Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007781A0000 ABB PHBX2407 XT2 Plug-In Installation Kit 3-4P Horizontal W400 mm System pro E Power
ABB PHBX2407 (1STQ007781A0000) is a System pro E Power installation kit for compatible ABB XT2 3-pole and 4-pole plug-in moulded-case circuit breakers with horizontal installation arrangements in 400 mm wide low-voltage switchboards.
£138.10
Why Choose the ABB PHBX2407 System pro E Power XT2 Plug-In Installation Kit?
The ABB PHBX2407 (1STQ007781A0000) is a dedicated XT2 plug-in circuit breaker installation kit designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Its official product designation, XT2 KIT 3-4P PLUG IN HOR.INST.W=400MM, identifies an installation arrangement for compatible ABB XT2 moulded-case circuit breakers in 3-pole or 4-pole plug-in configurations, with horizontal installation in a nominal 400 mm wide switchboard.
Developed for electrical panel builders, switchboard manufacturers and industrial electrical engineers, the PHBX2407 provides a model-specific installation solution for incorporating compatible ABB XT2 plug-in circuit breaker arrangements into System pro E Power electrical distribution assemblies. Its designated configuration helps coordinate breaker positioning, mechanical installation and compatibility with the selected switchboard structure.
The ABB PHBX2407 XT2 installation kit is particularly relevant where a compatible plug-in XT2 circuit breaker must be installed horizontally within a 400 mm nominal width enclosure configuration. By selecting an installation kit designed for the required breaker family, pole arrangement and mounting type, panel builders can support consistent switchboard assembly and appropriate equipment integration.
Key Advantages
- Genuine ABB System pro E Power XT2 installation kit for modular low-voltage electrical switchboards.
- Designed for compatible ABB XT2 moulded-case circuit breakers.
- Supports 3-pole and 4-pole circuit breaker configurations.
- Specifically designated for plug-in circuit breaker installations.
- Supports horizontal mounting within compatible switchboard arrangements.
- Designed for 400 mm nominal width System pro E Power configurations.
- Helps panel builders distinguish plug-in mounting requirements from fixed breaker arrangements.
- Supports coordinated equipment positioning within modular electrical distribution assemblies.
- Designed for integration with the ABB System pro E Power enclosure platform.
- Suitable for professional switchboard construction, equipment integration and compatible refurbishment projects.
Key Features
- ABB System pro E Power series switchboard installation accessory.
- Product reference: PHBX2407.
- ABB order code: 1STQ007781A0000.
- Product designation: XT2 KIT 3-4P PLUG IN HOR.INST.W=400MM.
- Compatible circuit breaker family: ABB XT2.
- Supported pole configurations: 3-pole and 4-pole.
- Circuit breaker installation type: Plug-in.
- Installation orientation: Horizontal.
- Nominal switchboard width: 400 mm.
- Designed for use with compatible XT2 plug-in mounting arrangements.
- Supports integration with designated ABB System pro E Power enclosure structures.
- Dedicated mechanical installation accessory for professional low-voltage electrical distribution assemblies.
Purpose-Designed XT2 Plug-In Circuit Breaker Integration
The ABB PHBX2407 installation kit supports the integration of compatible ABB XT2 moulded-case circuit breakers into System pro E Power modular low-voltage switchboards. Correctly selected installation accessories help ensure that the intended circuit breaker configuration can be accommodated within the designated enclosure arrangement.
A defining characteristic of the PHBX2407 is its plug-in installation designation. Unlike a fixed circuit breaker arrangement, a plug-in configuration uses compatible plug-in connection components that allow the breaker to be connected and disconnected through the manufacturer's designated interface. The exact mounting base, connection components and removal procedure depend on the selected ABB XT2 configuration.
The kit is specified for 3-pole and 4-pole ABB XT2 circuit breakers. This makes it relevant to compatible three-pole and four-pole electrical distribution arrangements. The appropriate breaker configuration must be selected according to the circuit design, electrical requirements and applicable installation standards.
The horizontal installation orientation is an important part of the PHBX2407 designation. The kit is intended for a designated horizontal mounting arrangement, and installers should verify the permitted breaker orientation, electrical connection layout, access requirements and clearances using the applicable ABB technical documentation.
The PHBX2407 is designed for a 400 mm nominal switchboard width. This dimension refers to the intended System pro E Power enclosure configuration rather than the physical width of the circuit breaker or installation kit. Other enclosure dimensions and internal equipment arrangements must be considered when planning the complete switchboard.
