Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVBX3409 (1STQ007952A0000) is a System pro E Power vertical installation kit designed for 3-pole and 4-pole plug-in Tmax XT3 moulded case circuit-breakers with a motor-operated configuration in 400 mm wide low-voltage switchboard compartments.
£139.96
The ABB PVBX3409 is a dedicated vertical circuit-breaker installation kit designed for integrating ABB Tmax XT3 moulded case circuit-breakers into ABB System pro E Power low-voltage distribution switchboards. Specifically configured for 3-pole and 4-pole plug-in Tmax XT3 circuit-breakers with a motor-operated arrangement, this accessory provides a purpose-designed mechanical mounting solution for professional electrical distribution assemblies.
As part of the ABB System pro E Power range, the PVBX3409 supports electrical panel builders, switchboard manufacturers and industrial engineers in constructing organised modular low-voltage distribution systems. Its dedicated plug-in configuration supports the integration of compatible circuit-breaker connection arrangements, while its motorised operating designation makes it suitable for assemblies incorporating appropriately specified electrically operated circuit-breaker equipment.
Designed for 400 mm wide switchboard compartments, the PVBX3409 accommodates compatible 3-pole or 4-pole ABB Tmax XT3 plug-in circuit-breakers in a vertical installation orientation. Identified by ABB manufacturer order code 1STQ007952A0000, this installation kit provides a coordinated solution for switchboard projects requiring the specified circuit-breaker family, mounting execution, operating arrangement and compartment width.
The ABB PVBX3409 vertical installation kit provides a dedicated mechanical mounting arrangement for incorporating compatible plug-in Tmax XT3 circuit-breakers into System pro E Power distribution switchboards. Its application-specific configuration supports organised equipment positioning and helps panel builders coordinate circuit-breaker installation with the intended enclosure layout.
The kit is designed for 3-pole and 4-pole ABB Tmax XT3 circuit-breakers in plug-in configuration. Plug-in circuit-breakers use dedicated connection components that allow the compatible breaker to be removed from its plug-in base according to the manufacturer's prescribed procedures. This arrangement differs from fixed-mounted circuit-breakers and requires appropriately selected mechanical and electrical connection accessories.
The specified motor-operated arrangement supports installations designed around compatible Tmax XT3 motor operating equipment. Where supported by the selected circuit-breaker and operating accessories, a motor operator enables electrically controlled circuit-breaker operation. The PVBX3409 itself is an installation accessory and does not independently provide motorised switching or electrical control functionality.
The vertical installation orientation and 400 mm compartment width are essential selection criteria. Correctly matching these characteristics helps ensure that the circuit-breaker mounting arrangement corresponds to the intended System pro E Power enclosure configuration. The selected XT3 circuit-breaker, plug-in connection components, motor operator and associated accessories must be checked against ABB's applicable compatibility documentation.
As part of the ABB System pro E Power platform, the PVBX3409 supports modular low-voltage switchboard construction for industrial and commercial applications. The completed assembly must follow ABB's installation instructions and applicable electrical standards, including requirements for conductor routing, electrical clearances, thermal performance and safe equipment access.
The PVBX3409 is a mechanical installation accessory and does not itself provide overload, short-circuit or earth-fault protection. These functions depend on the selected ABB Tmax XT3 circuit-breaker and its protection release. Motorised operation similarly depends on the compatible operating mechanism and associated electrical control equipment.
| Product range | System pro E Power |
|---|---|
| Model / type | PVBX3409 |
| ABB order code | 1STQ007952A0000 |
| Manufacturer description | XT3 KIT 3-4P PLUG IN MOT.VER.INS.W=400MM |
| Product type | Circuit-breaker installation kit |
| Accessory category | Switchboard mounting and installation accessory |
| Compatible circuit-breaker series | ABB Tmax XT3 |
| Circuit-breaker technology | Moulded case circuit-breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit-breaker execution | Plug-in |
| Operating arrangement | Motor-operated (MOT) |
| Installation orientation | Vertical |
| Nominal switchboard compartment width | 400 mm |
| Mounting application | Internal switchboard installation |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage electrical distribution assemblies |
| Product classification | Plug-in motorised circuit-breaker installation accessory |
The ABB PVBX3409 is a vertical installation kit designed for compatible 3-pole and 4-pole ABB Tmax XT3 plug-in circuit-breakers with a motor-operated arrangement in 400 mm wide System pro E Power switchboard compartments.
The PVBX3409 is specifically designated for ABB Tmax XT3 moulded case circuit-breakers in 3-pole or 4-pole plug-in configuration, with the corresponding motor-operated arrangement. The selected circuit-breaker, plug-in components and motor operator must meet ABB's compatibility requirements.
Plug-in identifies a circuit-breaker execution that uses a dedicated plug-in base and electrical connection arrangement. Unlike a fixed-mounted circuit-breaker, a compatible plug-in device can be removed from its connection system according to ABB's operating and maintenance instructions.
MOT identifies the motor-operated configuration associated with the installation kit. The compatible motor operator and any required electrical control accessories must be selected according to ABB's Tmax XT3 and System pro E Power documentation.
Yes. The manufacturer description specifies 3-pole and 4-pole compatibility for appropriately configured ABB Tmax XT3 plug-in circuit-breakers with a motor-operated arrangement.
The PVBX3409 is designed for 400 mm wide ABB System pro E Power switchboard compartments with a vertical circuit-breaker installation orientation.
The PVBX3409 is specifically designated for vertical installation. Horizontal mounting arrangements require an appropriately specified ABB installation kit compatible with the selected circuit-breaker and switchboard configuration.
The PVBX3409 is specifically identified for plug-in Tmax XT3 circuit-breakers. Fixed-mounted and withdrawable executions require installation arrangements designed for their respective mechanical configurations.
Both kits are designed for 3-pole or 4-pole plug-in circuit-breakers with a motor-operated arrangement in vertical System pro E Power installations. The PVBX3409 is specified for Tmax XT3 circuit-breakers in 400 mm wide compartments, whereas the PVCX2409 is designed for Tmax XT2 circuit-breakers in 600 mm wide compartments.
The PVBX3409 is identified as a circuit-breaker installation kit, not a complete circuit-breaker assembly. The manufacturer description does not establish whether the circuit-breaker, plug-in base, motor operator or other connection accessories are included. Exact kit contents should be confirmed against ABB's official documentation, with additional components specified separately where required.
No. The PVBX3409 is a mechanical installation accessory. Electrical protection is provided by the selected ABB Tmax XT3 circuit-breaker and its protection release, while motorised switching depends on a compatible motor operator and its associated control equipment.
The ABB manufacturer order code is 1STQ007952A0000, corresponding to the PVBX3409 Tmax XT3 3/4-pole plug-in motorised vertical installation kit for 400 mm wide System pro E Power switchboards.
ABB System pro E Power installation accessories support professional low-voltage switchboard construction through dedicated mechanical mounting solutions. The PVBX3409 provides a coordinated approach to integrating plug-in, motor-operated Tmax XT3 circuit-breakers into modular electrical distribution assemblies, supporting consistent equipment positioning, organised internal layouts and efficient switchboard construction.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.