Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007893A0000 ABB PHCT6410 T6 3-4 Pole Withdrawable Horizontal Installation Kit 600 mm System pro E power
ABB PHCT6410 (1STQ007893A0000) is a System pro E power horizontal installation kit designed for compatible 3-pole and 4-pole withdrawable ABB Tmax T6 moulded case circuit breakers in 600 mm-wide low-voltage switchboard modules.
£192.58
Why Choose the ABB PHCT6410 T6 Withdrawable Horizontal Installation Kit?
The ABB PHCT6410, manufacturer order code 1STQ007893A0000, is a specialist T6 withdrawable circuit breaker installation kit designed for compatible ABB Tmax T6 moulded case circuit breakers. Part of the ABB System pro E power range, this switchboard accessory supports the horizontal installation of withdrawable circuit protection equipment within modular low-voltage electrical distribution assemblies.
Specifically identified for 3-pole and 4-pole ABB Tmax T6 circuit breaker configurations, the PHCT6410 features a withdrawable mounting arrangement and a horizontal installation orientation. The kit is intended for compatible System pro E power switchboard modules with a nominal width of 600 mm, making it relevant to professionally designed commercial and industrial electrical distribution systems.
The ABB PHCT6410 T6 installation kit provides a dedicated solution for electrical panel builders, switchboard manufacturers and contractors specifying withdrawable circuit breaker assemblies. By matching the circuit breaker family, pole configuration, mounting execution, installation orientation and switchboard module width, the PHCT6410 supports accurate product selection and coordinated switchboard assembly planning.
Key Advantages
- Genuine ABB System pro E power installation accessory for compatible modular low-voltage switchboards.
- Dedicated installation solution for compatible ABB Tmax T6 moulded case circuit breakers.
- Supports the manufacturer-specified 3-pole and 4-pole circuit breaker configurations.
- Designed specifically for withdrawable circuit breaker installations.
- Provides a dedicated horizontal circuit breaker mounting arrangement.
- Designed for compatible switchboard modules with a nominal width of 600 mm.
- Supports organised integration of circuit protection equipment into modular electrical distribution assemblies.
- Suitable for switchboard designs incorporating compatible withdrawable breaker arrangements for planned maintenance and equipment replacement.
- Helps panel builders select installation accessories according to breaker family, pole configuration and mounting execution.
- Provides a specific ABB manufacturer reference for procurement, quotations and electrical project documentation.
- Intended for integration with appropriate ABB System pro E power structural and mounting components.
- Supports consistent installation planning when used with the relevant ABB technical instructions.
Key Features
- ABB System pro E power modular switchboard installation accessory.
- PHCT6410 manufacturer model designation.
- 1STQ007893A0000 ABB ordering reference.
- ABB Tmax T6 circuit breaker installation application.
- 3-pole and 4-pole circuit breaker configurations.
- Withdrawable circuit breaker execution.
- Horizontal installation orientation.
- 600 mm nominal switchboard module width.
- Dedicated installation arrangement for compatible low-voltage electrical distribution assemblies.
- Designed for integration into suitable ABB System pro E power switchboard structures.
- Intended for use with compatible ABB Tmax T6 withdrawable circuit breakers and associated connection components.
- Suitable for professional modular switchboard construction and installation planning.
ABB Tmax T6 Withdrawable Circuit Breaker Installation for 600 mm Switchboard Modules
Withdrawable moulded case circuit breakers are used in low-voltage electrical distribution systems where a compatible circuit breaker can be removed from its installed position through an appropriate mechanical and electrical connection arrangement. Unlike fixed-mounted circuit breakers, withdrawable configurations require specific breaker executions, connection systems and mounting components that support the manufacturer's prescribed removal and maintenance procedures.
The ABB PHCT6410 is specifically intended for the horizontal installation of compatible 3-pole or 4-pole ABB Tmax T6 withdrawable circuit breakers within 600 mm-wide ABB System pro E power switchboard modules. Its dedicated installation arrangement supports the positioning of suitable T6 devices within modular electrical distribution structures.
The manufacturer's designation WITHDRAW. identifies the withdrawable circuit breaker execution. This is an important distinction when selecting an installation kit, as fixed, plug-in and withdrawable versions of a moulded case circuit breaker can require different mechanical mounting arrangements and electrical connection components. The PHCT6410 should therefore be selected only for compatible withdrawable T6 configurations.
The ABB Tmax T6 circuit breaker family is associated with low-voltage circuit protection and switching applications. When specifying a withdrawable T6 arrangement, the selected circuit breaker must meet the electrical requirements of the installation, including the appropriate rated current, breaking capacity, protection characteristics and terminal configuration. These electrical properties are not established by the PHCT6410 installation kit description.
