Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007990A0000 ABB PVBT5404 T5 3-4P Fixed Motorised 400/630A Vertical Installation Kit W400 – System pro E power
ABB PVBT5404 1STQ007990A0000 System pro E power vertical installation kit for compatible fixed, motor-operated 3-pole and 4-pole ABB Tmax T5 moulded case circuit breakers in 400 A and 630 A configurations within 400 mm wide low-voltage electrical distribution switchboards.
£158.54
Why Choose the ABB PVBT5404 T5 Fixed Motorised Vertical Installation Kit?
The ABB PVBT5404 (1STQ007990A0000) is a dedicated vertical installation kit for fixed, motor-operated ABB Tmax T5 moulded case circuit breakers, designed for integration into compatible ABB System pro E power low-voltage electrical distribution switchboards. Identified by the manufacturer's designation T5 KIT 3-4P FIXED MOT(400/630A)V.W=400MM, this accessory supports the installation of compatible 3-pole and 4-pole Tmax T5 circuit breakers in 400 A and 630 A configurations.
As part of the ABB System pro E power range, the PVBT5404 provides a manufacturer-specific mounting arrangement for incorporating motor-operated circuit protection equipment into modular electrical distribution assemblies. Its fixed circuit breaker configuration and vertical installation orientation make it suitable for switchboard designs requiring the integration of compatible Tmax T5 devices with motor-operating mechanisms.
Designed for a 400 mm nominal switchboard width, the ABB 1STQ007990A0000 offers a dedicated installation solution for electrical panel builders working with narrower System pro E power enclosure configurations. The kit supports organised equipment positioning and helps simplify the selection of appropriate mounting accessories for industrial and commercial low-voltage distribution projects.
Key Advantages
- Genuine ABB System pro E power installation accessory for compatible modular low-voltage switchboards.
- Specifically designated for compatible ABB Tmax T5 moulded case circuit breakers.
- Supports 3-pole and 4-pole circuit breaker configurations.
- Designed for compatible 400 A and 630 A Tmax T5 devices.
- Dedicated fixed circuit breaker mounting arrangement.
- Suitable for motor-operated circuit breaker configurations.
- Vertical installation orientation for the specified switchboard layout.
- Designed for 400 mm nominal switchboard width.
- Supports organised integration of circuit protection equipment and associated operating mechanisms.
- Application-specific mounting arrangement helps simplify switchboard planning and accessory selection.
- Designed for integration with compatible ABB System pro E power enclosure components.
- Suitable for industrial, commercial and infrastructure electrical distribution installations.
Key Features
- Manufacturer: ABB.
- Product range: System pro E power.
- Manufacturer type: PVBT5404.
- ABB order code: 1STQ007990A0000.
- Product designation: T5 KIT 3-4P FIXED MOT(400/630A)V.W=400MM.
- Dedicated installation kit for compatible ABB Tmax T5 moulded case circuit breakers.
- 3-pole and 4-pole compatibility as specified by the manufacturer.
- 400 A and 630 A designated circuit breaker configurations.
- Fixed-mounted circuit breaker arrangement.
- Motor-operated circuit breaker application.
- Vertical installation orientation.
- 400 mm nominal switchboard width.
- Designed for compatible ABB System pro E power enclosure structures.
- Supports mechanical integration of fixed Tmax T5 circuit breakers with suitable motor-operating arrangements.
- Dedicated mounting accessory for professional electrical panel building and switchboard manufacturing.
Technical Specifications
- Manufacturer: ABB
- Product range: System pro E power
- Manufacturer type: PVBT5404
- ABB order code: 1STQ007990A0000
- Product designation: T5 KIT 3-4P FIXED MOT(400/630A)V.W=400MM
- Product type: Circuit breaker installation kit
- Accessory category: Moulded case circuit breaker mounting accessories
- Compatible circuit breaker series: ABB Tmax T5
- Compatible pole configurations: 3-pole / 4-pole
- Designated circuit breaker ratings: 400 A / 630 A
- Circuit breaker mounting configuration: Fixed
- Operating arrangement: Motor-operated circuit breaker application
- Installation orientation: Vertical
- Nominal switchboard width: 400 mm
- Mounting application: Installation of compatible fixed, motor-operated ABB Tmax T5 circuit breakers
- Compatible enclosure system: ABB System pro E power
- Equipment category: Low-voltage electrical distribution
- Application: Vertical installation of fixed, motor-operated moulded case circuit breakers within modular switchboards
Compact Vertical Integration of Motor-Operated Tmax T5 Circuit Breakers
The ABB PVBT5404 vertical installation kit is designed to support the integration of compatible fixed ABB Tmax T5 moulded case circuit breakers with motor-operated arrangements into System pro E power electrical distribution switchboards. Moulded case circuit breakers are important components in low-voltage electrical installations, providing switching and protection against overloads and short circuits when appropriately selected and configured.
