Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVBX4400 (1STQ007978A0000) is a System pro E Power vertical installation kit designed for 3-pole and 4-pole withdrawable Tmax XT4 moulded case circuit-breakers with an RHD rotary handle arrangement in 400 mm wide low-voltage switchboard compartments.
£157.48
The ABB PVBX4400 is a dedicated withdrawable circuit-breaker installation kit from the ABB System pro E Power range. Designed for 3-pole and 4-pole ABB Tmax XT4 moulded case circuit-breakers, this accessory supports the integration of compatible withdrawable circuit-breaker assemblies with a rotary handle operating arrangement (RHD) into modular low-voltage electrical distribution switchboards.
Specifically configured for vertical installation in 400 mm wide switchboard compartments, the PVBX4400 provides a purpose-designed mechanical mounting solution for ABB Tmax XT4 circuit-breakers. Its withdrawable configuration supports circuit-breaker arrangements requiring appropriate withdrawal facilities, while the RHD designation identifies compatibility with the specified rotary handle operating arrangement.
As part of the ABB System pro E Power platform, the PVBX4400 helps electrical panel builders, switchboard manufacturers and industrial engineers create organised distribution assemblies with coordinated circuit-breaker positioning and operating equipment. Identified by ABB manufacturer order code 1STQ007978A0000, this installation kit is intended for applications where the circuit-breaker family, pole configuration, withdrawable execution, rotary handle arrangement and switchboard dimensions must be correctly matched.
The ABB PVBX4400 vertical installation kit provides a dedicated mechanical mounting arrangement for integrating compatible withdrawable Tmax XT4 circuit-breakers into System pro E Power distribution switchboards. Its application-specific configuration supports consistent equipment positioning and helps panel builders coordinate circuit-breaker mounting with the intended enclosure layout.
The kit is designed for 3-pole and 4-pole ABB Tmax XT4 circuit-breakers in withdrawable configuration. Withdrawable circuit-breaker arrangements use dedicated mechanical and electrical connection components that allow the circuit-breaker to be withdrawn in accordance with the manufacturer's operating instructions. This execution differs from fixed-mounted and plug-in circuit-breakers and requires appropriately specified withdrawal and connection equipment.
The RHD designation identifies the rotary handle operating arrangement associated with this installation kit. A compatible rotary handle mechanism provides a mechanical interface for operating the selected circuit-breaker. The precise handle configuration, coupling components and associated operating accessories must be selected according to ABB's applicable Tmax XT4 and System pro E Power documentation.
The specified vertical installation orientation and 400 mm compartment width are essential selection criteria. Correctly matching these characteristics helps ensure that the installation arrangement corresponds to the intended System pro E Power enclosure configuration. The selected XT4 circuit-breaker, withdrawal components, rotary handle mechanism and electrical connection accessories must be checked against ABB's compatibility documentation.
As part of the ABB System pro E Power platform, the PVBX4400 supports modular low-voltage switchboard construction for commercial and industrial applications. The completed installation must follow ABB's assembly instructions and applicable electrical standards, including requirements for electrical clearances, conductor routing, thermal performance, mechanical operation and safe maintenance access.
The PVBX4400 is a mechanical installation accessory and does not independently provide overload, short-circuit or earth-fault protection. These functions depend on the selected ABB Tmax XT4 circuit-breaker and its protection release. Safe circuit-breaker withdrawal and rotary handle operation depend on the complete, correctly installed assembly and its compatible operating and interlocking components.
| Product range | System pro E Power |
|---|---|
| Model / type | PVBX4400 |
| ABB order code | 1STQ007978A0000 |
| Manufacturer description | XT4 KIT 3-4P WITH. RHD VERT.INS. W=400MM |
| Product type | Circuit-breaker installation kit |
| Accessory category | Switchboard mounting and installation accessory |
| Compatible circuit-breaker series | ABB Tmax XT4 |
| Circuit-breaker technology | Moulded case circuit-breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit-breaker execution | Withdrawable |
| Operating arrangement | Rotary handle (RHD) |
| Installation orientation | Vertical |
| Nominal switchboard compartment width | 400 mm |
| Mounting application | Internal switchboard installation |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage electrical distribution assemblies |
| Product classification | Withdrawable circuit-breaker installation accessory with rotary handle compatibility |
The ABB PVBX4400 is a vertical installation kit designed for compatible 3-pole and 4-pole ABB Tmax XT4 withdrawable circuit-breakers with an RHD rotary handle arrangement in 400 mm wide System pro E Power switchboard compartments.
The PVBX4400 is specifically designated for ABB Tmax XT4 moulded case circuit-breakers in compatible 3-pole or 4-pole withdrawable configurations with the corresponding rotary handle operating arrangement. The selected circuit-breaker, withdrawal components and handle mechanism must meet ABB's compatibility requirements.
WITH. identifies the withdrawable circuit-breaker execution, while RHD identifies the rotary handle operating arrangement. Together, these designations indicate that the kit is intended for a compatible withdrawable Tmax XT4 circuit-breaker installation with rotary handle operation.
Yes. The manufacturer description specifies compatibility with 3-pole and 4-pole ABB Tmax XT4 circuit-breakers, provided the selected devices use the appropriate withdrawable configuration and compatible rotary handle arrangement.
The PVBX4400 is designed for 400 mm wide ABB System pro E Power switchboard compartments with a vertical circuit-breaker installation arrangement.
The PVBX4400 is specifically designated for vertical installation. Horizontal installations require an appropriately specified ABB mounting kit compatible with the selected circuit-breaker, operating arrangement and switchboard configuration.
The PVBX4400 is specifically identified for withdrawable Tmax XT4 circuit-breakers. Fixed-mounted and plug-in executions require installation arrangements designed for their respective mechanical configurations.
The PVBX4400 is designed for 3-pole or 4-pole withdrawable Tmax XT4 circuit-breakers with an RHD rotary handle arrangement in 400 mm wide compartments, whereas the PVCX4412 is specified for 3-pole or 4-pole withdrawable Tmax XT4 circuit-breakers with a motor-operated arrangement in 600 mm wide compartments. Both are vertical installation kits within the ABB System pro E Power range.
The PVBX4400 is identified as a circuit-breaker installation kit, not a complete circuit-breaker assembly. The manufacturer description does not establish whether a circuit-breaker, withdrawal mechanism, rotary handle or other connection accessories are included. Exact kit contents should be confirmed against ABB's official documentation, with additional components specified separately where required.
No. The PVBX4400 is a mechanical installation accessory. Electrical protection functions are supplied by the selected ABB Tmax XT4 circuit-breaker and its appropriate protection release.
A compatible withdrawable circuit-breaker arrangement can support inspection, maintenance and equipment replacement procedures by allowing the circuit-breaker to be withdrawn using its approved mechanical and electrical connection system. Safe operation depends on the complete assembly, its interlocks and ABB's prescribed procedures.
The ABB manufacturer order code is 1STQ007978A0000, corresponding to the PVBX4400 Tmax XT4 3/4-pole withdrawable RHD vertical installation kit for 400 mm wide System pro E Power switchboards.
ABB System pro E Power installation accessories support professional low-voltage switchboard construction through dedicated mechanical mounting solutions. The PVBX4400 provides a coordinated approach to integrating withdrawable, rotary handle-operated Tmax XT4 circuit-breakers into modular electrical distribution assemblies, supporting consistent equipment positioning, organised internal layouts and practical switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.