Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHBX2400 (1STQ007799A0000) is a System pro E Power installation kit for compatible ABB XT2 3-pole and 4-pole withdrawable moulded-case circuit breaker arrangements with rotary handle drive and horizontal installation in 400 mm wide low-voltage switchboards.
£157.48
The ABB PHBX2400 (1STQ007799A0000) is a dedicated XT2 circuit breaker installation kit designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Its authoritative product designation, XT2 KIT 3-4P WITH. RHD HOR.INST. W=400MM, identifies an installation arrangement for compatible ABB XT2 moulded-case circuit breakers in 3-pole or 4-pole configurations, with a withdrawable arrangement, rotary handle drive (RHD), horizontal installation orientation and a nominal switchboard width of 400 mm.
Developed for professional electrical panel builders, switchboard manufacturers and industrial electrical engineers, the PHBX2400 provides a model-specific installation solution for incorporating compatible ABB XT2 withdrawable circuit breaker arrangements into System pro E Power electrical distribution assemblies. Its designated configuration helps coordinate the breaker installation, operating arrangement and enclosure layout.
The ABB PHBX2400 XT2 installation kit is particularly relevant where a compatible withdrawable XT2 circuit breaker with a rotary handle operating arrangement must be installed horizontally in a 400 mm wide switchboard configuration. Selecting the correctly specified installation kit supports consistent equipment integration, modular switchboard construction and appropriate mechanical compatibility.
The ABB PHBX2400 installation kit is designed to support the integration of compatible ABB XT2 moulded-case circuit breakers into System pro E Power low-voltage switchboards. Its specified arrangement combines a withdrawable breaker configuration with a rotary handle operating interface and horizontal installation requirements.
A defining characteristic of the PHBX2400 is the WITH. designation, which identifies a withdrawable installation arrangement. Withdrawable circuit breaker systems use designated mechanical and electrical interfaces to permit breaker withdrawal in accordance with the manufacturer's procedures. The exact withdrawable mechanism, connection components and operating positions depend on the selected compatible ABB XT2 equipment.
The kit is designated for 3-pole and 4-pole XT2 circuit breaker configurations. These options allow the appropriate compatible breaker arrangement to be selected according to the electrical distribution design. The selected breaker, connection components and installation accessories must be verified together before assembly.
The RHD designation identifies a rotary handle drive arrangement. A compatible rotary operating mechanism provides a mechanical interface for operating the selected circuit breaker. The exact handle type, operating characteristics, interlocking functions and mounting requirements depend on the ABB accessories specified for the completed installation.
The horizontal installation orientation is another important characteristic of the PHBX2400. The kit is intended for the designated horizontal arrangement, and installers should confirm the circuit breaker's permitted mounting orientation, withdrawable mechanism clearances, electrical connections and operating access against the relevant ABB technical documentation.
The PHBX2400 is specified for a 400 mm nominal switchboard width. This dimension identifies the intended System pro E Power enclosure configuration rather than the physical width of the circuit breaker or the complete installation kit. Other enclosure dimensions, equipment positions and access requirements must be considered when designing the switchboard.
The ABB System pro E Power platform supports modular low-voltage electrical distribution assemblies for industrial, commercial and infrastructure applications. Compatible enclosure structures, circuit breaker installation accessories, panels and associated components can be combined to meet the requirements of a particular electrical installation.
Withdrawable arrangements must be installed and operated according to the manufacturer's instructions and applicable electrical safety requirements. The withdrawable designation does not establish that insertion or removal is safe while the equipment is energised or carrying load. As an installation accessory, the PHBX2400 does not independently provide electrical protection, switching, isolation or rotary handle operation, and its designation does not confirm that the circuit breaker, withdrawable components or operating handle are included.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007799A0000 |
| Product designation | XT2 KIT 3-4P WITH. RHD HOR.INST. W=400MM |
| Product type | Circuit breaker installation kit |
| Product category | Switchboard installation and mounting accessories |
| Compatible circuit breaker family | ABB XT2 |
| Compatible pole configurations | 3P / 4P |
| Circuit breaker installation arrangement | Withdrawable |
| Operating configuration | Rotary handle drive (RHD) |
| Installation orientation | Horizontal |
| Nominal switchboard width | 400 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Installation of a compatible XT2 withdrawable circuit breaker arrangement |
| Application | Modular low-voltage electrical distribution switchboards |
| Breaker electrical ratings | Determined by the selected compatible ABB XT2 circuit breaker |
| Withdrawable connection components | Subject to the selected compatible ABB XT2 arrangement |
| Rotary handle specifications | Determined by the selected compatible operating accessory |
| Installation requirements | Subject to applicable ABB circuit breaker and switchboard assembly instructions |
| Product classification | Modular switchboard equipment installation accessory |
The ABB PHBX2400 is an installation kit for compatible ABB XT2 moulded-case circuit breakers in System pro E Power low-voltage switchboards. It is specified for 3-pole or 4-pole withdrawable configurations with rotary handle drive, horizontal installation and a nominal switchboard width of 400 mm.
The PHBX2400 is designated for the ABB XT2 circuit breaker family in 3-pole and 4-pole withdrawable arrangements. Compatibility with a particular XT2 breaker variant, withdrawable connection system and rotary handle accessory should be confirmed against the applicable ABB technical documentation.
WITH. identifies a withdrawable circuit breaker arrangement, while RHD identifies a rotary handle drive configuration. Together, these terms describe the intended installation arrangement for compatible ABB XT2 equipment. The exact withdrawable mechanism and rotary handle components must be verified separately.
Both products are System pro E Power installation kits for compatible 3-pole or 4-pole ABB XT2 circuit breakers with horizontal installation in 400 mm wide switchboard configurations. The PHBX2400 (1STQ007799A0000) is designated for a withdrawable arrangement with rotary handle drive, whereas the PHBX2407 (1STQ007781A0000) is designated for a plug-in arrangement. These are different installation configurations and should not be treated as interchangeable.
The ABB PHBX2400 is identified as an XT2 installation kit. Its product designation does not confirm that the circuit breaker, complete withdrawable mechanism, rotary handle or other electrical connection accessories are included. The exact supplied components should be checked against the official ABB kit contents before ordering or installation.
ABB System pro E Power installation accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PHBX2400 XT2 installation kit provides a designated solution for compatible 3-pole and 4-pole withdrawable ABB XT2 circuit breaker arrangements with rotary handle drive, horizontal installation and 400 mm nominal switchboard width, helping panel builders coordinate equipment mounting and enclosure compatibility.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.