Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007989A0000 ABB PVCT5406 T5 3-4P Fixed + RHD 400/630A Vertical Installation Kit W600 – System pro E power
ABB PVCT5406 1STQ007989A0000 System pro E power vertical installation kit for compatible fixed 3-pole and 4-pole ABB Tmax T5 moulded case circuit breakers in 400 A and 630 A configurations with RHD rotary handle arrangements within 600 mm wide low-voltage switchboards.
£161.42
Why Choose the ABB PVCT5406 T5 Fixed + RHD Vertical Installation Kit?
The ABB PVCT5406 (1STQ007989A0000) is a dedicated vertical installation kit for compatible ABB Tmax T5 moulded case circuit breakers, designed for integration into ABB System pro E power low-voltage electrical distribution switchboards. Identified by the manufacturer's designation T5 KIT 3-4P FIXED+RHD(400/630A)V.W=600MM, this accessory is intended for compatible 3-pole and 4-pole fixed Tmax T5 circuit breakers in 400 A and 630 A configurations, with an RHD operating arrangement.
As part of the ABB System pro E power range, the PVCT5406 provides a manufacturer-specific solution for installing circuit protection equipment within modular electrical distribution assemblies. Its dedicated vertical mounting configuration supports the integration of compatible fixed Tmax T5 devices with a rotary handle operating arrangement, helping electrical panel builders organise the positioning of switching and protection equipment.
Designed for a 600 mm nominal switchboard width, the ABB 1STQ007989A0000 is particularly suitable for industrial and commercial power distribution projects requiring fixed circuit breakers with rotary handle operation. The kit offers a purpose-designed installation arrangement for professional switchboard manufacturers, electrical contractors and panel builders working with compatible System pro E power enclosure structures.
Key Advantages
- Genuine ABB System pro E power installation accessory for compatible modular low-voltage switchboards.
- Specifically designated for compatible ABB Tmax T5 moulded case circuit breakers.
- Supports 3-pole and 4-pole circuit breaker configurations.
- Designed for compatible 400 A and 630 A Tmax T5 arrangements.
- Fixed circuit breaker mounting configuration for the specified installation.
- Supports an RHD rotary handle operating arrangement.
- Vertical installation orientation for organised switchboard layouts.
- Designed for 600 mm nominal switchboard width.
- Application-specific mounting solution helps simplify switchboard planning and component selection.
- Supports integration with compatible ABB System pro E power enclosure components.
- Suitable for industrial, commercial and infrastructure electrical distribution installations.
Key Features
- ABB System pro E power product range.
- Manufacturer type: PVCT5406.
- ABB order code: 1STQ007989A0000.
- Product designation: T5 KIT 3-4P FIXED+RHD(400/630A)V.W=600MM.
- Dedicated installation kit for compatible ABB Tmax T5 moulded case circuit breakers.
- 3-pole and 4-pole compatibility as specified in the manufacturer designation.
- 400 A and 630 A designated device configurations.
- Fixed-mounted circuit breaker arrangement.
- RHD rotary handle operating configuration.
- Vertical installation orientation.
- 600 mm nominal switchboard width.
- Designed for compatible ABB System pro E power enclosure structures.
- Supports mechanical integration of circuit protection equipment with a rotary handle operating arrangement.
- Dedicated mounting accessory for professional electrical panel building and switchboard manufacturing.
Technical Specifications
- Manufacturer: ABB
- Product range: System pro E power
- Manufacturer type: PVCT5406
- ABB order code: 1STQ007989A0000
- Product designation: T5 KIT 3-4P FIXED+RHD(400/630A)V.W=600MM
- Product type: Circuit breaker installation kit
- Accessory category: Moulded case circuit breaker mounting accessories
- Compatible circuit breaker series: ABB Tmax T5
- Compatible pole configurations: 3-pole / 4-pole
- Designated circuit breaker ratings: 400 A / 630 A
- Circuit breaker mounting configuration: Fixed
- Operating arrangement: RHD rotary handle configuration
- Installation orientation: Vertical
- Nominal switchboard width: 600 mm
- Mounting application: Installation of compatible fixed ABB Tmax T5 circuit breakers with RHD operating arrangements
- Compatible enclosure system: ABB System pro E power
- Equipment category: Low-voltage electrical distribution
- Application: Vertical installation of fixed moulded case circuit breakers with rotary handle operation within modular switchboards
Reliable Tmax T5 Integration with Rotary Handle Operation
The ABB PVCT5406 vertical installation kit is designed to support the integration of compatible fixed ABB Tmax T5 moulded case circuit breakers into System pro E power electrical distribution switchboards. Moulded case circuit breakers are important components in low-voltage electrical installations, providing circuit switching and protection against overloads and short circuits when appropriately selected and configured.
