Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007800A0000 ABB PHCX2400 XT2 Withdrawable RHD Installation Kit 3-4P Horizontal W600 mm System pro E Power
ABB PHCX2400 (1STQ007800A0000) is a System pro E Power installation kit for compatible ABB XT2 3-pole and 4-pole withdrawable moulded-case circuit breaker arrangements with rotary handle drive and horizontal installation in 600 mm wide low-voltage switchboards.
£163.38
Why Choose the ABB PHCX2400 System pro E Power XT2 Withdrawable Installation Kit?
The ABB PHCX2400 (1STQ007800A0000) is a dedicated XT2 circuit breaker installation kit designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Its authoritative product designation, XT2 KIT 3-4P WITH. RHD HOR.INST. W=600MM, identifies an installation arrangement for compatible ABB XT2 moulded-case circuit breakers in 3-pole or 4-pole withdrawable configurations, with rotary handle drive (RHD), horizontal installation and a nominal switchboard width of 600 mm.
Designed for professional electrical panel builders, switchboard manufacturers and industrial electrical engineers, the PHCX2400 provides a model-specific installation solution for incorporating compatible ABB XT2 withdrawable circuit breaker arrangements into System pro E Power electrical distribution assemblies. Its designated configuration helps coordinate mechanical mounting, breaker positioning, operating arrangements and enclosure compatibility.
The ABB PHCX2400 XT2 installation kit is particularly relevant where a compatible withdrawable XT2 circuit breaker with a rotary handle operating arrangement must be installed horizontally within a 600 mm wide switchboard configuration. Selecting the appropriate installation kit supports consistent equipment integration, efficient panel layout planning and professional modular switchboard construction.
Key Advantages
- Genuine ABB System pro E Power XT2 installation kit for modular low-voltage electrical switchboards.
- Designed for compatible ABB XT2 moulded-case circuit breakers.
- Supports 3-pole and 4-pole circuit breaker configurations.
- Specified for a withdrawable circuit breaker installation arrangement.
- Designed for a compatible rotary handle drive (RHD) operating configuration.
- Supports horizontal circuit breaker installation within the designated switchboard structure.
- Suitable for compatible 600 mm wide System pro E Power configurations.
- Helps panel builders distinguish withdrawable mounting requirements from fixed and plug-in arrangements.
- Supports coordinated circuit breaker positioning, enclosure planning and equipment integration.
- Suitable for professional switchboard manufacturing, installation and compatible refurbishment projects.
Key Features
- ABB System pro E Power series switchboard installation accessory.
- Product reference: PHCX2400.
- ABB order code: 1STQ007800A0000.
- Product designation: XT2 KIT 3-4P WITH. RHD HOR.INST. W=600MM.
- Compatible circuit breaker family: ABB XT2.
- Supported pole configurations: 3-pole and 4-pole.
- Circuit breaker installation arrangement: Withdrawable.
- Operating arrangement: Rotary handle drive (RHD).
- Installation orientation: Horizontal.
- Nominal switchboard width: 600 mm.
- Designed for integration with compatible ABB System pro E Power enclosure structures.
- Dedicated installation accessory for professional low-voltage electrical distribution assemblies.
Purpose-Designed XT2 Withdrawable Circuit Breaker Integration
The ABB PHCX2400 installation kit supports the integration of compatible ABB XT2 moulded-case circuit breakers into System pro E Power modular low-voltage switchboards. Its specified arrangement combines withdrawable circuit breaker installation requirements with a rotary handle operating configuration and horizontal mounting orientation.
A defining characteristic of the PHCX2400 is its WITH. designation, which identifies a withdrawable installation arrangement. Withdrawable circuit breaker configurations use designated mechanical and electrical interfaces to allow the breaker to be withdrawn in accordance with the manufacturer's procedures. The exact mechanism, connection components and available operating positions depend on the selected compatible ABB XT2 equipment.
The kit is designated for 3-pole and 4-pole ABB XT2 circuit breakers. These configurations support different electrical distribution requirements, depending on the selected circuit design. The appropriate breaker variant, connection arrangement and installation accessories must be verified together before switchboard assembly.
The RHD designation identifies a rotary handle drive operating arrangement. A compatible rotary handle mechanism provides a mechanical interface for operating the selected circuit breaker. The exact handle type, mounting details, interlocking functions and operating characteristics depend on the ABB accessories specified for the completed installation.
The horizontal installation orientation is another defining characteristic of the PHCX2400. The kit is intended for the designated horizontal arrangement, and installers should verify the circuit breaker's permitted mounting orientation, withdrawable mechanism clearances, terminal connections and operating access against the relevant ABB technical documentation.
