Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007892A0000 ABB PHDT6314 T6 3-Pole Withdrawable RHD Horizontal Installation Kit 800 mm System pro E power
ABB PHDT6314 (1STQ007892A0000) is a System pro E power horizontal installation kit for compatible 3-pole withdrawable ABB Tmax T6 moulded case circuit breakers in the manufacturer-specified RHD configuration, designed for 800 mm-wide low-voltage switchboard modules.
£214.87
Why Choose the ABB PHDT6314 T6 Withdrawable RHD Horizontal Installation Kit?
The ABB PHDT6314, manufacturer order code 1STQ007892A0000, is a specialist T6 withdrawable circuit breaker installation kit designed for compatible ABB Tmax T6 moulded case circuit breakers. Part of the ABB System pro E power range, this switchboard accessory supports the horizontal installation of withdrawable circuit protection equipment within modular low-voltage electrical distribution assemblies.
Specifically identified for 3-pole ABB Tmax T6 circuit breaker configurations, the PHDT6314 features the manufacturer-specified withdrawable + RHD arrangement. Its horizontal installation configuration is intended for compatible System pro E power switchboard modules with a nominal width of 800 mm, providing a dedicated installation solution for appropriately designed commercial and industrial electrical distribution systems.
The ABB PHDT6314 T6 installation kit is intended for professional electrical panel builders, switchboard manufacturers and contractors specifying withdrawable circuit breaker arrangements. By matching the circuit breaker family, pole configuration, mounting execution, RHD designation and module width, the PHDT6314 helps support accurate component selection and consistent assembly planning within compatible ABB System pro E power switchboards.
Key Advantages
- Genuine ABB System pro E power installation accessory for compatible modular low-voltage switchboards.
- Dedicated installation solution for compatible ABB Tmax T6 moulded case circuit breakers.
- Specifically designed for the manufacturer's 3-pole circuit breaker configuration.
- Supports withdrawable circuit breaker installations rather than fixed or plug-in executions.
- Features the manufacturer-designated RHD configuration.
- Provides a dedicated horizontal circuit breaker mounting arrangement.
- Designed for compatible switchboard modules with a nominal width of 800 mm.
- Supports organised integration of circuit protection equipment into modular electrical distribution assemblies.
- Suitable for switchboard designs incorporating compatible withdrawable breaker arrangements for planned maintenance and equipment replacement.
- Helps panel builders identify the appropriate installation accessory according to breaker family, pole configuration and mounting execution.
- Provides a specific ABB manufacturer reference for procurement, quotations and electrical project documentation.
- Intended for integration with suitable ABB System pro E power structural, mounting and connection components.
Key Features
- ABB System pro E power modular switchboard installation accessory.
- PHDT6314 manufacturer model designation.
- 1STQ007892A0000 ABB ordering reference.
- ABB Tmax T6 circuit breaker installation application.
- 3-pole circuit breaker configuration.
- Withdrawable circuit breaker execution.
- RHD configuration identified in the manufacturer description.
- Horizontal installation orientation.
- 800 mm nominal switchboard module width.
- Dedicated installation arrangement for compatible low-voltage electrical distribution assemblies.
- Designed for integration into appropriate ABB System pro E power switchboard structures.
- Intended for use with compatible ABB Tmax T6 withdrawable circuit breakers and associated connection components.
- Supports installation planning for professional modular switchboard construction.
ABB Tmax T6 Withdrawable Circuit Breaker Installation for 800 mm Switchboard Modules
Withdrawable moulded case circuit breakers are used in low-voltage electrical distribution systems where a compatible circuit breaker is designed to be removed from its installed position through an appropriate mechanical and electrical connection arrangement. Unlike fixed-mounted circuit breakers, withdrawable configurations require specific breaker executions, connection systems and mounting components that support the manufacturer's prescribed removal and maintenance procedures.
The ABB PHDT6314 is specifically intended for the horizontal installation of compatible 3-pole ABB Tmax T6 withdrawable circuit breakers within 800 mm-wide ABB System pro E power switchboard modules. Its dedicated installation arrangement supports the positioning of suitable T6 devices within modular electrical distribution structures.
The manufacturer description includes WITH.+RHD, identifying a withdrawable circuit breaker execution together with an additional RHD configuration requirement. The exact mechanical meaning of the RHD designation and its application to particular Tmax T6 breaker variants should be established using the relevant ABB technical drawings and installation instructions.
The ABB Tmax T6 circuit breaker family is associated with low-voltage electrical protection and switching applications. When specifying a withdrawable T6 arrangement, the selected circuit breaker must meet the electrical requirements of the installation, including the appropriate rated current, breaking capacity, protection characteristics and terminal configuration. These electrical properties are not established by the PHDT6314 installation kit description.
