Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHBT5414 (1STQ007864A0000) is a System pro E power horizontal installation kit for compatible 3-pole and 4-pole withdrawable ABB Tmax T5 moulded case circuit breakers in the manufacturer-specified RHD 400 A configuration, designed for 400 mm-wide switchboard modules.
£154.65
The ABB PHBT5414, manufacturer order code 1STQ007864A0000, is a specialist T5 withdrawable circuit breaker installation kit designed for compatible ABB Tmax T5 moulded case circuit breakers. Part of the ABB System pro E power range, this installation accessory supports the horizontal mounting of compatible circuit protection equipment within modular low-voltage electrical distribution switchboards.
Designed for 3-pole and 4-pole ABB Tmax T5 circuit breaker configurations, the PHBT5414 features the manufacturer-specified withdrawable + RHD arrangement and a 400 A designation. Its horizontal installation configuration is intended for compatible System pro E power switchboard modules with a nominal width of 400 mm.
The ABB PHBT5414 T5 installation kit is suitable for professional electrical panel builders and switchboard manufacturers specifying compatible withdrawable circuit breaker arrangements for industrial and commercial power distribution systems. By matching the circuit breaker family, pole configuration, installation execution and module width, the PHBT5414 helps support consistent component selection within ABB modular switchboard projects.
Withdrawable moulded case circuit breaker arrangements are used in low-voltage distribution systems where a compatible circuit breaker can be removed from its installed position through a dedicated mechanical and electrical connection system. This type of execution differs from a fixed-mounted circuit breaker and requires the correct breaker version, connection components and mounting arrangement.
The ABB PHBT5414 is specifically identified for the horizontal installation of compatible 3-pole or 4-pole Tmax T5 withdrawable circuit breakers within a 400 mm-wide System pro E power module. Its manufacturer designation includes WITH+RHD, identifying the required withdrawable and RHD configuration. The precise mechanical meaning and application of RHD should be confirmed using the relevant ABB technical drawings and installation instructions.
The 400 A designation is an important part of the PHBT5414 manufacturer specification. It identifies the particular installation arrangement for which the kit is intended. However, it should not be interpreted as confirmation of the installed circuit breaker's rated current, trip setting, breaking capacity or the electrical rating of the complete switchboard assembly. Those characteristics must be established from the selected protective device and the overall electrical design.
The ABB Tmax T5 circuit breaker family is associated with low-voltage circuit protection and switching applications. When specifying a withdrawable T5 arrangement, panel builders must verify compatibility between the circuit breaker execution, pole configuration, withdrawable connection system, electrical terminals, installation clearances and the System pro E power switchboard structure.
The PHBT5414 is an installation kit, not a complete ABB Tmax T5 circuit breaker. The manufacturer description does not independently establish the full contents of the kit or confirm that all withdrawable connection components are supplied. The exact scope of supply, compatibility requirements and installation procedure should be checked against ABB's current product-specific documentation before procurement or assembly.
| Product group | System pro E power |
|---|---|
| Model designation | PHBT5414 |
| ABB order code | 1STQ007864A0000 |
| Manufacturer description | T5 KIT 3-4P WITH+RHD(400A)H.INS.W=400MM |
| Product type | Withdrawable circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker family | ABB Tmax T5 |
| Supported pole configurations | 3-pole / 4-pole |
| Circuit breaker execution | Withdrawable |
| Specified configuration | RHD |
| Manufacturer current designation | 400 A |
| Installation orientation | Horizontal |
| Nominal switchboard module width | 400 mm |
| Compatible switchboard system | ABB System pro E power |
| Intended installation | Low-voltage electrical distribution switchboard |
| Application | Horizontal installation of compatible 3-pole or 4-pole ABB Tmax T5 withdrawable circuit breakers in the specified RHD 400 A arrangement |
| Exact kit contents | Refer to ABB product-specific documentation |
The ABB PHBT5414 is a specialist installation kit for the horizontal mounting of compatible 3-pole and 4-pole ABB Tmax T5 withdrawable moulded case circuit breakers. It is designed for the manufacturer-specified RHD 400 A arrangement within compatible 400 mm-wide ABB System pro E power switchboard modules.
The PHBT5414 is specified for compatible ABB Tmax T5 circuit breakers in 3-pole and 4-pole withdrawable configurations. Compatibility also depends on the RHD designation and the specified 400 A arrangement. The exact breaker variants and required connection components must be verified against ABB technical documentation.
WITH identifies the withdrawable circuit breaker execution, while RHD is the manufacturer's specified configuration designation. 400 A identifies the current-related arrangement stated in the product description. The exact mechanical application of RHD and the compatible 400 A breaker configuration should be confirmed using ABB's product-specific documentation.
The ABB PHBT5414 is designed for compatible 400 mm-wide ABB System pro E power switchboard modules. This is the nominal width of the intended installation arrangement and should not be confused with the physical dimensions of the individual kit components.
The PHBT5414 is an installation kit and should not be assumed to include the ABB Tmax T5 circuit breaker or every component required for a complete withdrawable assembly. Its ABB manufacturer order code is 1STQ007864A0000. Confirm the exact kit contents and any separately required accessories using ABB's ordering and installation documentation.
ABB System pro E power provides a modular approach to professional low-voltage switchboard construction. The PHBT5414 T5 installation kit supports the integration of compatible 3-pole and 4-pole withdrawable circuit breaker arrangements, offering a dedicated horizontal mounting solution for the specified RHD 400 A configuration in 400 mm-wide switchboard modules.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.