Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PHCX1404 (1STQ007760A0000) is a System pro E Power installation kit for compatible ABB XT1 3-pole and 4-pole fixed circuit breakers with motor-operated horizontal installation arrangements in 600 mm wide low-voltage switchboard configurations.
£127.35
The ABB PHCX1404 (1STQ007760A0000) is a dedicated XT1 circuit breaker installation kit designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Its manufacturer designation, XT1 KIT 3-4P FIXED MOT.HOR.INST.W=600MM, identifies an installation arrangement for compatible ABB XT1 circuit breakers in 3-pole or 4-pole fixed configurations, with a motor-operated horizontal installation arrangement and a nominal switchboard width of 600 mm.
Developed for professional electrical panel builders, switchboard manufacturers and industrial electrical engineers, the PHCX1404 provides a model-specific installation solution for incorporating compatible ABB XT1 moulded-case circuit breakers into System pro E Power assemblies. Its designated mounting configuration helps simplify component selection and supports the planning of circuit breaker positions within modular electrical distribution switchboards.
The ABB PHCX1404 is particularly relevant where a fixed ABB XT1 circuit breaker with a compatible motor-operated arrangement must be installed horizontally in a 600 mm wide switchboard configuration. By selecting the appropriate installation kit, panel builders can coordinate the breaker mounting arrangement with the enclosure structure, equipment layout and applicable ABB assembly requirements.
The ABB PHCX1404 installation kit is intended to support the integration of compatible ABB XT1 moulded-case circuit breakers into System pro E Power low-voltage switchboards. Correct circuit breaker mounting is an important part of switchboard construction because the selected equipment must be positioned in accordance with the manufacturer's mechanical, electrical and operational requirements.
The PHCX1404 is specifically identified for 3-pole and 4-pole fixed XT1 circuit breaker arrangements. A fixed installation differs from a withdrawable or plug-in arrangement because the breaker is installed in its designated fixed mounting configuration rather than being selected for routine withdrawal through a separate disconnecting mechanism.
The manufacturer designation also specifies MOT.HOR.INST., indicating a motor-operated horizontal installation arrangement. Motor-operated circuit breaker configurations can be used where the selected electrical distribution design requires an appropriate motor operating accessory. The PHCX1404 is an installation kit and should not be assumed to include the circuit breaker or motor operator unless these items are explicitly confirmed in the supplied product contents.
Horizontal mounting requirements must be considered alongside the circuit breaker's permitted installation orientation, connection arrangement and operating clearances. The ABB PHCX1404 is intended for the designated horizontal configuration, but final compatibility should be verified against the specific XT1 breaker version, motor operating accessory and relevant ABB installation documentation.
The kit is specified for a 600 mm nominal switchboard width. This dimension identifies the intended System pro E Power enclosure configuration rather than the physical width of the circuit breaker or the overall dimensions of the installation kit. Other enclosure dimensions and component arrangements must be checked as part of the complete switchboard design.
The ABB System pro E Power platform supports modular low-voltage electrical distribution assemblies used in industrial, commercial and infrastructure applications. Its enclosure system allows compatible circuit breaker installation accessories, structural components, panels and other switchboard elements to be combined according to the required equipment layout.
As a mechanical installation accessory, the PHCX1404 does not independently provide circuit protection, electrical isolation, remote operation or switching functionality. These capabilities depend on the separately selected ABB XT1 circuit breaker, its accessories, electrical connections and the completed switchboard assembly.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007760A0000 |
| Product designation | XT1 KIT 3-4P FIXED MOT.HOR.INST.W=600MM |
| Product type | Circuit breaker installation kit |
| Product category | Switchboard installation and mounting accessories |
| Compatible circuit breaker family | ABB XT1 |
| Compatible pole configurations | 3P / 4P |
| Breaker installation type | Fixed |
| Motor-operated arrangement | Specified for compatible motor-operated installations |
| Installation orientation | Horizontal |
| Nominal switchboard width | 600 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Mechanical installation of a compatible XT1 circuit breaker arrangement |
| Application | Modular low-voltage electrical distribution switchboards |
| Breaker electrical ratings | Determined by the separately selected compatible ABB XT1 circuit breaker |
| Motor operator specifications | Determined by the selected compatible motor operating accessory |
| Installation requirements | Subject to the applicable ABB breaker and switchboard assembly instructions |
| Product classification | Modular switchboard equipment installation accessory |
The ABB PHCX1404 is an installation kit designed for mounting compatible ABB XT1 moulded-case circuit breakers in System pro E Power low-voltage switchboards. It is specified for fixed, motor-operated horizontal installation arrangements in compatible 600 mm wide switchboard configurations.
The PHCX1404 is designated for the ABB XT1 circuit breaker family in 3-pole or 4-pole fixed configurations. Compatibility with a particular XT1 breaker variant and motor operating accessory should be confirmed using the applicable ABB technical documentation.
The designation identifies a fixed circuit breaker mounting configuration intended for a compatible motor-operated horizontal installation arrangement. The kit provides the specified installation solution; it does not independently perform motor operation or circuit protection.
The ABB PHCX1404 is specified for a 600 mm nominal switchboard width within the compatible ABB System pro E Power enclosure system. This dimension refers to the intended enclosure configuration, not the physical width of the circuit breaker or installation kit.
The PHCX1404 is identified as an XT1 installation kit. The product designation does not confirm that a circuit breaker, motor operator or other electrical accessories are included. These components should be selected separately unless the supplier's confirmed kit contents explicitly state otherwise.
ABB System pro E Power installation accessories support the professional assembly of modular low-voltage electrical distribution switchboards. The ABB PHCX1404 XT1 installation kit is designed for compatible 3-pole and 4-pole fixed, motor-operated horizontal circuit breaker arrangements within 600 mm wide System pro E Power switchboard configurations, helping panel builders select the appropriate equipment installation solution.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.