Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PVCX2427 (1STQ007934A0000) is a System pro E Power vertical installation kit for three-pole and four-pole plug-in Tmax XT2 circuit breakers with rotary handle drive compatibility, designed for 600 mm wide low-voltage switchboard arrangements.
£139.01
The ABB PVCX2427 (1STQ007934A0000) is a dedicated Tmax XT2 plug-in circuit breaker installation kit from the ABB System pro E Power range. Designed for three-pole and four-pole ABB Tmax XT2 moulded case circuit breakers (MCCBs), this kit supports vertical installation with a compatible rotary handle drive (RHD) operating arrangement in a 600 mm wide switchboard.
As part of the ABB System pro E Power modular low-voltage switchboard system, the PVCX2427 provides a purpose-designed mechanical installation solution for integrating compatible plug-in Tmax XT2 circuit breakers into electrical distribution assemblies. It is intended for professional electrical panel builders, switchboard manufacturers and electrical contractors who require a mounting arrangement specifically suited to plug-in circuit breaker configurations.
Unlike installation kits intended for fixed-mounted circuit breakers, the ABB PVCX2427 is specified for plug-in Tmax XT2 configurations. The manufacturer's designation, XT2 KIT 3-4P PLUG IN RHD VER.INS.W=600MM, identifies the key compatibility requirements: three-pole or four-pole construction, plug-in mounting, rotary handle drive operation, vertical installation and a nominal switchboard width of 600 mm.
The ABB PVCX2427 is intended for switchboard designs where a compatible plug-in Tmax XT2 circuit breaker must be installed vertically within a 600 mm wide System pro E Power arrangement. Its support for three-pole and four-pole configurations allows panel designers to select the appropriate pole arrangement while using an installation kit specified for the plug-in version of the circuit breaker.
A plug-in circuit breaker arrangement differs from a fixed-mounted installation because it uses a compatible plug-in connection system. This can facilitate breaker removal or replacement during maintenance when the installation has been correctly designed and safely isolated. The PVCX2427 should therefore be matched with the appropriate Tmax XT2 plug-in components and accessories specified by ABB. The kit designation alone does not establish that a plug-in base or all associated connection components are included.
The RHD designation identifies compatibility with a rotary handle drive operating arrangement. When the appropriate operating mechanism is installed, a rotary handle provides manual circuit breaker operation. The PVCX2427 itself is a mechanical installation accessory rather than a circuit breaker, protection unit or complete operating mechanism. Circuit protection, switching performance and the correct maintenance procedure depend on the selected Tmax XT2 assembly and its associated equipment.
| Product group | System pro E Power |
|---|---|
| Product designation | PVCX2427 |
| ABB order code | 1STQ007934A0000 |
| Product type | Plug-in circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax XT2 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting configuration | Plug-in |
| Operating arrangement compatibility | Rotary handle drive (RHD) |
| Installation orientation | Vertical |
| Nominal switchboard width | 600 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible plug-in Tmax XT2 circuit breakers |
| Application | Low-voltage electrical distribution switchboards |
| Manufacturer product description | XT2 KIT 3-4P PLUG IN RHD VER.INS.W=600MM |
The ABB PVCX2427 is a mechanical installation kit designed for vertically mounting compatible three-pole or four-pole plug-in ABB Tmax XT2 circuit breakers within 600 mm wide System pro E Power switchboard arrangements, with rotary handle drive compatibility.
The PVCX2427 is specified for ABB Tmax XT2 moulded case circuit breakers in three-pole or four-pole plug-in configurations using a compatible rotary handle drive arrangement. The exact breaker variant, plug-in components and operating accessories should be checked against ABB technical documentation.
The ABB PVCX2427 supports vertical installation in a 600 mm wide ABB System pro E Power switchboard arrangement. It is specifically designated for plug-in Tmax XT2 circuit breaker configurations.
A plug-in installation kit is specified for a circuit breaker arrangement using a compatible plug-in connection system, whereas a fixed installation kit is intended for a fixed-mounted circuit breaker configuration. The ABB PVCX2427 is designated for plug-in Tmax XT2 breakers and should not be treated as interchangeable with a fixed-mounting kit without confirmation from ABB.
The PVCX2427 is identified as a circuit breaker installation kit, not a complete protective device assembly. The supplied contents should be confirmed against ABB documentation. The compatible Tmax XT2 circuit breaker, plug-in connection components and any required rotary handle accessories must be selected according to the switchboard design.
The ABB PVCX2427 (1STQ007934A0000) provides a dedicated System pro E Power installation solution for three-pole and four-pole plug-in Tmax XT2 circuit breakers. With vertical mounting, rotary handle drive compatibility and a specified 600 mm switchboard width, it supports the integration of suitable circuit breaker assemblies into professional low-voltage electrical distribution equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.