Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHBX4409 is a System pro E Power horizontal installation kit for compatible 3-pole and 4-pole Tmax XT4 plug-in motor-operated circuit breaker arrangements in 400 mm wide low-voltage switchboard sections.
£152.63
The ABB PHBX4409 is a dedicated horizontal installation kit for 3-pole and 4-pole ABB Tmax XT4 plug-in moulded-case circuit breakers with motor-operated arrangements. Part of the ABB System pro E Power modular switchboard accessory range, this kit is specified for installation within a 400 mm-wide low-voltage electrical distribution enclosure section.
Designed to support the integration of compatible Tmax XT4 circuit breakers, the PHBX4409 combines three important installation requirements: plug-in breaker execution, motor-operated configuration and horizontal mounting. This makes it a suitable installation accessory for switchboards incorporating removable circuit breaker arrangements and electrically operated switching equipment.
Identified by manufacturer model PHBX4409 and ABB order code 1STQ007831A0000, the kit provides a defined installation solution for professional electrical panel builders. Its compatibility with both 3-pole and 4-pole XT4 configurations supports the specified range of circuit breaker arrangements within the System pro E Power enclosure platform.
The PHBX4409 is an installation accessory rather than a complete circuit breaker assembly. The compatible breaker, plug-in connection components and motor operating equipment must be selected according to the relevant ABB technical and ordering documentation.
Electrical distribution switchboards incorporating motor-operated circuit breakers require careful coordination between the protective device, its operating mechanism, the connection arrangement and the enclosure structure. Where a plug-in breaker configuration is specified, the installation must also accommodate the appropriate plug-in connection components.
The ABB PHBX4409 addresses the specified mechanical installation arrangement for 3-pole and 4-pole Tmax XT4 plug-in circuit breakers with motor operation. Its horizontal configuration is intended for a compatible 400 mm-wide System pro E Power switchboard section, helping panel builders establish a defined layout for the circuit breaker assembly.
Plug-in circuit breaker arrangements can support equipment replacement and servicing by allowing the breaker to be removed from a compatible connection base using the manufacturer-approved procedure. Motor operating accessories can provide electrically controlled breaker operation, depending on the selected mechanism and associated control wiring. The actual removal procedure, operating functions and electrical characteristics are determined by the complete XT4 assembly rather than the PHBX4409 installation kit alone.
The PHBX4409 does not independently provide overcurrent protection, short-circuit interruption, motor operation or electrical isolation. These functions depend on the selected circuit breaker and associated components. Installers should verify the breaker execution, motor operator compatibility, plug-in connection arrangement, mounting clearances and enclosure configuration against the applicable ABB technical documentation before assembly.
| ABB order code | 1STQ007831A0000 |
|---|---|
| Product group | System pro E Power |
| Product type | Circuit breaker installation kit |
| Accessory category | Switchboard circuit breaker mounting accessories |
| Compatible circuit breaker family | ABB Tmax XT4 |
| Supported pole configurations | 3-pole and 4-pole |
| Circuit breaker execution | Plug-in |
| Operating arrangement | Motor-operated |
| Installation orientation | Horizontal |
| Nominal switchboard section width | 400 mm |
| Compatible enclosure system | ABB System pro E Power |
| Intended application | Low-voltage electrical distribution switchboards |
| Installation requirements | Compatible Tmax XT4 plug-in circuit breaker, associated plug-in components, suitable motor operating equipment and matching System pro E Power enclosure configuration |
The ABB PHBX4409 is a horizontal installation kit for compatible 3-pole and 4-pole ABB Tmax XT4 plug-in circuit breakers with motor-operated arrangements. It is specified for a 400 mm-wide ABB System pro E Power switchboard section.
The PHBX4409 is specified for ABB Tmax XT4 3-pole and 4-pole plug-in moulded-case circuit breakers configured for compatible motor operation. The exact breaker version, plug-in components and motor operating mechanism must be checked against ABB compatibility documentation.
Plug-in refers to a circuit breaker arrangement using a compatible removable connection system, while motor-operated refers to an arrangement incorporating a suitable electrical operating mechanism. The PHBX4409 is designed for the specified installation configuration; it does not itself perform these functions.
The PHBX4409 is specified for a 400 mm-wide ABB System pro E Power switchboard section. This identifies the intended enclosure width and should not be interpreted as the exact physical width of the kit.
The PHBX4409 is identified as an XT4 installation kit. The supplied specification does not establish whether a circuit breaker, plug-in base or motor operator is included. The kit contents and separately required components should therefore be confirmed against ABB ordering documentation.
ABB System pro E Power installation accessories provide defined solutions for integrating circuit breakers into modular low-voltage switchboards. The PHBX4409 supports the specified horizontal installation of compatible 3-pole and 4-pole Tmax XT4 plug-in motor-operated breaker arrangements within 400 mm-wide enclosure sections, helping panel builders develop coordinated electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.