The ABB Tmax T5 series forms part of ABB's Tmax moulded case circuit breaker family and is used in industrial and commercial electrical distribution applications. The PVBT5404 is specifically designated for 3-pole and 4-pole fixed T5 circuit breakers in 400 A and 630 A configurations. These current ratings describe the designated compatible circuit breaker configurations, not an independent electrical rating of the installation kit.
The manufacturer's FIXED MOT designation identifies an installation arrangement for fixed-mounted circuit breakers with motor-operated configurations. A compatible motor-operating mechanism can allow a suitably equipped circuit breaker to be operated through electrical control commands. Depending on the selected circuit breaker and control accessories, this may support local or remote switching functions within an appropriately designed distribution system.
The PVBT5404 does not independently provide motor operation or electrical protection. It is an installation accessory intended to accommodate the specified circuit breaker arrangement. The actual switching functionality, motor operator supply voltage, control interfaces and protection characteristics depend on the separately selected ABB Tmax T5 circuit breaker and associated operating equipment.
The kit's vertical installation orientation is intended for compatible System pro E power switchboard structures with a nominal width of 400 mm. This configuration is relevant where panel builders need to position fixed motor-operated circuit breakers within a narrower switchboard arrangement while coordinating electrical connections, operating access, cable routing and other internal components.
The wider ABB System pro E power range provides a modular platform for professional low-voltage switchboard construction. Its enclosure structures can be configured to accommodate protective switching devices, busbar systems, cable management arrangements and dedicated mounting accessories. The PVBT5404 complements this modular system by providing a manufacturer-specific installation solution for the designated Tmax T5 configuration.
Correct installation requires a compatible fixed 3-pole or 4-pole Tmax T5 circuit breaker, suitable motor-operating equipment and the appropriate System pro E power enclosure components. The circuit breaker model, operating mechanism, mechanical fixing, electrical connections, required clearances and associated accessories should be checked against ABB installation instructions. The completed low-voltage switchboard should be designed and verified in accordance with applicable IEC 61439 requirements.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Vertical installation of compatible fixed ABB Tmax T5 400 A circuit breakers with motor-operated arrangements.
- Vertical installation of compatible fixed ABB Tmax T5 630 A circuit breakers with motor-operated arrangements.
- Industrial electrical distribution panels and switchgear assemblies.
- Commercial building main and sub-distribution boards.
- Electrical distribution systems incorporating motor-operated circuit breakers.
- Manufacturing facilities and industrial plant power distribution equipment.
- Electrical switchrooms and infrastructure distribution installations.
- Professional electrical panel building and modular switchboard manufacturing.
- Switchboard projects requiring fixed, motor-operated Tmax T5 equipment within a 400 mm wide enclosure configuration.
- Electrical distribution assemblies incorporating compatible electrically operated switching arrangements.
Frequently Asked Questions
What is the ABB PVBT5404 1STQ007990A0000 used for?
The ABB PVBT5404 is a vertical installation kit designed for mounting compatible fixed, motor-operated ABB Tmax T5 moulded case circuit breakers within 400 mm wide ABB System pro E power low-voltage electrical distribution switchboards.
Which ABB circuit breaker ratings and pole configurations are supported by the PVBT5404?
The PVBT5404 is designated for compatible ABB Tmax T5 circuit breakers in 400 A and 630 A configurations, supporting 3-pole and 4-pole fixed devices with suitable motor-operating arrangements. Exact model compatibility should be confirmed against ABB installation documentation.
What does FIXED MOT mean in the ABB PVBT5404 designation?
The FIXED MOT designation identifies an installation arrangement for a fixed-mounted Tmax T5 circuit breaker with motor-operated functionality. The motor-operating mechanism and associated control components must be compatible with the selected circuit breaker and switchboard design.
What mounting orientation and switchboard width does the ABB PVBT5404 require?
The ABB PVBT5404 supports vertical installation of compatible fixed, motor-operated Tmax T5 circuit breakers within System pro E power switchboard structures with a nominal width of 400 mm.
Does the ABB PVBT5404 include the Tmax T5 circuit breaker or motor operator?
The ABB PVBT5404 is identified as an installation kit, not a complete Tmax T5 circuit breaker or motor-operating assembly. The compatible circuit breaker, motor operator and any additional electrical connection or control accessories should be selected according to the switchboard design and confirmed kit contents.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power installation accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PVBT5404 provides a dedicated vertical mounting solution for compatible fixed, motor-operated 3-pole and 4-pole ABB Tmax T5 circuit breakers in 400 A and 630 A configurations, helping electrical engineers and panel builders create organised, application-specific switching and circuit protection assemblies within 400 mm wide switchboard structures.
