Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007845A0000 ABB PHBT4406 T4 Fixed RHD Installation Kit 3-4P Horizontal W400 mm System pro E Power
ABB PHBT4406 (1STQ007845A0000) is a System pro E Power installation kit for compatible ABB T4 3-pole and 4-pole fixed moulded-case circuit breakers with rotary handle drive and horizontal installation arrangements in 400 mm wide low-voltage switchboards.
£142.95
Why Choose the ABB PHBT4406 System pro E Power T4 Installation Kit?
The ABB PHBT4406 (1STQ007845A0000) is a dedicated T4 circuit breaker installation kit designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Its authoritative product designation, T4 KIT 3-4P FIXED+RHD HOR.INST. W=400MM, identifies an installation arrangement for compatible ABB T4 moulded-case circuit breakers in 3-pole or 4-pole fixed configurations, with rotary handle drive (RHD), horizontal installation and a nominal switchboard width of 400 mm.
Developed for professional electrical panel builders, switchboard manufacturers and industrial electrical engineers, the PHBT4406 provides a model-specific installation solution for incorporating compatible ABB T4 circuit breakers into System pro E Power electrical distribution assemblies. Its designated configuration helps coordinate breaker mounting, mechanical operating arrangements and enclosure layout.
The ABB PHBT4406 T4 installation kit is particularly relevant where a fixed T4 circuit breaker with a compatible rotary handle operating arrangement must be installed horizontally within a 400 mm nominal width switchboard configuration. Selecting the correctly specified kit helps panel builders coordinate the breaker family, pole configuration, mounting arrangement and enclosure requirements during switchboard construction.
Key Advantages
- Genuine ABB System pro E Power T4 installation kit for modular low-voltage electrical switchboards.
- Designed for compatible ABB T4 moulded-case circuit breakers.
- Supports both 3-pole and 4-pole circuit breaker configurations.
- Specifically designated for fixed circuit breaker installation.
- Designed for a compatible rotary handle drive (RHD) operating arrangement.
- Supports horizontal circuit breaker installation within the designated switchboard structure.
- Suitable for compatible 400 mm wide System pro E Power configurations.
- Helps distinguish fixed rotary handle installations from plug-in and withdrawable breaker arrangements.
- Supports coordinated circuit breaker positioning, operating access and enclosure layout planning.
- Suitable for professional switchboard manufacturing, equipment installation and compatible refurbishment projects.
Key Features
- ABB System pro E Power series switchboard installation accessory.
- Product reference: PHBT4406.
- ABB order code: 1STQ007845A0000.
- Product designation: T4 KIT 3-4P FIXED+RHD HOR.INST. W=400MM.
- Compatible circuit breaker family: ABB T4.
- Supported pole configurations: 3-pole and 4-pole.
- Circuit breaker mounting arrangement: Fixed.
- Operating arrangement: Rotary handle drive (RHD).
- Installation orientation: Horizontal.
- Nominal switchboard width: 400 mm.
- Designed for integration with compatible ABB System pro E Power enclosure structures.
- Dedicated mechanical installation accessory for professional low-voltage electrical distribution assemblies.
T4 Fixed Circuit Breaker Integration with Rotary Handle Drive
The ABB PHBT4406 installation kit supports the mechanical integration of compatible ABB T4 moulded-case circuit breakers into System pro E Power modular low-voltage switchboards. Its specified configuration combines fixed circuit breaker mounting with a rotary handle drive operating arrangement and horizontal installation requirements.
A defining characteristic of the PHBT4406 is its FIXED+RHD designation. FIXED identifies a circuit breaker mounted in its designated fixed position rather than a plug-in or withdrawable arrangement. RHD identifies the intended rotary handle drive operating configuration. These characteristics must be considered together when selecting the breaker and its installation accessories.
The kit is specified for 3-pole and 4-pole ABB T4 circuit breakers. These configurations support different electrical distribution requirements, depending on the circuit design. The appropriate pole arrangement, rated current, breaking capacity and protective characteristics are determined by the selected T4 breaker rather than by the PHBT4406 installation kit.
The rotary handle drive arrangement provides for the use of a compatible mechanical operating interface with the installed circuit breaker. Depending on the selected ABB operating accessories, rotary handle systems may have specific mounting, operating and door interface requirements. The exact mechanism, handle design and any interlocking features must be confirmed against the relevant ABB technical documentation.
The horizontal installation orientation is another important characteristic of the PHBT4406. The kit is intended for the designated horizontal arrangement, and installers should verify the permitted circuit breaker orientation, terminal connection layout, operating access and required clearances against the applicable ABB installation instructions.
The PHBT4406 is designed for a 400 mm nominal switchboard width. This dimension identifies the intended System pro E Power enclosure configuration rather than the physical width of the circuit breaker or the complete installation kit. Other enclosure dimensions, equipment positioning and internal clearances must also be considered when planning the switchboard.