The 600 mm width designation refers to the nominal switchboard module width associated with the kit's intended installation configuration. It should not be interpreted as the physical width of the circuit breaker or the individual installation kit components. Exact mounting dimensions, installation clearances and connection arrangements should be verified against ABB's product-specific technical drawings.
The PHCT6410 is an installation kit, not a complete ABB Tmax T6 circuit breaker or a fully assembled withdrawable connection system. The manufacturer description does not independently confirm the complete kit contents or establish that all necessary electrical connection components are included. Before procurement or assembly, verify the supplied parts, compatible breaker versions, required supplementary accessories and installation procedures using current ABB documentation.
Typical Applications
- ABB System pro E power modular low-voltage switchboard assemblies.
- Horizontal installation of compatible ABB Tmax T6 withdrawable circuit breakers.
- Switchboard configurations requiring 3-pole or 4-pole withdrawable moulded case circuit breakers.
- Industrial electrical distribution panels and switchgear assemblies.
- Commercial building main electrical distribution boards.
- Low-voltage sub-distribution and power distribution assemblies.
- Manufacturing facilities and industrial plant electrical distribution systems.
- Electrical panel manufacturing and OEM switchboard production.
- Withdrawable circuit breaker applications requiring appropriate maintenance access arrangements.
- Commercial and infrastructure electrical distribution projects.
- Switchboard construction using compatible 600 mm-wide installation modules.
- Low-voltage switchboard refurbishment and compatible circuit breaker installation projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model designation | PHCT6410 |
| ABB order code | 1STQ007893A0000 |
| Manufacturer description | T6 KIT 3-4P WITHDRAW. HOR.INST.W=600MM |
| Product type | Withdrawable circuit breaker installation kit |
| Product category | Low-voltage switchboard mounting accessories |
| Compatible circuit breaker family | ABB Tmax T6 |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker execution | Withdrawable |
| Installation orientation | Horizontal |
| Nominal switchboard module width | 600 mm |
| Compatible switchboard system | ABB System pro E power |
| Intended installation | Low-voltage electrical distribution switchboard |
| Application | Horizontal installation of compatible 3-pole or 4-pole ABB Tmax T6 withdrawable moulded case circuit breakers |
| Circuit breaker breaking capacity | Determined by the separately selected compatible circuit breaker |
| Exact kit contents | Refer to ABB product-specific documentation |
| Installation requirements | Subject to ABB technical instructions and compatible switchboard assembly design |
Frequently Asked Questions
What is the ABB PHCT6410 used for?
The ABB PHCT6410 is an installation kit designed for the horizontal mounting of compatible 3-pole and 4-pole ABB Tmax T6 withdrawable moulded case circuit breakers. It is specified for compatible 600 mm-wide ABB System pro E power switchboard modules.
Which circuit breakers are compatible with the ABB PHCT6410?
The PHCT6410 is specified for compatible ABB Tmax T6 circuit breakers in 3-pole and 4-pole withdrawable configurations. It should not be assumed to support fixed or plug-in breaker versions. Exact breaker compatibility, terminal arrangements and connection requirements should be verified using ABB technical documentation.
What does 3-4P WITHDRAW. HOR.INST. mean in the ABB PHCT6410 description?
3-4P identifies the supported three-pole and four-pole circuit breaker configurations. WITHDRAW. indicates a withdrawable circuit breaker execution, while HOR.INST. specifies horizontal installation. These designations describe the intended breaker arrangement and mounting orientation.
What switchboard width is the ABB PHCT6410 designed for?
The ABB PHCT6410 is intended for compatible 600 mm-wide ABB System pro E power switchboard modules. This is the nominal width of the specified installation arrangement and does not necessarily represent the physical dimensions of the kit or the circuit breaker.
Does the ABB PHCT6410 include the circuit breaker, and what is its order code?
The PHCT6410 is an installation kit and should not be assumed to include the ABB Tmax T6 circuit breaker or every component required for a complete withdrawable assembly. Its ABB manufacturer order code is 1STQ007893A0000. Confirm the exact kit contents and any separately required accessories using ABB's ordering and installation documentation.
Trusted ABB Switchboard Components for Professional Electrical Installations
ABB System pro E power provides a modular approach to professional low-voltage switchboard construction. The PHCT6410 T6 installation kit supports the integration of compatible 3-pole and 4-pole withdrawable moulded case circuit breakers, offering a dedicated horizontal mounting solution for 600 mm-wide switchboard modules in commercial and industrial electrical distribution projects.