The PHCX2400 is specified for a 600 mm nominal switchboard width. This dimension identifies the intended System pro E Power enclosure configuration rather than the physical width of the circuit breaker or the complete installation kit. Other enclosure dimensions, internal equipment positions and access requirements must be considered during switchboard design.
The ABB System pro E Power platform supports modular low-voltage electrical distribution assemblies for industrial, commercial and infrastructure applications. Its enclosure architecture allows compatible structural components, circuit breaker installation accessories, protective panels and other elements to be combined according to the requirements of the electrical installation.
Withdrawable circuit breaker arrangements must be installed, operated and maintained according to the manufacturer's instructions and applicable electrical safety requirements. The withdrawable designation does not mean that breaker insertion or removal is permitted while the equipment is energised or carrying load. As an installation accessory, the PHCX2400 does not independently provide electrical protection, switching, isolation or rotary handle operation. The product designation also does not confirm that the circuit breaker, complete withdrawable mechanism or rotary handle is included in the kit.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Installation of compatible ABB XT2 withdrawable moulded-case circuit breakers.
- 3-pole XT2 withdrawable circuit breaker arrangements.
- 4-pole XT2 withdrawable circuit breaker arrangements.
- Compatible rotary handle drive circuit breaker installations.
- Horizontal circuit breaker installation in designated switchboard structures.
- Industrial main and sub-distribution switchboards.
- Commercial building low-voltage electrical distribution assemblies.
- OEM electrical panel building and switchboard manufacturing.
- Refurbishment and replacement of compatible ABB XT2 withdrawable installation arrangements.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007800A0000 |
| Product designation | XT2 KIT 3-4P WITH. RHD HOR.INST. W=600MM |
| Product type | Circuit breaker installation kit |
| Product category | Switchboard installation and mounting accessories |
| Compatible circuit breaker family | ABB XT2 |
| Compatible pole configurations | 3P / 4P |
| Circuit breaker installation arrangement | Withdrawable |
| Operating configuration | Rotary handle drive (RHD) |
| Installation orientation | Horizontal |
| Nominal switchboard width | 600 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Installation of a compatible XT2 withdrawable circuit breaker arrangement |
| Application | Modular low-voltage electrical distribution switchboards |
| Breaker electrical ratings | Determined by the selected compatible ABB XT2 circuit breaker |
| Withdrawable connection components | Subject to the selected compatible ABB XT2 arrangement |
| Rotary handle specifications | Determined by the selected compatible operating accessory |
| Installation requirements | Subject to applicable ABB circuit breaker and switchboard assembly instructions |
| Product classification | Modular switchboard equipment installation accessory |
Frequently Asked Questions
What is the ABB PHCX2400 (1STQ007800A0000) used for?
The ABB PHCX2400 is an installation kit for compatible ABB XT2 moulded-case circuit breakers in System pro E Power low-voltage switchboards. It is specified for 3-pole or 4-pole withdrawable configurations with rotary handle drive, horizontal installation and a nominal switchboard width of 600 mm.
Which ABB circuit breakers are compatible with the PHCX2400?
The PHCX2400 is designated for the ABB XT2 circuit breaker family in 3-pole and 4-pole withdrawable arrangements. Compatibility with a particular XT2 breaker variant, withdrawable connection system and rotary handle accessory should be confirmed against the applicable ABB technical documentation.
What does WITH. RHD mean in the ABB PHCX2400 designation?
WITH. identifies a withdrawable circuit breaker arrangement, while RHD identifies a rotary handle drive operating configuration. Together, these terms describe the intended installation arrangement for compatible ABB XT2 equipment. The exact withdrawable mechanism and rotary handle components must be verified separately.
What is the difference between the ABB PHCX2400 and PHBX2400?
Both products are System pro E Power installation kits for compatible 3-pole or 4-pole withdrawable ABB XT2 circuit breakers with rotary handle drive and horizontal installation. The PHCX2400 (1STQ007800A0000) is specified for a 600 mm nominal switchboard width, whereas the PHBX2400 (1STQ007799A0000) is specified for a 400 mm nominal switchboard width. The correct kit must be selected according to the intended enclosure configuration.
Does the ABB PHCX2400 include the XT2 circuit breaker, withdrawable mechanism and rotary handle?
The ABB PHCX2400 is identified as an XT2 installation kit. Its product designation does not confirm that the circuit breaker, complete withdrawable mechanism, rotary handle or other electrical connection accessories are included. The exact supplied components should be checked against the official ABB kit contents before ordering or installation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power installation accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PHCX2400 XT2 installation kit provides a designated solution for compatible 3-pole and 4-pole withdrawable ABB XT2 circuit breaker arrangements with rotary handle drive, horizontal installation and 600 mm nominal switchboard width, helping panel builders coordinate equipment mounting and enclosure compatibility.
