Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007788A0000 ABB PHCX2310 XT2 3-Pole Withdrawable Horizontal Installation Kit 600 mm System pro E Power
ABB PHCX2310 is a System pro E Power horizontal installation kit for compatible 3-pole Tmax XT2 withdrawable moulded-case circuit breakers in 600 mm wide low-voltage switchboard sections.
£138.10
Why Choose the ABB PHCX2310 XT2 Withdrawable Circuit Breaker Installation Kit?
The ABB PHCX2310 is a dedicated horizontal installation kit for 3-pole ABB Tmax XT2 withdrawable moulded-case circuit breakers, designed for the ABB System pro E Power modular low-voltage switchboard enclosure range. Specified for a 600 mm-wide switchboard section, this accessory supports the mechanical integration of compatible withdrawable XT2 circuit breaker assemblies into electrical distribution cabinets.
Withdrawable circuit breaker arrangements are used in electrical distribution systems where the ability to withdraw a breaker from its connected position is required for operational flexibility and maintenance. The PHCX2310 provides a manufacturer-specific installation solution for a 3-pole Tmax XT2 withdrawable circuit breaker in a horizontal mounting configuration, helping panel builders achieve coordinated integration within the System pro E Power platform.
Identified by ABB model PHCX2310 and manufacturer order code 1STQ007788A0000, this installation kit is intended for professional switchboard manufacturers, electrical contractors and maintenance engineers. Its defined configuration combines XT2 compatibility, 3-pole execution, withdrawable installation, horizontal orientation and a 600 mm enclosure width.
Key Advantages
- Dedicated Tmax XT2 compatibility: Designed for compatible ABB Tmax XT2 moulded-case circuit breaker installations.
- 3-pole configuration: Supports the specified three-pole XT2 breaker arrangement.
- Withdrawable execution: Intended for circuit breaker installations using the appropriate withdrawable components.
- Horizontal mounting: Designed for horizontal circuit breaker positioning within the switchboard.
- 600 mm enclosure width: Matched to the specified System pro E Power switchboard section.
- Modular system integration: Supports coordinated installation using ABB enclosure components.
- Maintenance-oriented configuration: Accommodates withdrawable breaker arrangements designed for equipment removal and servicing.
- Consistent switchboard layout: Helps panel builders establish a defined circuit breaker mounting arrangement.
- Manufacturer identification: ABB model PHCX2310 supports accurate product selection.
- Procurement traceability: ABB order code 1STQ007788A0000 enables precise specification and replacement.
Key Features
- ABB System pro E Power switchboard installation accessory.
- PHCX2310 manufacturer model designation.
- 1STQ007788A0000 ABB order code.
- Designed for the ABB Tmax XT2 circuit breaker family.
- Specified for 3-pole circuit breakers.
- Compatible with the designated withdrawable breaker execution.
- Designed for horizontal installation.
- Specified for a 600 mm-wide switchboard section.
- Supports integration into modular low-voltage distribution assemblies.
- Intended for use with appropriately selected XT2 withdrawable connection and mounting components.
- Suitable for professional switchboard manufacturing and assembly.
- Mechanical installation accessory rather than a complete circuit breaker.
Reliable Tmax XT2 Withdrawable Integration for Modular Switchboards
Low-voltage electrical distribution switchboards require correctly selected mounting arrangements to accommodate circuit breakers, their electrical connections and associated operating mechanisms. Withdrawable circuit breaker configurations introduce additional mechanical requirements because the breaker must interface with a compatible withdrawal and connection arrangement.
The ABB PHCX2310 is specified for horizontal installation of a 3-pole Tmax XT2 withdrawable circuit breaker within a compatible 600 mm-wide System pro E Power switchboard section. This defined configuration helps electrical panel builders select the appropriate installation accessory for the intended breaker and enclosure combination.
Withdrawable circuit breaker arrangements can facilitate equipment inspection, maintenance and replacement when used with the correct associated components. However, the available withdrawal positions, isolation characteristics and operating procedures depend on the complete breaker assembly and its manufacturer-approved accessories, rather than the installation kit alone.
The PHCX2310 is a mechanical installation accessory and does not independently provide overcurrent protection, short-circuit interruption or electrical isolation. These functions depend on the selected Tmax XT2 breaker and complete withdrawable arrangement. Mounting, electrical clearances, connection interfaces and enclosure compatibility should be verified against the applicable ABB System pro E Power and Tmax XT2 installation documentation.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Horizontal installation of ABB Tmax XT2 circuit breakers.
- 3-pole XT2 withdrawable breaker configurations.
- 600 mm-wide electrical distribution board sections.
- Industrial main distribution boards.
- Commercial building electrical distribution assemblies.
- Modular switchgear and controlgear installations.
- Electrical panels requiring compatible withdrawable breaker arrangements.
- OEM switchboard manufacturing and electrical panel building.
- Refurbishment of compatible ABB Tmax XT2 mounting arrangements.
Technical Specifications
| ABB order code | 1STQ007788A0000 |
|---|---|
| Product group | System pro E Power |
| Product type | Circuit breaker installation kit |
| Accessory category | Switchboard circuit breaker mounting accessories |
| Compatible circuit breaker family | ABB Tmax XT2 |
| Supported pole configuration | 3-pole |
| Circuit breaker execution | Withdrawable |
| Installation orientation | Horizontal |
| Nominal switchboard section width | 600 mm |
| Compatible enclosure system | ABB System pro E Power |
| Intended application | Low-voltage electrical distribution switchboards |
| Installation requirement | Compatible XT2 withdrawable assembly and System pro E Power enclosure configuration |
Frequently Asked Questions
What is the ABB PHCX2310 used for?
The ABB PHCX2310 is an installation kit designed for a compatible 3-pole ABB Tmax XT2 withdrawable circuit breaker. It supports horizontal installation within a 600 mm-wide ABB System pro E Power switchboard section.
Which circuit breaker is compatible with the ABB PHCX2310?
The PHCX2310 is specified for the ABB Tmax XT2 3-pole withdrawable circuit breaker configuration. The exact breaker version and required withdrawal accessories should be checked against the relevant ABB technical documentation.
What does withdrawable mean in the PHCX2310 specification?
Withdrawable describes a circuit breaker execution designed to be moved or removed using a compatible withdrawal arrangement. The available operating positions and isolation features depend on the complete ABB breaker and accessory configuration.
What switchboard width is the ABB PHCX2310 designed for?
The PHCX2310 is specified for a 600 mm-wide ABB System pro E Power switchboard section. This identifies the intended enclosure width and should not be interpreted as the exact physical width of the installation kit.
Does the ABB PHCX2310 include a Tmax XT2 circuit breaker?
The PHCX2310 is identified as an XT2 installation kit, not a complete circuit breaker. The inclusion of a breaker or withdrawal accessories is not established by the supplied specification, so the required components and kit contents should be confirmed against ABB ordering documentation.
Designed for Professional Switchboard Builders and Electrical Engineers
ABB System pro E Power installation accessories support coordinated circuit breaker integration within modular low-voltage switchboards. The PHCX2310 provides a defined horizontal installation solution for compatible 3-pole Tmax XT2 withdrawable circuit breakers in 600 mm-wide enclosure sections, helping panel builders achieve consistent and maintainable electrical distribution assemblies.
