Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007959B0000 ABB 2 XT6 Fixed IM Circuit Breaker Installation Kit 3/4 Pole Horizontal 600mm
ABB 1STQ007959B0000 is a System pro E Power horizontal installation kit for an arrangement of two fixed three-pole or four-pole Tmax XT6 moulded case circuit breakers, with the manufacturer’s IM configuration designation, for 600 mm wide switchboards.
£564.89
Why Choose the ABB 2 XT6 Fixed IM Horizontal Installation Kit 1STQ007959B0000?
The ABB 1STQ007959B0000 is a dedicated dual Tmax XT6 circuit breaker installation kit from the ABB System pro E Power range. Identified by the manufacturer as 2 XT6 KIT 3-4P FIXED IM HORIZ.W600, this accessory is designed for an arrangement of two compatible ABB Tmax XT6 moulded case circuit breakers (MCCBs) in three-pole or four-pole fixed-mounted configurations, installed horizontally within a 600 mm wide switchboard arrangement.
Part of the ABB System pro E Power modular low-voltage switchboard system, this kit provides a dedicated mechanical installation solution for integrating two compatible Tmax XT6 circuit breakers into an electrical distribution assembly. It is intended for professional switchboard manufacturers, electrical contractors and panel builders who need a mounting arrangement suited to the specified dual-breaker configuration.
The manufacturer's designation establishes the main installation characteristics: two XT6 circuit breakers, three-pole or four-pole compatibility, fixed mounting, an IM-designated arrangement, horizontal installation and a nominal switchboard width of 600 mm.
The IM designation is retained from the ABB product description. Its precise meaning and the associated operating or interlocking requirements should be confirmed against the relevant ABB technical documentation rather than assumed from the abbreviation alone.
Key Advantages
- Dedicated dual XT6 arrangement: Specified for an installation configuration involving two compatible ABB Tmax XT6 circuit breakers.
- Three-pole and four-pole compatibility: Supports the specified 3-pole and 4-pole fixed-mounted circuit breaker configurations.
- Fixed circuit breaker mounting: Intended for fixed installations rather than plug-in or withdrawable arrangements.
- Horizontal installation: Designed for a horizontally arranged circuit breaker installation within the specified switchboard layout.
- 600 mm nominal switchboard width: Matches the width stated in the ABB product designation.
- System pro E Power integration: Provides a dedicated mechanical installation solution within ABB's modular low-voltage switchboard range.
- IM configuration identification: Helps distinguish this kit from other XT6 mounting arrangements with different operating or installation designations.
- Professional panel construction: Supports the selection of an installation kit matched to the required number, type and mounting arrangement of circuit breakers.
- Suitable for distribution assemblies: Intended for integration into compatible industrial and commercial low-voltage switchboards.
Key Features
- Manufacturer: ABB.
- Product group: System pro E Power.
- ABB order code: 1STQ007959B0000.
- Compatible circuit breaker series: ABB Tmax XT6.
- Specified circuit breaker arrangement: Two XT6 circuit breakers.
- Supported pole configurations: Three-pole and four-pole.
- Mounting configuration: Fixed.
- Manufacturer configuration designation: IM.
- Installation orientation: Horizontal.
- Nominal switchboard width: 600 mm.
- Product function: Mechanical installation of a compatible dual XT6 circuit breaker arrangement.
- Compatible switchboard system: ABB System pro E Power.
- Manufacturer description: 2 XT6 KIT 3-4P FIXED IM HORIZ.W600.
Reliable Dual Circuit Breaker Integration for Low-Voltage Power Distribution
The ABB 1STQ007959B0000 is intended for switchboard designs requiring the installation of two compatible fixed-mounted Tmax XT6 circuit breakers in a horizontal arrangement within a 600 mm wide System pro E Power configuration. The dual-breaker designation is an important distinction from installation kits specified for a single Tmax XT6 device.
The 3-4P designation indicates compatibility with the specified three-pole and four-pole circuit breaker configurations. The FIXED designation identifies a non-withdrawable mounting arrangement. These characteristics should be matched to the exact Tmax XT6 breaker variants selected for the distribution assembly.
