Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007743A0000 ABB PUCM2000 Galvanised Cable Compartment Upright 2000 mm System pro E Power
ABB PUCM2000 is a 2000 mm high galvanised sheet-steel cable compartment upright designed for compatible System pro E Power modular low-voltage electrical distribution switchboards.
£66.82
Why Choose the ABB PUCM2000 Galvanised Cable Compartment Upright?
The ABB PUCM2000 is a galvanised sheet-steel cable compartment upright designed for the ABB System pro E Power modular low-voltage switchboard enclosure range. With a nominal height of 2000 mm, this structural accessory supports the construction of dedicated cable compartment arrangements within compatible electrical distribution cabinets.
Cable compartments play an important role in professional switchboard construction by providing designated areas for incoming and outgoing conductors, cable routing and associated connection arrangements. The PUCM2000 provides a vertical structural element for compatible cable compartment assemblies, helping electrical panel builders establish an organised and consistent internal enclosure layout.
Manufactured from galvanised sheet steel, the PUCM2000 combines durable construction with the modular compatibility of the ABB System pro E Power platform. Identified by manufacturer model PUCM2000 and ABB order code 1STQ007743A0000, this component is intended for use with appropriate matching enclosure structures and cable compartment accessories.
Key Advantages
- Purpose-designed cable compartment upright: Supports internal cable compartment construction in compatible ABB switchboards.
- 2000 mm nominal height: Designed for matching full-height vertical compartment arrangements.
- Galvanised sheet-steel construction: Provides a durable structural material for internal electrical enclosure applications.
- ABB System pro E Power compatibility: Integrates into the manufacturer's modular low-voltage switchboard platform.
- Organised cable management: Supports the construction of dedicated cable routing areas.
- Vertical structural integration: Provides an upright component for compatible cable compartment assemblies.
- Consistent switchboard construction: Helps panel builders establish coordinated internal compartment layouts.
- Manufacturer-specific identification: ABB model PUCM2000 supports accurate product selection.
- Procurement traceability: Dedicated ABB order code 1STQ007743A0000 simplifies specification and replacement.
- Installation versatility: Suitable for new assemblies and refurbishment of compatible System pro E Power switchboards.
Key Features
- ABB System pro E Power enclosure accessory.
- PUCM2000 manufacturer model designation.
- 1STQ007743A0000 ABB ordering code.
- Galvanised sheet-steel construction.
- 2000 mm nominal height.
- Vertical upright configuration.
- Designed for cable compartment applications.
- Supports modular internal switchboard construction.
- Suitable for integration with compatible cable compartment structural accessories.
- Intended for low-voltage electrical distribution assemblies.
- Supports organised internal cable routing arrangements.
- Designed for installation within compatible ABB System pro E Power enclosures.
- Individual structural component rather than a complete cable compartment assembly.
Reliable Cable Compartment Support for Modular Electrical Switchboards
Low-voltage electrical distribution switchboards frequently require dedicated cable compartments to accommodate incoming and outgoing conductors, cable terminations and internal routing arrangements. These compartments must be incorporated into the enclosure using structural components selected for the intended switchboard configuration.
The ABB PUCM2000 galvanised cable compartment upright provides a vertical structural element for compatible System pro E Power assemblies. Its 2000 mm nominal height is intended for matching enclosure arrangements, while its galvanised sheet-steel construction provides a durable solution for internal switchboard structures.
When combined with the appropriate cable compartment accessories, the upright helps establish an organised internal arrangement for cable routing and switchboard assembly. Correct positioning and mechanical integration depend on the selected enclosure configuration, adjacent structural components and applicable ABB assembly instructions.
The PUCM2000 is a mechanical enclosure accessory rather than an electrical protective device. It does not independently provide circuit protection, electrical insulation or a defined enclosure IP rating. These characteristics must be assessed as part of the complete switchboard design and its correctly installed components.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Main electrical distribution boards.
- Internal cable compartment construction.
- Industrial power distribution cabinets.
- Commercial building electrical switchgear assemblies.
- Vertical cable routing compartments.
- Modular switchboard structural arrangements.
- Manufacturing facility electrical distribution systems.
- OEM electrical panel building and switchboard assembly.
- Replacement of compatible cable compartment uprights.
Technical Specifications
| ABB order code | 1STQ007743A0000 |
|---|---|
| Product group | System pro E Power |
| Product type | Cable compartment upright |
| Product category | Switchboard structural accessories |
| Material | Galvanised sheet steel |
| Nominal height | 2000 mm |
| Component orientation | Vertical |
| Primary function | Cable compartment structural support |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage electrical distribution switchboards |
| Installation | Within a compatible cable compartment assembly |
Frequently Asked Questions
What is the ABB PUCM2000 used for?
The ABB PUCM2000 is a galvanised sheet-steel upright used in compatible cable compartment assemblies within ABB System pro E Power low-voltage switchboards. It provides a vertical structural component for organising the compartment arrangement.
What is the height of the ABB PUCM2000?
The ABB PUCM2000 has a nominal height of 2000 mm. Its suitability should be checked against the selected switchboard enclosure and cable compartment configuration.
What material is the ABB PUCM2000 manufactured from?
The PUCM2000 is manufactured from galvanised sheet steel, providing a durable material for internal structural applications in compatible electrical distribution cabinets.
Which ABB enclosure system is compatible with the PUCM2000?
The PUCM2000 belongs to the ABB System pro E Power modular low-voltage switchboard range. The specific cabinet configuration and matching cable compartment components should be verified before installation.
Is the ABB PUCM2000 a complete cable compartment?
No. The PUCM2000 is an individual cable compartment upright, not a complete compartment assembly. Additional compatible structural and enclosure components may be required depending on the intended switchboard configuration.
Designed for Professional Switchboard Builders and Electrical Engineers
ABB System pro E Power structural accessories support coordinated modular switchboard construction. The PUCM2000 galvanised cable compartment upright provides a dedicated vertical component for compatible 2000 mm cable compartment arrangements, helping electrical panel builders achieve organised and consistent internal enclosure assemblies.