The ABB Tmax T5 series belongs to ABB's Tmax moulded case circuit breaker family and is used in industrial and commercial electrical distribution applications. The PVCT5406 is specifically designated for 3-pole and 4-pole fixed T5 configurations associated with 400 A and 630 A ratings. Its purpose is to provide the appropriate installation arrangement for the specified circuit breaker and operating configuration.
The manufacturer's FIXED+RHD designation identifies a fixed-mounted circuit breaker installation with a rotary handle operating arrangement. Rotary handle mechanisms allow compatible circuit breakers to be operated through an appropriate mechanical handle assembly. Depending on the selected device and accessories, the operating arrangement may be incorporated into a switchboard design requiring convenient manual switching access.
The PVCT5406 is an installation kit rather than a complete circuit breaker or rotary handle mechanism. The exact handle components, operating shaft arrangements and other associated accessories must be selected and verified against the applicable ABB documentation and the requirements of the finished assembly.
The kit's vertical installation orientation is intended for compatible System pro E power switchboard structures with a nominal width of 600 mm. This arrangement supports the planned positioning of the Tmax T5 circuit breaker while allowing electrical panel builders to coordinate busbar connections, cable routing, operating access and mechanical clearances.
The wider ABB System pro E power range provides a modular platform for professional low-voltage switchboard construction. Its configurable enclosure structures accommodate circuit protection devices, switch-disconnectors, busbar systems and dedicated installation accessories. The PVCT5406 complements this system by providing a manufacturer-specific mounting solution for the designated Tmax T5 configuration.
Correct installation requires a compatible fixed 3-pole or 4-pole Tmax T5 circuit breaker, the appropriate RHD operating components and a suitable System pro E power enclosure arrangement. Circuit breaker selection, mechanical fixing, electrical connections, operating clearances and accessory compatibility should be checked against ABB installation instructions. The complete low-voltage switchboard should be designed and verified in accordance with applicable IEC 61439 requirements.
Because the PVCT5406 is a mechanical installation accessory, it does not independently determine the circuit breaker's breaking capacity, trip unit characteristics, protection settings or electrical performance. These specifications depend on the selected ABB Tmax T5 circuit breaker and the overall electrical distribution design.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Vertical installation of compatible fixed ABB Tmax T5 400 A circuit breakers with RHD arrangements.
- Vertical installation of compatible fixed ABB Tmax T5 630 A circuit breakers with RHD arrangements.
- Industrial electrical distribution panels requiring rotary handle-operated circuit breakers.
- Commercial building main and sub-distribution boards.
- Manufacturing plant and industrial facility power distribution equipment.
- Electrical switchrooms and infrastructure distribution installations.
- Professional electrical panel building and modular switchboard manufacturing.
- Switchboard construction requiring fixed 3-pole or 4-pole Tmax T5 equipment within a 600 mm wide enclosure configuration.
- Electrical distribution assemblies incorporating compatible manual rotary handle operating mechanisms.
Frequently Asked Questions
What is the ABB PVCT5406 1STQ007989A0000 used for?
The ABB PVCT5406 is a vertical installation kit designed for mounting compatible fixed ABB Tmax T5 moulded case circuit breakers with RHD rotary handle operating arrangements within 600 mm wide ABB System pro E power low-voltage electrical distribution switchboards.
Which ABB circuit breaker ratings and pole configurations are supported by the PVCT5406?
The PVCT5406 is designated for compatible ABB Tmax T5 circuit breakers in 400 A and 630 A configurations, supporting 3-pole and 4-pole fixed devices. Exact circuit breaker and accessory compatibility should be confirmed against ABB installation documentation.
What does FIXED+RHD mean in the ABB PVCT5406 designation?
The FIXED+RHD designation identifies a fixed-mounted Tmax T5 circuit breaker installation with an RHD rotary handle operating arrangement. The appropriate handle mechanism and associated components must be compatible with the selected circuit breaker and switchboard design.
What mounting orientation and switchboard width does the ABB PVCT5406 require?
The ABB PVCT5406 supports vertical installation of compatible fixed Tmax T5 circuit breakers with RHD operating arrangements within System pro E power switchboard structures with a nominal width of 600 mm.
Does the ABB PVCT5406 include the Tmax T5 circuit breaker and rotary handle?
The ABB PVCT5406 is identified as an installation kit, not a complete Tmax T5 circuit breaker assembly. The compatible circuit breaker, rotary handle components and any additional connection or operating accessories should be selected according to the electrical design and confirmed kit contents.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power installation accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PVCT5406 provides a dedicated vertical installation solution for compatible fixed 3-pole and 4-pole ABB Tmax T5 circuit breakers in 400 A and 630 A configurations with RHD rotary handle arrangements, helping electrical engineers and panel builders create organised, application-specific circuit protection assemblies within 600 mm wide switchboard structures.