The IM designation forms part of the manufacturer's configuration reference. Because the supplied specification does not define this abbreviation, the exact associated components, mechanical functions and operating requirements must be verified using ABB's installation documentation. The designation should not be taken as confirmation that a particular interlocking mechanism, operating drive or control accessory is included.
For installations involving two circuit breakers, the panel designer should also verify the required electrical arrangement, mounting clearances, connections, operating accessories and any necessary coordination or interlocking provisions. These requirements depend on the complete switchboard design and the selected protective devices.
The ABB 1STQ007959B0000 is a mechanical installation accessory. It does not independently provide circuit protection, electrical switching, automatic control or interlocking functionality. The exact kit contents and compatibility with specific Tmax XT6 variants should be confirmed before installation.
Typical Applications
- ABB System pro E Power low-voltage distribution switchboards.
- Industrial electrical power distribution assemblies.
- Commercial building electrical distribution panels.
- Switchboard arrangements requiring two compatible ABB Tmax XT6 circuit breakers.
- Three-pole and four-pole fixed-mounted MCCB installations.
- Horizontal circuit breaker mounting within the specified switchboard arrangement.
- Electrical distribution designs incorporating the ABB-designated IM configuration.
- Main and sub-distribution assemblies using compatible Tmax XT6 protective devices.
- OEM switchboard manufacturing and professional electrical panel construction.
Technical Specifications
| Brand | ABB |
|---|---|
| Product group | System pro E Power |
| ABB order code | 1STQ007959B0000 |
| Manufacturer product description | 2 XT6 KIT 3-4P FIXED IM HORIZ.W600 |
| Product type | Dual circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker range | ABB Tmax XT6 |
| Compatible circuit breaker technology | Moulded case circuit breaker (MCCB) |
| Specified circuit breaker quantity | 2 |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting configuration | Fixed |
| Additional configuration designation | IM |
| Installation orientation | Horizontal |
| Nominal switchboard width | 600 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of two compatible fixed-mounted Tmax XT6 circuit breakers |
| Application | Low-voltage electrical distribution switchboards |
Frequently Asked Questions
What is the ABB 1STQ007959B0000 used for?
The ABB 1STQ007959B0000 is a mechanical installation kit specified for a horizontal arrangement of two compatible fixed-mounted ABB Tmax XT6 circuit breakers within a 600 mm wide System pro E Power switchboard configuration. It supports the specified three-pole and four-pole breaker arrangements and carries the manufacturer's IM designation.
Which circuit breakers are compatible with the ABB 1STQ007959B0000?
The kit is specified for ABB Tmax XT6 moulded case circuit breakers in three-pole or four-pole fixed-mounted configurations. The manufacturer describes an arrangement for two XT6 devices. Exact breaker variants and installation compatibility should be confirmed against ABB technical documentation.
What does the number 2 mean in the ABB product description?
The manufacturer's description begins with 2 XT6, identifying an installation arrangement for two compatible Tmax XT6 circuit breakers. This distinguishes the product from mounting kits designed for a single breaker. It does not mean that two circuit breakers are supplied with the installation kit.
What does IM mean in the ABB XT6 kit description?
IM is a configuration designation included in the manufacturer's product description. Its precise meaning and any associated mechanical or operating requirements are not defined by the supplied specification and should be verified against ABB technical documentation. The designation alone does not confirm the inclusion of an interlocking mechanism or other operating accessory.
Does the ABB 1STQ007959B0000 include two Tmax XT6 circuit breakers or operating accessories?
The ABB 1STQ007959B0000 is identified as a circuit breaker installation kit, not a complete two-breaker assembly. Its supplied contents should be confirmed against ABB documentation. The compatible Tmax XT6 circuit breakers and any required operating, connection or interlocking accessories should be specified separately according to the switchboard design.
Designed for Professional Electrical Panel Builders
The ABB 1STQ007959B0000 provides a dedicated System pro E Power installation solution for a horizontal arrangement of two compatible fixed-mounted Tmax XT6 circuit breakers. With three-pole and four-pole compatibility, the manufacturer's IM configuration designation and a specified 600 mm switchboard width, it supports the mechanical integration of suitable protective devices into professional low-voltage distribution assemblies.
