carrying or protective rating for the mechanical installation kit.
A fixed circuit breaker installation uses a non-withdrawable mounting configuration. Unlike plug-in or withdrawable arrangements, a fixed-mounted breaker is not designed around a dedicated plug-in or withdrawal connection system. The PVCT5404 should therefore be selected for the appropriate fixed-mounted Tmax T5 configuration.
The MOT designation identifies compatibility with a motor-operated circuit breaker arrangement. When the correct Tmax T5 breaker, motor operator and associated controls are installed, motor operation may provide electrically actuated switching functions appropriate to the selected equipment.
The PVCT5404 itself does not provide motorised switching, remote control or automatic operation. Those functions depend on the separately specified circuit breaker, motor operating accessory, control circuit and overall electrical system design.
When planning the installation, panel builders should verify the selected Tmax T5 breaker variant, pole configuration, rating, motor operating mechanism, electrical connections and installation clearances. The 600 mm dimension refers to the nominal switchboard width specified by ABB, not necessarily the physical width of the kit.
The ABB PVCT5404 is a mechanical installation accessory. It does not independently provide circuit protection, electrical switching or a complete motor operating mechanism. The exact kit contents and compatibility with specific Tmax T5 variants should be confirmed against the applicable ABB technical documentation before installation.
| Product group | System pro E Power |
|---|---|
| Product designation | PVCT5404 |
| ABB order code | 1STQ007991A0000 |
| Manufacturer product description | T5 KIT 3-4P FIXED MOT(400/630A)V.W=600MM |
| Product type | Fixed motor-operated circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax T5 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Breaker rating references | 400 A / 630 A |
| Circuit breaker mounting configuration | Fixed |
| Operating arrangement compatibility | Motor-operated (MOT) |
| Installation orientation | Vertical |
| Nominal switchboard width | 600 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible fixed, motor-operated Tmax T5 circuit breaker assemblies |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVCT5404 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole fixed ABB Tmax T5 circuit breakers with a motor-operated arrangement within 600 mm wide System pro E Power switchboard configurations. Its manufacturer designation references 400 A and 630 A breaker ratings.
The PVCT5404 is specified for compatible ABB Tmax T5 moulded case circuit breakers in three-pole or four-pole fixed-mounted, motor-operated configurations, with 400 A and 630 A rating references. Exact breaker variants and operating accessories should be checked against ABB technical documentation.
FIXED identifies a non-withdrawable circuit breaker mounting configuration, while MOT identifies a motor-operated arrangement. Together, these designations specify an installation kit intended for compatible fixed-mounted Tmax T5 circuit breakers using an appropriate motor operating accessory.
The ABB PVCT5404 supports vertical installation within a 600 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for fixed-mounted Tmax T5 circuit breaker configurations with motor operator compatibility.
The PVCT5404 is identified as a circuit breaker installation kit, not a complete protective device assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax T5 circuit breaker and any required motor operating, mounting, connection or control accessories should be selected according to the switchboard design.
The ABB PVCT5404 (1STQ007991A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole fixed Tmax T5 circuit breakers with motor-operated configuration compatibility. With 400 A and 630 A breaker rating references, vertical mounting and a specified 600 mm switchboard width, it supports the mechanical integration of compatible protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.