1STQ007707A0000 ABB PFCS6090 2 Sliding Cable Flanges 600 x 900 mm System pro E Power

Why Choose the ABB PFCS6090 Sliding Cable Flanges 600 × 900 mm?

The ABB PFCS6090 Sliding Cable Flanges (1STQ007707A0000) are a set of two sliding cable entry flanges designed for the ABB System pro E Power modular low-voltage switchboard range. Specified for enclosure configurations measuring 600 mm wide × 900 mm deep, these accessories provide an adjustable cable entry arrangement for compatible electrical distribution switchboards.

Unlike fixed cable entry plates, the PFCS6090 sliding flange design allows the cable entry opening to be adjusted during installation. This helps electrical panel builders accommodate incoming power and control cables while creating a more organised entry point at the bottom of the enclosure.

Manufactured from galvanised sheet steel, the PFCS6090 flanges are designed for use with compatible open-bottom System pro E Power enclosure components. ABB specifies these sliding flanges for arrangements intended to achieve IP40 protection when correctly assembled. They are not suitable for switchboard structures incorporating an internal cable compartment.

Key Advantages

• Genuine ABB System pro E Power sliding cable entry accessories.
• Supplied as a set of two sliding cable flanges.
• Designed for 600 mm wide × 900 mm deep nominal switchboard configurations.
• Sliding design provides adjustable cable entry access during installation.
• Suitable for compatible open-bottom electrical enclosures.
• Supports IP40 enclosure protection when installed as part of the specified complete assembly.
• Manufactured from galvanised sheet steel.
• Helps organise incoming power and control cable routing.
• Provides an alternative to fixed cable entry flanges where an adjustable opening is required.
• Designed for professional low-voltage switchboard assembly and maintenance.

Key Features

• Manufacturer: ABB.
• Product range: System pro E Power.
• Model: PFCS6090.
• ABB order code: 1STQ007707A0000.
• Product type: Sliding incoming cable entry flanges.
• Number of sliding flanges: 2.
• Nominal enclosure width: 600 mm.
• Nominal enclosure depth: 900 mm.
• Design: Sliding flange.
• Material: Galvanised sheet steel.
• Mounting application: Compatible open-bottom enclosure arrangement.
• Enclosure protection application: IP40.
• Compatibility restriction: Not suitable for structures with an internal cable compartment.
• EAN: 8015646786920.
• Net product weight: 5.09 kg.
• ETIM classification: EC000211 – Gland plate for enclosure/cabinet.

Adjustable Cable Entry and IP40 Protection for Electrical Switchboards

Incoming cable management is an important consideration in low-voltage switchboard construction. Power and control cables must enter the enclosure through appropriately positioned openings while allowing suitable cable support, bending radii and access for installation. The ABB PFCS6090 provides a two-part sliding flange arrangement for compatible 600 mm wide × 900 mm deep System pro E Power structures.

The sliding mechanism allows the cable entry area to be adjusted to accommodate the planned cable routing. This can simplify installation compared with a fixed blind flange, particularly where multiple incoming cables must be positioned through a bottom entry opening. The completed installation must still provide appropriate cable support and maintain the specified enclosure protection.

ABB specifies these sliding flanges for use with compatible open-bottom enclosure components to achieve IP40 protection. IP40 provides protection against access by a wire and ingress of solid objects measuring at least 1 mm, but does not provide water ingress protection. The final rating applies to the complete, correctly assembled switchboard, not the sliding flanges independently.

Important compatibility restriction: ABB states that sliding incoming cable flanges cannot be installed in structures incorporating an internal cable compartment. For those configurations, a compatible alternative cable entry arrangement should be selected using the applicable ABB System pro E Power assembly documentation.

Typical Applications

• ABB System pro E Power modular low-voltage switchboards.
• Adjustable bottom cable entry arrangements for electrical distribution enclosures.
• 600 mm wide × 900 mm deep nominal switchboard configurations.
• Compatible open-bottom enclosure assemblies.
• IP40 low-voltage distribution switchboards.
• Industrial main electrical distribution boards.
• Commercial building power distribution installations.
• Manufacturing facilities and industrial electrical infrastructure.
• Switchboard installations requiring adjustable incoming cable openings.
• Professional electrical panel building and compatible enclosure refurbishment.