Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007933B0000 is a System pro E Power horizontal installation kit for fixed three-pole and four-pole Tmax XT6 circuit breakers with rotary handle drive compatibility, designed for 600 mm wide low-voltage switchboard arrangements.
£285.02
The ABB 1STQ007933B0000 is a dedicated Tmax XT6 fixed circuit breaker installation kit from the ABB System pro E Power range. Designed for three-pole and four-pole ABB Tmax XT6 moulded case circuit breakers (MCCBs), this kit supports horizontal installation with a compatible rotary handle drive (RHD) operating arrangement in a 600 mm wide switchboard.
As part of the ABB System pro E Power modular low-voltage switchboard system, the kit provides a dedicated mechanical installation solution for integrating compatible Tmax XT6 circuit breakers into electrical distribution assemblies. It is intended for professional electrical panel builders, switchboard manufacturers and electrical contractors working with fixed-mounted circuit breaker configurations.
The manufacturer's designation, XT6 KIT 3-4P FIXED RHD HOR.INST. W600, identifies the principal installation requirements: compatibility with Tmax XT6 circuit breakers, three-pole or four-pole construction, fixed mounting, rotary handle drive operation, horizontal installation and a nominal switchboard width of 600 mm. These characteristics make the kit suitable for low-voltage distribution projects requiring a defined and compatible circuit breaker mounting arrangement.
The ABB 1STQ007933B0000 is intended for installations where a fixed-mounted Tmax XT6 circuit breaker must be positioned horizontally within a 600 mm wide System pro E Power switchboard arrangement. Its compatibility with both three-pole and four-pole circuit breakers allows panel designers to select the required pole configuration while using a kit specified for the corresponding mounting arrangement.
The RHD designation refers to rotary handle drive compatibility. A rotary handle operating arrangement allows a compatible circuit breaker to be operated manually using the appropriate mechanical accessories. This can be useful in distribution switchboards where an accessible manual operating arrangement is required. The installation kit provides a mechanical mounting function; electrical protection and switching performance depend on the selected Tmax XT6 circuit breaker and its associated equipment.
When designing a switchboard, the circuit breaker variant, operating mechanism, mounting accessories and installation clearances should be checked against the applicable ABB System pro E Power and Tmax XT6 technical documentation. The manufacturer's description identifies the kit's principal compatibility characteristics but does not, by itself, establish the contents of every supplied component or the suitability of every Tmax XT6 variant.
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ007933B0000 |
| Manufacturer product description | XT6 KIT 3-4P FIXED RHD HOR.INST. W600 |
| Product type | Circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker series | ABB Tmax XT6 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker mounting configuration | Fixed |
| Operating arrangement compatibility | Rotary handle drive (RHD) |
| Installation orientation | Horizontal |
| Nominal switchboard width | 600 mm |
| Compatible switchboard system | ABB System pro E Power |
| Primary function | Mechanical installation of compatible fixed-mounted Tmax XT6 circuit breakers |
| Application | Low-voltage electrical distribution switchboards |
The ABB 1STQ007933B0000 is a mechanical installation kit designed for horizontally mounting compatible fixed, three-pole or four-pole ABB Tmax XT6 circuit breakers within 600 mm wide System pro E Power switchboard arrangements using a compatible rotary handle drive configuration.
The kit is specified for ABB Tmax XT6 moulded case circuit breakers in three-pole or four-pole fixed-mounted configurations with rotary handle drive compatibility. The exact breaker variant and operating accessories should be checked against ABB installation documentation.
The ABB 1STQ007933B0000 is designed for horizontal installation in a 600 mm wide ABB System pro E Power switchboard arrangement.
RHD stands for Rotary Handle Drive. It identifies compatibility with a rotary handle operating arrangement used for manual circuit breaker operation. The correct handle mechanism and related accessories must be selected for the specific Tmax XT6 circuit breaker.
The ABB 1STQ007933B0000 is identified as a circuit breaker installation kit, not a complete protective device assembly. The supplied kit contents should be confirmed against ABB documentation, and the compatible Tmax XT6 circuit breaker and any required rotary handle operating accessories should be specified separately.
The ABB 1STQ007933B0000 provides a dedicated System pro E Power installation solution for fixed three-pole and four-pole Tmax XT6 circuit breakers. With horizontal mounting, rotary handle drive compatibility and a specified 600 mm switchboard width, it supports the integration of suitable protective devices into professional low-voltage electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.