Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007724A0000 ABB PPBR4040 Blind Recessed Panel 400 x 400 mm System pro E Power
ABB PPBR4040 is a 400 mm high by 400 mm wide blind recessed panel designed to cover compatible openings in System pro E Power modular low-voltage electrical switchboard enclosures.
£69.13
Why Choose the ABB PPBR4040 Blind Recessed Panel?
The ABB PPBR4040 is a blind recessed panel designed for the ABB System pro E Power modular low-voltage switchboard enclosure range. With nominal dimensions of 400 mm high and 400 mm wide, this enclosure accessory provides a dedicated covering for compatible switchboard compartments and panel openings.
Its blind, recessed configuration is intended for positions where a solid panel is required rather than an opening for a circuit breaker, control device or other front-mounted component. The recessed arrangement supports a coordinated enclosure layout, helping electrical panel builders achieve a consistent appearance across compatible switchboard sections.
Identified by ABB model PPBR4040 and manufacturer order code 1STQ007724A0000, the panel forms part of the System pro E Power accessory range. It is suitable for low-voltage distribution assemblies where the specified panel dimensions and recessed construction match the selected enclosure configuration.
Key Advantages
- ABB System pro E Power compatibility: Designed for integration into the manufacturer's modular switchboard enclosure system.
- Blind panel construction: Provides a solid covering for compatible enclosure openings.
- Recessed design: Supports a coordinated front-panel arrangement within the switchboard.
- 400 mm height: Suitable for matching panel positions of the specified height.
- 400 mm width: Designed for corresponding enclosure configurations.
- Professional enclosure finish: Helps create an orderly and consistent switchboard appearance.
- Modular assembly: Supports the selection of different panel types for different switchboard compartments.
- Application flexibility: Suitable for blanking unused equipment positions in compatible assemblies.
- Manufacturer identification: Dedicated ABB model and ordering code simplify specification and replacement.
Key Features
- Manufacturer: ABB.
- Product designation: PPBR4040.
- ABB order code: 1STQ007724A0000.
- Product family: System pro E Power.
- Panel type: Blind recessed panel.
- Nominal panel height: 400 mm.
- Nominal panel width: 400 mm.
- Front-panel configuration: Blind, without a designated equipment cut-out.
- Panel profile: Recessed.
- Intended function: Covering compatible switchboard panel openings.
- System application: Modular low-voltage electrical distribution enclosures.
- Installation requirement: Use with the appropriate compatible enclosure and mounting components.
Reliable Recessed Panel Coverage for Modular Switchboards
Modular low-voltage switchboards commonly incorporate different compartment arrangements for protective devices, switching equipment, cable connections and auxiliary components. Not every compartment requires a front-mounted device, and unused positions benefit from a properly selected blanking panel to complete the enclosure layout.
The ABB PPBR4040 blind recessed panel provides a dedicated covering solution for compatible 400 mm × 400 mm positions. Its blind construction is appropriate where no equipment opening is required, while its recessed profile helps maintain the intended panel arrangement within the System pro E Power assembly.
Correct panel selection is important for both mechanical fit and the overall enclosure design. The PPBR4040 should be matched to the relevant cabinet structure and mounting arrangement, with installation carried out according to the applicable ABB System pro E Power assembly instructions.
The final degree of enclosure protection, including any IP rating, depends on the complete switchboard construction and its correctly installed components. The PPBR4040 should therefore be assessed as part of the assembled enclosure rather than assigned an independent protection rating without supporting manufacturer data.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Main electrical distribution boards.
- Industrial power distribution cabinets.
- Commercial building switchgear enclosures.
- Blind covering of compatible unused panel openings.
- Recessed front-panel arrangements in electrical cabinets.
- Modular switchboard compartment assembly.
- OEM electrical panel manufacturing.
- Electrical distribution enclosure refurbishment.
- Replacement of matching recessed blind panels.
Technical Specifications
| Brand | ABB |
|---|---|
| Manufacturer part number | 1STQ007724A0000 |
| Product group | System pro E Power |
| Product category | Switchboard enclosure panels and accessories |
| Product description | Blind recessed panel |
| Nominal height | 400 mm |
| Nominal width | 400 mm |
| Panel design | Blind |
| Panel configuration | Recessed |
| Compatible enclosure range | ABB System pro E Power |
| Primary application | Covering compatible electrical switchboard openings |
Frequently Asked Questions
What is the ABB PPBR4040 used for?
The ABB PPBR4040 is a blind recessed panel used to cover compatible openings in ABB System pro E Power low-voltage switchboard enclosures. It is intended for positions where a solid panel is required instead of a device mounting opening.
What are the dimensions of the ABB PPBR4040?
The PPBR4040 has nominal dimensions of 400 mm high and 400 mm wide. These dimensions should be checked against the selected switchboard panel arrangement before installation.
What does blind recessed panel mean?
A blind panel provides a solid covering without a designated equipment cut-out. A recessed panel has a profile intended for a recessed mounting arrangement within the compatible enclosure system.
Is the ABB PPBR4040 compatible with all ABB electrical cabinets?
No. The PPBR4040 belongs to the ABB System pro E Power product range. Compatibility depends on the specific cabinet, panel opening dimensions and mounting arrangement, so it should not be assumed to fit every ABB enclosure.
Does the ABB PPBR4040 have an IP protection rating?
The product information identifies the PPBR4040 as a blind recessed panel but does not establish a standalone IP rating. The achieved protection rating depends on the complete ABB System pro E Power enclosure assembly and correct installation of its components.
Designed for Professional Switchboard Builders
ABB System pro E Power accessories provide a coordinated approach to modular low-voltage switchboard construction. The PPBR4040 blind recessed panel offers a purpose-designed solution for completing compatible 400 mm × 400 mm panel positions with a consistent recessed finish.
