Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHCX3409 (1STQ007814A0000) System Pro E Power installation kit for compatible 3-pole or 4-pole Tmax XT3 plug-in circuit breakers in motor-operated configurations. Designed for horizontal installation in 600 mm nominal-width low-voltage switchboards.
£146.88
The ABB PHCX3409, manufacturer order code 1STQ007814A0000, is a dedicated circuit breaker installation kit from the ABB System Pro E Power modular low-voltage switchboard range. Identified by the manufacturer as XT3 KIT 3-4P PLUG IN MOT.HOR.INS.W=600MM, this accessory is designed for compatible ABB Tmax XT3 3-pole and 4-pole plug-in circuit breaker configurations with motor-operated equipment.
The PHCX3409 is specified for a horizontal installation arrangement in a compatible switchboard structure with a nominal width of 600 mm. Its combination of plug-in configuration, motor-operated equipment compatibility and manufacturer-defined mounting orientation makes it a specialised accessory for professional low-voltage electrical distribution assemblies.
As part of the ABB System Pro E Power product group, the PHCX3409 supports coordinated installation of compatible Tmax XT3 moulded case circuit breakers (MCCBs). It is suitable for electrical panel builders, switchboard manufacturers and industrial electrical contractors who require the correct ABB mounting arrangement for a specified breaker configuration.
The ABB PHCX3409 installation kit is designed for integrating compatible 3-pole and 4-pole Tmax XT3 plug-in circuit breakers into System Pro E Power switchboards. Its manufacturer designation specifies a motor-operated arrangement and horizontal installation, helping distinguish this kit from accessories intended for fixed breakers, different operating arrangements or vertical mounting.
A plug-in circuit breaker configuration uses an appropriate plug-in connection system to interface the breaker with the distribution assembly. This arrangement differs mechanically and electrically from a fixed breaker installation. The compatible plug-in base, connections and any associated accessories must be selected according to the relevant ABB Tmax XT3 documentation.
The MOT designation identifies the intended motor-operated circuit breaker configuration. Motor-operated equipment can be used in appropriately designed electrical systems where remote or electrically initiated breaker operation is required. However, the PHCX3409 product designation does not establish that a motor operator, control module or electrical operating accessories are included in the installation kit.
The specified horizontal mounting orientation is a critical selection characteristic. The PHCX3409 should be used for its designated horizontal arrangement rather than assumed to support vertical installation. Circuit breaker positioning, operating clearances and the space required for motor-operated accessories must be checked against the applicable ABB assembly instructions.
The manufacturer's W=600MM designation refers to a 600 mm nominal switchboard width. This identifies the intended enclosure configuration and should not be confused with the actual physical dimensions of the kit itself. Compatibility depends on the complete System Pro E Power structure, internal mounting arrangement and selected circuit breaker accessories.
The kit is specified for 3-pole and 4-pole Tmax XT3 circuit breakers. It should not automatically be considered suitable for other ABB Tmax frame sizes or alternative breaker mounting versions. The correct product must be selected according to the breaker family, pole configuration, plug-in arrangement, motor-operated equipment and switchboard geometry.
The ABB PHCX3409 is a mechanical installation accessory, not a complete protective device. It does not independently provide an electrical current rating, breaking capacity, overload protection or short-circuit protection. Those characteristics depend on the installed circuit breaker and the completed switchboard assembly.
For professional electrical panel builders, the PHCX3409 provides a manufacturer-specific installation solution for the designated plug-in, motor-operated, horizontal Tmax XT3 configuration, supporting organised and consistent construction of compatible low-voltage distribution switchboards.
The ABB PHCX3409 is an installation kit designed for compatible 3-pole or 4-pole Tmax XT3 plug-in circuit breakers in motor-operated configurations. It is specified for horizontal installation in a 600 mm nominal-width ABB System Pro E Power switchboard arrangement.
The official ABB manufacturer order code is 1STQ007814A0000, corresponding to the PHCX3409 System Pro E Power installation kit.
The PHCX3409 is specifically designated for the ABB Tmax XT3 moulded case circuit breaker series. Compatibility with other Tmax frame sizes should not be assumed without manufacturer confirmation.
Yes. The manufacturer's 3-4P designation specifies the kit for compatible 3-pole and 4-pole Tmax XT3 circuit breaker configurations.
The PHCX3409 is specifically designed for plug-in Tmax XT3 circuit breaker arrangements. It should not be assumed to support fixed or withdrawable breaker versions without checking ABB's installation documentation.
The MOT designation identifies a motor-operated circuit breaker configuration. It indicates the intended installation arrangement but does not confirm that a motor operator is supplied with the kit.
The kit is specified for horizontal installation within a compatible ABB System Pro E Power switchboard structure.
The manufacturer designation specifies a 600 mm nominal switchboard width. This refers to the intended enclosure configuration rather than the independently verified physical width of the installation kit.
The PHCX3409 is identified as an installation kit. Its manufacturer designation does not establish that a Tmax XT3 circuit breaker, motor operator, plug-in base or control accessories are included. The supplied kit contents should be checked against ABB's product documentation.
No independent electrical current rating is specified in the supplied manufacturer designation for the PHCX3409 mechanical installation kit. The applicable electrical ratings depend on the selected Tmax XT3 circuit breaker and the complete switchboard assembly.
ABB System Pro E Power installation accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB PHCX3409 supports the horizontal installation of compatible 3-pole and 4-pole Tmax XT3 plug-in circuit breakers in motor-operated configurations within designated 600 mm wide switchboard arrangements, helping panel builders achieve consistent and organised electrical distribution assemblies.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.