Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007876A0000 ABB PHDT5414 T5 3-4 Pole Withdrawable RHD 400A Horizontal Installation Kit 800 mm System pro E power
ABB PHDT5414 (1STQ007876A0000) is a System pro E power horizontal installation kit for compatible 3-pole and 4-pole withdrawable ABB Tmax T5 moulded case circuit breakers in the manufacturer-specified RHD 400 A configuration, designed for 800 mm-wide switchboard modules.
£192.58
Why Choose the ABB PHDT5414 T5 Withdrawable RHD Horizontal Installation Kit?
The ABB PHDT5414, manufacturer order code 1STQ007876A0000, is a specialist T5 withdrawable circuit breaker installation kit designed for compatible ABB Tmax T5 moulded case circuit breakers. Part of the ABB System pro E power range, this dedicated switchboard accessory supports the horizontal installation of circuit protection equipment within modular low-voltage electrical distribution assemblies.
Designed for compatible 3-pole and 4-pole ABB Tmax T5 circuit breaker configurations, the PHDT5414 features the manufacturer-specified withdrawable + RHD arrangement with a 400 A designation. Its horizontal installation configuration is intended for compatible System pro E power switchboard modules with a nominal width of 800 mm.
The ABB PHDT5414 T5 installation kit provides a dedicated mounting solution for professional electrical panel builders, switchboard manufacturers and contractors working with withdrawable circuit breaker assemblies. By matching the breaker family, pole configuration, installation execution, current designation and switchboard module width, this kit supports accurate component selection for commercial and industrial power distribution projects.
Key Advantages
- Genuine ABB System pro E power installation accessory for compatible modular low-voltage switchboards.
- Dedicated mounting solution for compatible ABB Tmax T5 moulded case circuit breakers.
- Supports the manufacturer-specified 3-pole and 4-pole circuit breaker configurations.
- Designed specifically for withdrawable circuit breaker installations.
- Features the manufacturer-designated RHD configuration.
- Identified for the specified 400 A installation arrangement.
- Provides a dedicated horizontal circuit breaker mounting configuration.
- Designed for compatible switchboard modules with a nominal width of 800 mm.
- Supports organised integration of circuit protection equipment into modular electrical distribution assemblies.
- Suitable for switchboard designs incorporating compatible withdrawable breaker arrangements for planned maintenance and equipment replacement.
- Helps panel builders identify the appropriate installation accessory according to breaker family, mounting execution and module width.
- Intended for integration with suitable ABB System pro E power structural and mounting components.
Key Features
- ABB System pro E power modular switchboard installation accessory.
- PHDT5414 manufacturer model designation.
- 1STQ007876A0000 ABB ordering reference.
- ABB Tmax T5 circuit breaker installation application.
- 3-pole and 4-pole circuit breaker compatibility within the specified configuration.
- Withdrawable circuit breaker execution.
- RHD configuration identified in the manufacturer description.
- 400 A manufacturer-designated arrangement.
- Horizontal installation orientation.
- 800 mm nominal switchboard module width.
- Dedicated mounting arrangement for compatible low-voltage electrical distribution assemblies.
- Intended for use with suitable ABB Tmax T5 withdrawable circuit breaker and connection components.
- Designed for integration into compatible ABB System pro E power switchboard structures.
ABB Tmax T5 Withdrawable Circuit Breaker Installation for 800 mm Switchboard Modules
Withdrawable moulded case circuit breakers are used in low-voltage electrical distribution systems where a compatible circuit breaker is designed to be removed through a dedicated mechanical and electrical connection arrangement. Unlike fixed-mounted installations, withdrawable configurations require suitable breaker executions, connection components and mounting accessories that support the manufacturer's prescribed isolation, removal and maintenance procedures.
The ABB PHDT5414 is specifically intended for the horizontal installation of compatible 3-pole or 4-pole Tmax T5 withdrawable circuit breakers within 800 mm-wide ABB System pro E power switchboard modules. Its dedicated installation arrangement supports the positioning of suitable T5 devices within modular electrical distribution structures.
The manufacturer description includes WITH+RHD, identifying the withdrawable execution and an additional RHD configuration requirement. The exact mechanical meaning of the RHD designation, together with its application to specific Tmax T5 breaker variants, should be established from the relevant ABB technical drawings and installation instructions.
The specified 400 A designation is an important part of the PHDT5414 product identification. It indicates the current-related arrangement referenced by ABB for this installation kit. However, this designation should not be interpreted as independent confirmation of the circuit breaker's rated current, protection setting, breaking capacity or the electrical rating of the complete switchboard assembly. These characteristics depend on the selected protective device and the overall electrical design.