The 800 mm width designation refers to the nominal switchboard module width associated with the kit's intended installation configuration. It should not be interpreted as the physical width of the circuit breaker or the individual kit components. Exact mounting dimensions, required clearances and connection arrangements should be verified against ABB's product-specific technical documentation.
The PHDT6314 is an installation kit, not a complete ABB Tmax T6 circuit breaker or a fully assembled withdrawable connection system. The manufacturer description does not independently confirm the complete kit contents or establish that all necessary electrical connection components are included. Before ordering or assembling the installation, verify the supplied parts, compatible breaker versions, required supplementary accessories and installation procedures using current ABB documentation.
Typical Applications
- ABB System pro E power modular low-voltage switchboard assemblies.
- Horizontal installation of compatible ABB Tmax T6 withdrawable circuit breakers.
- Switchboard configurations requiring the specified 3-pole withdrawable RHD arrangement.
- Industrial electrical distribution panels and switchgear assemblies.
- Commercial building main electrical distribution boards.
- Low-voltage sub-distribution and power distribution assemblies.
- Manufacturing facilities and industrial plant electrical distribution systems.
- Electrical panel manufacturing and OEM switchboard production.
- Withdrawable circuit breaker applications requiring suitable maintenance access arrangements.
- Commercial and infrastructure electrical distribution projects.
- Switchboard construction using compatible 800 mm-wide installation modules.
- Low-voltage switchboard refurbishment and compatible circuit breaker installation projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model designation | PHDT6314 |
| ABB order code | 1STQ007892A0000 |
| Manufacturer description | T6 KIT 3P WITH.+RHD HOR.INST. W=800MM |
| Product type | Withdrawable circuit breaker installation kit |
| Product category | Low-voltage switchboard mounting accessories |
| Compatible circuit breaker family | ABB Tmax T6 |
| Supported pole configuration | 3-pole |
| Circuit breaker execution | Withdrawable |
| Specified configuration | RHD |
| Installation orientation | Horizontal |
| Nominal switchboard module width | 800 mm |
| Compatible switchboard system | ABB System pro E power |
| Intended installation | Low-voltage electrical distribution switchboard |
| Application | Horizontal installation of compatible 3-pole ABB Tmax T6 withdrawable circuit breakers in the specified RHD configuration |
| Circuit breaker breaking capacity | Determined by the separately selected compatible circuit breaker |
| Exact kit contents | Refer to ABB product-specific documentation |
| Installation requirements | Subject to ABB technical instructions and compatible switchboard assembly design |
Frequently Asked Questions
What is the ABB PHDT6314 used for?
The ABB PHDT6314 is an installation kit designed for the horizontal mounting of compatible 3-pole ABB Tmax T6 withdrawable moulded case circuit breakers. It is specified for the manufacturer's RHD configuration within compatible 800 mm-wide ABB System pro E power switchboard modules.
Which circuit breakers are compatible with the ABB PHDT6314?
The PHDT6314 is specified for compatible ABB Tmax T6 circuit breakers in a 3-pole withdrawable configuration. Compatibility also depends on the required RHD arrangement. The kit should not be assumed to support 4-pole, fixed or plug-in breaker versions. Exact breaker compatibility and connection requirements should be verified using ABB technical documentation.
What does WITH.+RHD mean in the ABB PHDT6314 description?
WITH. identifies the withdrawable circuit breaker execution, while RHD is an additional manufacturer-specified configuration designation. The precise mechanical application of RHD and its compatibility with particular ABB Tmax T6 breaker variants should be confirmed against ABB's product-specific technical documentation.
What switchboard width is the ABB PHDT6314 designed for?
The ABB PHDT6314 is intended for compatible 800 mm-wide ABB System pro E power switchboard modules. This is the nominal width of the specified installation arrangement and does not necessarily represent the physical dimensions of the kit or the circuit breaker.
Does the ABB PHDT6314 include the circuit breaker, and what is its order code?
The PHDT6314 is an installation kit and should not be assumed to include the ABB Tmax T6 circuit breaker or every component required for a complete withdrawable assembly. Its ABB manufacturer order code is 1STQ007892A0000. Confirm the exact kit contents and any separately required accessories using ABB's ordering and installation documentation.
Trusted ABB Switchboard Components for Professional Electrical Installations
ABB System pro E power provides a modular approach to professional low-voltage switchboard construction. The PHDT6314 T6 installation kit supports the integration of compatible 3-pole withdrawable moulded case circuit breakers, offering a dedicated horizontal mounting solution for the specified RHD configuration in 800 mm-wide switchboard modules.