Plug-in circuit breaker arrangements can offer practical advantages in installations where the selected equipment configuration requires a removable breaker interface. However, the plug-in designation does not mean that the circuit breaker can be safely inserted or removed under load. All isolation, removal and maintenance procedures must follow the manufacturer's instructions and applicable electrical safety requirements.
The ABB System pro E Power platform supports modular low-voltage electrical distribution assemblies for industrial, commercial and infrastructure applications. Its compatible structural components and equipment installation accessories allow panel builders to configure switchboards according to the required electrical equipment layout.
As a circuit breaker installation accessory, the PHBX2407 does not independently provide circuit protection, electrical switching or isolation. Those functions depend on the selected ABB XT2 circuit breaker and the completed electrical assembly. The product designation does not confirm that the circuit breaker, plug-in base or additional electrical accessories are included in the kit.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Installation of compatible ABB XT2 plug-in moulded-case circuit breakers.
- 3-pole XT2 plug-in circuit breaker mounting arrangements.
- 4-pole XT2 plug-in circuit breaker mounting arrangements.
- Horizontal circuit breaker installation in compatible switchboard structures.
- Electrical distribution assemblies using designated plug-in breaker configurations.
- Industrial main and sub-distribution switchboards.
- Commercial building low-voltage distribution assemblies.
- OEM electrical panel building and switchboard manufacturing.
- Refurbishment and replacement of compatible ABB XT2 plug-in installation arrangements.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007781A0000 |
| Product designation | XT2 KIT 3-4P PLUG IN HOR.INST.W=400MM |
| Product type | Circuit breaker installation kit |
| Product category | Switchboard installation and mounting accessories |
| Compatible circuit breaker family | ABB XT2 |
| Compatible pole configurations | 3P / 4P |
| Circuit breaker installation type | Plug-in |
| Installation orientation | Horizontal |
| Nominal switchboard width | 400 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Installation of a compatible XT2 plug-in circuit breaker arrangement |
| Application | Modular low-voltage electrical distribution switchboards |
| Breaker electrical ratings | Determined by the selected compatible ABB XT2 circuit breaker |
| Plug-in connection arrangement | Subject to the selected compatible XT2 plug-in components |
| Mounting requirements | Subject to the applicable ABB circuit breaker and switchboard assembly instructions |
| Product classification | Modular switchboard equipment installation accessory |
Frequently Asked Questions
What is the ABB PHBX2407 (1STQ007781A0000) used for?
The ABB PHBX2407 is an installation kit for compatible ABB XT2 plug-in moulded-case circuit breakers in System pro E Power low-voltage switchboards. It is specified for 3-pole or 4-pole plug-in configurations, horizontal installation and a nominal switchboard width of 400 mm.
Which circuit breakers are compatible with the ABB PHBX2407?
The PHBX2407 is designated for the ABB XT2 circuit breaker family in 3-pole and 4-pole plug-in configurations. Compatibility with a particular XT2 breaker version, plug-in connection arrangement and switchboard structure should be confirmed against the applicable ABB technical documentation.
What does PLUG IN mean in the ABB PHBX2407 designation?
PLUG IN identifies a circuit breaker mounting configuration using a compatible plug-in connection interface rather than a conventional fixed arrangement. The exact plug-in components and connection method depend on the selected ABB XT2 equipment. The designation does not imply that insertion or removal is permitted while the equipment is energised.
What is the difference between the ABB PHBX2407 and PHCX2405?
Both products are System pro E Power installation kits for compatible 3-pole or 4-pole ABB XT2 circuit breakers in horizontal arrangements. The PHBX2407 (1STQ007781A0000) is specified for a plug-in configuration in a 400 mm wide switchboard, while the PHCX2405 (1STQ007780A0000) is specified for a fixed rotary handle drive configuration in a 600 mm wide switchboard. The kits are intended for different installation arrangements and should not be treated as interchangeable.
Does the ABB PHBX2407 include the XT2 circuit breaker and plug-in base?
The ABB PHBX2407 is identified as an XT2 installation kit. Its product designation does not confirm that the circuit breaker, plug-in base or other electrical connection accessories are included. The exact supplied components should be checked against the official ABB kit contents before ordering or installation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power installation accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PHBX2407 XT2 installation kit provides a designated solution for compatible 3-pole and 4-pole plug-in ABB XT2 circuit breakers requiring horizontal installation within a 400 mm nominal width switchboard configuration, helping panel builders coordinate equipment mounting and enclosure compatibility.