The ABB System pro E Power platform supports modular low-voltage electrical distribution assemblies for industrial, commercial and infrastructure applications. Its enclosure architecture allows compatible structural components, circuit breaker installation accessories, protective panels and other equipment to be combined according to the requirements of the electrical installation.
The PHBT4406 should be selected as part of a coordinated switchboard design. Panel builders should verify the specific ABB T4 breaker variant, pole configuration, fixed mounting requirements, rotary handle compatibility and enclosure arrangement before installation. The product designation identifies the intended installation configuration but does not establish compatibility with every T4 breaker or rotary handle accessory.
As a mechanical circuit breaker installation accessory, the PHBT4406 does not independently provide overcurrent protection, short-circuit protection, electrical switching or isolation. These functions depend on the selected ABB T4 circuit breaker and completed electrical assembly. Although the designation specifies a rotary handle drive arrangement, it does not confirm that the circuit breaker, complete rotary handle mechanism or additional electrical connection accessories are included in the kit.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Installation of compatible ABB T4 moulded-case circuit breakers.
- Fixed 3-pole T4 circuit breaker mounting arrangements.
- Fixed 4-pole T4 circuit breaker mounting arrangements.
- Compatible rotary handle drive circuit breaker installations.
- Horizontal circuit breaker mounting in designated switchboard structures.
- Industrial main and sub-distribution switchboards.
- Commercial building low-voltage electrical distribution assemblies.
- OEM electrical panel building and switchboard manufacturing.
- Refurbishment and replacement of compatible ABB T4 fixed rotary handle installation arrangements.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007845A0000 |
| Product designation | T4 KIT 3-4P FIXED+RHD HOR.INST. W=400MM |
| Product type | Circuit breaker installation kit |
| Product category | Switchboard installation and mounting accessories |
| Compatible circuit breaker family | ABB T4 |
| Compatible pole configurations | 3P / 4P |
| Circuit breaker installation type | Fixed |
| Operating configuration | Rotary handle drive (RHD) |
| Installation orientation | Horizontal |
| Nominal switchboard width | 400 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Mechanical installation of a compatible T4 fixed circuit breaker with rotary handle drive arrangement |
| Application | Modular low-voltage electrical distribution switchboards |
| Breaker electrical ratings | Determined by the separately selected compatible ABB T4 circuit breaker |
| Rotary handle specifications | Determined by the selected compatible operating accessory |
| Mounting requirements | Subject to applicable ABB circuit breaker and switchboard assembly instructions |
| Product classification | Modular switchboard equipment installation accessory |
Frequently Asked Questions
What is the ABB PHBT4406 (1STQ007845A0000) used for?
The ABB PHBT4406 is an installation kit for compatible ABB T4 moulded-case circuit breakers in System pro E Power low-voltage switchboards. It is specified for 3-pole or 4-pole fixed configurations with rotary handle drive, horizontal installation and a nominal switchboard width of 400 mm.
Which ABB circuit breakers are compatible with the PHBT4406?
The PHBT4406 is designated for the ABB T4 circuit breaker family in 3-pole and 4-pole fixed configurations with a compatible rotary handle drive arrangement. Compatibility with a specific T4 breaker variant, operating mechanism and switchboard structure should be confirmed against the applicable ABB technical documentation.
What does FIXED+RHD mean in the ABB PHBT4406 designation?
FIXED identifies a circuit breaker mounting arrangement that does not use a plug-in or withdrawable configuration. RHD identifies a rotary handle drive operating arrangement. Together, these terms specify the intended fixed T4 circuit breaker installation with compatible rotary handle operation.
What is the difference between the ABB PHBT4406 and PHCT4301?
Both products are System pro E Power installation kits for compatible ABB T4 fixed circuit breakers with horizontal installation. The PHBT4406 (1STQ007845A0000) is designated for 3-pole or 4-pole T4 breakers with rotary handle drive in 400 mm wide switchboards, whereas the PHCT4301 (1STQ007844A0000) is designated for a 3-pole fixed T4 breaker in a 600 mm wide switchboard. The PHCT4301 designation does not specifically identify a rotary handle drive arrangement. The kits should not be treated as interchangeable.
Does the ABB PHBT4406 include the T4 circuit breaker and rotary handle?
The ABB PHBT4406 is identified as a T4 installation kit for a fixed rotary handle drive arrangement. Its product designation does not confirm that the circuit breaker, complete rotary handle operating mechanism or additional electrical connection accessories are included. The exact supplied components should be checked against the official ABB kit contents before ordering or installation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power installation accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PHBT4406 T4 installation kit provides a designated mounting solution for compatible 3-pole and 4-pole fixed ABB T4 circuit breakers with rotary handle drive, horizontal installation and 400 mm nominal switchboard width, helping panel builders coordinate equipment positioning, operating arrangements and enclosure compatibility.
