Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVBX4412 (1STQ007976A0000) is a System pro E Power vertical installation kit for three-pole and four-pole withdrawable Tmax XT4 moulded case circuit breakers with motor-operated configuration compatibility, designed for 400 mm wide low-voltage switchboard arrangements.
£157.48
The ABB PVBX4412 (1STQ007976A0000) is a dedicated Tmax XT4 withdrawable motor-operated circuit breaker installation kit from the ABB System pro E Power range. Designed for compatible three-pole and four-pole ABB Tmax XT4 moulded case circuit breakers (MCCBs), this kit supports vertical installation within a 400 mm wide low-voltage switchboard arrangement.
Part of the ABB System pro E Power modular switchboard system, the PVBX4412 provides a purpose-designed mechanical installation solution for integrating compatible withdrawable Tmax XT4 circuit breaker assemblies with motor-operated configurations. It is intended for professional switchboard manufacturers, electrical contractors and panel builders requiring a mounting arrangement matched to the specified breaker installation and operating requirements.
The manufacturer's designation, XT4 KIT 3-4P WITH.MOT. VERT.INST.W=400MM, identifies the principal compatibility characteristics: ABB Tmax XT4 circuit breakers, three-pole or four-pole configurations, withdrawable mounting, motor-operated arrangements, vertical installation and a nominal switchboard width of 400 mm.
The ABB PVBX4412 is a mechanical installation accessory rather than a complete circuit breaker assembly. Its designation identifies compatibility with the specified withdrawable, motor-operated configuration but does not establish that the circuit breaker, motor operator or withdrawal mechanism is included in the supplied kit.
The ABB PVBX4412 is intended for switchboard designs where a compatible withdrawable Tmax XT4 circuit breaker with a motor-operated arrangement must be installed vertically within a 400 mm wide System pro E Power configuration. Its support for both three-pole and four-pole breakers allows panel designers to select the appropriate pole arrangement while using a kit specified for the required mounting and operating configuration.
A withdrawable circuit breaker arrangement uses a suitable withdrawal and connection system rather than a permanently fixed installation. Depending on the selected breaker and withdrawal equipment, the complete assembly may support defined connected, test and disconnected positions and facilitate maintenance access. These capabilities depend on the associated withdrawable equipment and accessories, not on the PVBX4412 installation kit alone.
The MOT. designation identifies compatibility with a motor-operated Tmax XT4 configuration. A correctly specified motor operator may enable electrical operation of the circuit breaker as part of an appropriately designed control system. However, the actual operating functions, control supply requirements, wiring arrangements and permissible accessories depend on the selected circuit breaker and motor operating mechanism.
The combination of withdrawable mounting and motor-operated compatibility makes the PVBX4412 relevant to switchboard designs requiring both a withdrawable protective device arrangement and provision for an appropriate motor operating accessory. The kit should not be assumed to provide remote operation, automatic switching or control functionality by itself.
For a vertical installation in a nominal 400 mm wide switchboard, the panel builder must verify the complete mechanical layout, including the selected Tmax XT4 breaker, withdrawal components, motor operator, electrical connections, access requirements and installation clearances. The nominal switchboard width does not represent the physical width of the installation kit.
The ABB PVBX4412 is a mechanical installation accessory. It does not independently provide circuit protection, switching functionality, motorised operation or a complete withdrawal mechanism. Exact kit contents and compatibility with specific Tmax XT4 variants should be confirmed against the applicable ABB technical documentation before installation.
| Product group | System pro E Power |
|---|---|
| Product designation | PVBX4412 |
| ABB order code | 1STQ007976A0000 |
| Manufacturer product description | XT4 KIT 3-4P WITH.MOT. VERT.INST.W=400MM |
| Product type | Withdrawable motor-operated circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax XT4 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting configuration | Withdrawable |
| Operating arrangement compatibility | Motor-operated (MOT.) |
| Installation orientation | Vertical |
| Nominal switchboard width | 400 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible withdrawable, motor-operated Tmax XT4 circuit breaker assemblies |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVBX4412 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole withdrawable ABB Tmax XT4 circuit breakers with a motor-operated arrangement within 400 mm wide System pro E Power switchboard configurations.
The PVBX4412 is specified for ABB Tmax XT4 moulded case circuit breakers in three-pole or four-pole withdrawable, motor-operated configurations. The exact breaker variant, motor operator, withdrawal equipment and associated accessories should be checked against ABB technical documentation.
WITH. identifies a withdrawable circuit breaker configuration, while MOT. identifies a motor-operated arrangement. Together, these designations specify an installation kit intended for compatible withdrawable Tmax XT4 circuit breakers using an appropriate motor operating accessory.
The ABB PVBX4412 supports vertical installation within a 400 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for withdrawable Tmax XT4 circuit breaker configurations with motor operator compatibility.
The PVBX4412 is identified as a circuit breaker installation kit, not a complete protective device assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax XT4 circuit breaker and any required motor operating, withdrawal, connection or control accessories should be selected according to the switchboard design.
The ABB PVBX4412 (1STQ007976A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole withdrawable Tmax XT4 circuit breakers with motor-operated configuration compatibility. With vertical mounting and a specified 400 mm switchboard width, it supports the mechanical integration of suitable protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.