The ABB Tmax T5 circuit breaker family is associated with low-voltage circuit protection and switching applications. For a complete withdrawable installation, the selected breaker execution, pole configuration, withdrawable connection system, electrical terminals, mounting components and required clearances must be compatible with the intended System pro E power assembly.
The PHDT5414 is an installation kit, not a complete ABB Tmax T5 circuit breaker or fully assembled withdrawable connection system. The manufacturer description does not independently confirm the complete contents of the kit. Its supplied components, required supplementary accessories, compatible breaker variants and installation requirements should be checked against ABB's current product-specific technical documentation before procurement or assembly.
Typical Applications
- ABB System pro E power modular low-voltage switchboard assemblies.
- Horizontal installation of compatible ABB Tmax T5 withdrawable circuit breakers.
- Switchboard configurations requiring the specified RHD 400 A arrangement.
- Compatible 3-pole and 4-pole moulded case circuit breaker installations.
- Industrial electrical distribution panels and switchgear assemblies.
- Commercial building main and sub-distribution systems.
- Manufacturing facilities and industrial plant electrical distribution.
- Electrical panel manufacturing and OEM switchboard production.
- Withdrawable circuit breaker applications requiring appropriate maintenance access arrangements.
- Commercial and infrastructure electrical distribution projects.
- Switchboard construction requiring compatible 800 mm-wide installation modules.
- Low-voltage switchboard refurbishment and compatible circuit breaker installation projects.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model designation | PHDT5414 |
| ABB order code | 1STQ007876A0000 |
| Manufacturer description | T5 KIT 3-4P WITH+RHD(400A)INS.H. W=800MM |
| Product type | Withdrawable circuit breaker installation kit |
| Product category | Low-voltage switchboard mounting accessories |
| Compatible circuit breaker family | ABB Tmax T5 |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker execution | Withdrawable |
| Specified configuration | RHD |
| Manufacturer current designation | 400 A |
| Installation orientation | Horizontal |
| Nominal switchboard module width | 800 mm |
| Compatible switchboard system | ABB System pro E power |
| Intended installation | Low-voltage electrical distribution switchboard |
| Application | Horizontal installation of compatible 3-pole or 4-pole ABB Tmax T5 withdrawable circuit breakers in the specified RHD 400 A arrangement |
| Exact kit contents | Refer to ABB product-specific documentation |
| Installation requirements | Subject to compatible breaker selection and ABB assembly instructions |
Frequently Asked Questions
What is the ABB PHDT5414 used for?
The ABB PHDT5414 is an installation kit designed for the horizontal mounting of compatible 3-pole and 4-pole ABB Tmax T5 withdrawable moulded case circuit breakers. It is specified for the manufacturer's RHD 400 A arrangement within compatible 800 mm-wide ABB System pro E power switchboard modules.
Which circuit breakers are compatible with the ABB PHDT5414?
The PHDT5414 is specified for compatible ABB Tmax T5 circuit breakers in 3-pole and 4-pole withdrawable configurations. Compatibility also depends on the required RHD designation and the manufacturer's 400 A arrangement. Exact breaker variants and connection requirements should be verified using ABB technical documentation.
What does WITH+RHD (400A) mean in the ABB PHDT5414 description?
WITH identifies the withdrawable circuit breaker execution, while RHD is an additional manufacturer-specified configuration designation. 400 A identifies the current-related arrangement stated in the product description. The exact mechanical application of RHD and the supported breaker configuration should be confirmed against ABB's product-specific technical documentation.
What switchboard width is the ABB PHDT5414 designed for?
The ABB PHDT5414 is intended for compatible 800 mm-wide ABB System pro E power switchboard modules. This is the nominal width of the specified installation arrangement and does not necessarily represent the physical dimensions of the individual kit components.
Does the ABB PHDT5414 include the circuit breaker, and what is its order code?
The PHDT5414 is an installation kit and should not be assumed to include the ABB Tmax T5 circuit breaker or all components required for a complete withdrawable assembly. Its ABB manufacturer order code is 1STQ007876A0000. The exact kit contents and any separately required accessories should be confirmed using ABB's ordering and installation documentation.
Trusted ABB Switchboard Components for Professional Electrical Installations
ABB System pro E power provides a modular approach to professional low-voltage switchboard construction. The PHDT5414 T5 installation kit supports the integration of compatible 3-pole and 4-pole withdrawable circuit breaker arrangements, offering a dedicated horizontal mounting solution for the specified RHD 400 A configuration in 800 mm-wide switchboard modules.
