Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVCX4410 (1STQ007975A0000) is a System pro E Power vertical installation kit for three-pole and four-pole withdrawable Tmax XT4 moulded case circuit breakers, designed for 600 mm wide low-voltage switchboard arrangements.
£152.63
The ABB PVCX4410 (1STQ007975A0000) is a dedicated Tmax XT4 withdrawable circuit breaker installation kit from the ABB System pro E Power range. Designed for compatible three-pole and four-pole ABB Tmax XT4 moulded case circuit breakers (MCCBs), this kit supports vertical installation within a 600 mm wide low-voltage switchboard arrangement.
As part of the ABB System pro E Power modular switchboard system, the PVCX4410 provides a purpose-designed mechanical installation solution for integrating compatible withdrawable Tmax XT4 circuit breaker assemblies into electrical distribution equipment. It is intended for professional electrical panel builders, switchboard manufacturers and electrical contractors requiring a mounting arrangement specifically suited to withdrawable circuit breakers.
The manufacturer's designation, XT4 KIT 3-4P WITHDRAW. VERT.INS.W=600MM, identifies the principal compatibility requirements: ABB Tmax XT4 circuit breakers, three-pole or four-pole configurations, withdrawable mounting, vertical installation and a nominal switchboard width of 600 mm.
Unlike installation kits intended for fixed or plug-in circuit breakers, the ABB PVCX4410 is specified for a withdrawable Tmax XT4 arrangement. Selecting the appropriate installation kit helps ensure that the intended breaker configuration is matched to the physical requirements of the switchboard assembly.
The ABB PVCX4410 is intended for switchboard designs where a compatible withdrawable Tmax XT4 circuit breaker must be installed vertically within a 600 mm wide System pro E Power arrangement. Its support for both three-pole and four-pole configurations allows panel designers to select the required pole arrangement while using an installation kit specified for the corresponding withdrawable breaker configuration.
A withdrawable circuit breaker arrangement differs from fixed and plug-in configurations because it uses an appropriate withdrawal mechanism and associated connection system. Depending on the selected equipment, this can provide defined connected, test and disconnected positions and facilitate breaker removal or replacement during maintenance. These capabilities depend on the complete withdrawable circuit breaker assembly and its accessories, not on the PVCX4410 installation kit alone.
The vertical installation designation is important when planning the physical arrangement of components within the switchboard. Panel builders must account for the selected circuit breaker, withdrawal equipment, electrical connections, access requirements and installation clearances when confirming the overall assembly layout.
The manufacturer's description for 1STQ007975A0000 does not specify a rotary handle drive, motor operator or particular interlocking arrangement. Any operating mechanism requirements should therefore be established separately using the selected Tmax XT4 configuration and the applicable ABB technical documentation.
The ABB PVCX4410 is a mechanical installation accessory. It does not independently provide circuit protection, electrical switching or a complete withdrawal mechanism. The exact kit contents, compatible Tmax XT4 variants and any additional withdrawal, connection or operating components should be confirmed against ABB documentation before installation.
| Product group | System pro E Power |
|---|---|
| Product designation | PVCX4410 |
| ABB order code | 1STQ007975A0000 |
| Manufacturer product description | XT4 KIT 3-4P WITHDRAW. VERT.INS.W=600MM |
| Product type | Withdrawable circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax XT4 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting configuration | Withdrawable |
| Installation orientation | Vertical |
| Nominal switchboard width | 600 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible withdrawable Tmax XT4 circuit breaker assemblies |
| Application | Low-voltage electrical distribution switchboards |
The ABB PVCX4410 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole withdrawable ABB Tmax XT4 circuit breakers within 600 mm wide System pro E Power switchboard arrangements.
The PVCX4410 is specified for ABB Tmax XT4 moulded case circuit breakers in three-pole or four-pole withdrawable configurations. The exact breaker variant, withdrawal components and associated accessories should be checked against ABB technical documentation.
The ABB PVCX4410 supports vertical installation within a 600 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for withdrawable Tmax XT4 circuit breaker configurations.
WITHDRAW. stands for withdrawable. It identifies a circuit breaker mounting configuration designed for use with an appropriate withdrawal and connection system rather than a permanently fixed-mounted breaker. The PVCX4410 is specified for this withdrawable Tmax XT4 arrangement.
The PVCX4410 is identified as a circuit breaker installation kit, not a complete protective device assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax XT4 circuit breaker and any required withdrawal, connection or operating accessories should be selected according to the switchboard design.
The ABB PVCX4410 (1STQ007975A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole withdrawable Tmax XT4 circuit breakers. With vertical mounting and a specified 600 mm switchboard width, it supports the mechanical integration of compatible withdrawable protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.