Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007706A0000 ABB PFCS6070 2 Sliding Cable Flanges W600 D700 mm System pro E Power
ABB PFCS6070 (1STQ007706A0000) is a two-piece sliding cable flange assembly for ABB System pro E Power modular low-voltage switchboards, designed for compatible 600 mm wide and 700 mm deep electrical enclosures to support organised cable entry and routing.
£44.18
Why Choose the ABB PFCS6070 System pro E Power Sliding Cable Flanges?
The ABB PFCS6070 (1STQ007706A0000) is a dedicated two-piece sliding cable flange assembly designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Specified for compatible electrical enclosure configurations with a nominal width of 600 mm and depth of 700 mm, this cable entry accessory provides a practical solution for managing cable access within industrial and commercial electrical distribution cabinets.
Featuring two sliding cable flanges, the PFCS6070 offers a configurable mechanical cable entry arrangement for compatible switchboard installations. Its sliding design supports the positioning and organisation of incoming and outgoing electrical cables during panel assembly, helping installers coordinate cable entry with internal electrical equipment, cable routing paths and the overall enclosure layout.
Developed for professional electrical panel builders, switchboard manufacturers and industrial electrical engineers, the ABB PFCS6070 sliding cable flange set supports organised cable management and modular switchboard construction. Its compatibility with the System pro E Power platform makes it suitable for new electrical distribution installations, compatible cabinet modifications and replacement projects requiring a correctly specified ABB cable entry component.
Key Advantages
- Genuine ABB System pro E Power sliding cable flange assembly for modular low-voltage electrical switchboards.
- Features two sliding cable flanges for a configurable cable entry arrangement.
- Designed for compatible 600 mm wide electrical enclosure structures.
- Suitable for designated 700 mm deep switchboard configurations.
- Sliding flange construction supports practical cable entry positioning during installation.
- Provides a dedicated mechanical interface for incoming and outgoing electrical cables.
- Helps electrical panel builders organise cable routing within compatible distribution cabinets.
- Designed for integration with the ABB System pro E Power modular enclosure platform.
- Supports professional switchboard assembly, cable management and maintenance planning.
- Suitable for industrial, commercial and infrastructure electrical distribution applications.
Key Features
- ABB System pro E Power series modular enclosure accessory.
- Product reference: PFCS6070.
- ABB order code: 1STQ007706A0000.
- Product designation: 2 SLIDING CABLE FLANGES W=600MM D=700MM.
- Product configuration: Two sliding cable flanges.
- Nominal enclosure width: 600 mm.
- Nominal enclosure depth: 700 mm.
- Designed for cable entry applications in compatible low-voltage electrical distribution enclosures.
- Sliding construction provides a configurable mechanical cable entry arrangement.
- Supports the routing of electrical power, feeder and control cables.
- Designed for installation within compatible ABB System pro E Power switchboard assemblies.
- Dedicated mechanical enclosure accessory for professional electrical panel building.
Flexible Cable Entry Management for Modular Electrical Switchboards
The ABB PFCS6070 sliding cable flange assembly provides a dedicated mechanical arrangement for introducing electrical cables into compatible System pro E Power switchboards. Cable entry planning is an important part of low-voltage electrical distribution cabinet design because incoming supply cables, outgoing feeder circuits and auxiliary wiring must be routed through suitable enclosure entry points.
The PFCS6070 incorporates two sliding cable flanges, distinguishing it from conventional single-piece cable entry components. This arrangement provides a configurable interface for accommodating cable entry during switchboard assembly. The permitted sliding movement, positioning method and installation sequence must follow the applicable ABB assembly instructions.
For electrical panel builders, selecting a cable entry accessory matched to the intended enclosure configuration helps coordinate the mechanical layout of the switchboard. It also supports planning for cable routes, cable support arrangements and access to internal electrical equipment during installation and maintenance.
The ABB System pro E Power platform is designed for modular low-voltage electrical distribution switchboards used in industrial, commercial and infrastructure environments. Its enclosure architecture allows compatible structural components, panels, doors, covers and cable management accessories to be combined according to the requirements of a particular electrical installation.
The PFCS6070 is specifically designated for 600 mm wide and 700 mm deep enclosure configurations. These dimensions identify the intended switchboard structure rather than verified overall manufacturing measurements of the individual sliding flanges. Correct compatibility, mounting details and required installation hardware should be confirmed using the relevant ABB technical documentation.
An appropriately designed cable entry arrangement can help maintain organised wiring and support the mechanical protection of electrical cables. Depending on the installation, additional cable glands, seals, cable supports or protective fittings may be required. Their selection should take account of cable dimensions, cable type, installation conditions and the requirements of the completed switchboard.
The final ingress protection rating of the electrical enclosure depends on the complete switchboard construction and the correctly installed cable entry arrangement. The PFCS6070 product designation does not independently establish an IP rating, cable capacity, sealing performance or compatibility with specific cable gland sizes.
As a mechanical enclosure component, the ABB PFCS6070 does not independently provide electrical switching, circuit protection, cable termination or strain relief. These functions must be addressed through the appropriate electrical devices, cable accessories and overall switchboard design.
Typical Applications
- ABB System pro E Power modular electrical switchboards.
- Low-voltage main electrical distribution boards.
- Industrial electrical distribution cabinet construction.
- Commercial building electrical switchgear installations.
- Incoming electrical supply cable entry arrangements.
- Outgoing power distribution and feeder cable routing.
- Switchboards requiring compatible two-piece sliding cable entry components.
- Manufacturing facility electrical power distribution systems.
- OEM switchboard manufacturing and professional electrical panel building.
- Maintenance, refurbishment and replacement of compatible ABB cable entry assemblies.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007706A0000 |
| Product designation | 2 SLIDING CABLE FLANGES W=600MM D=700MM |
| Product type | Sliding cable flange assembly |
| Product category | Electrical enclosure accessories / cable entry components |
| Number of sliding cable flanges | 2 |
| Flange configuration | Sliding |
| Nominal enclosure width | 600 mm |
| Nominal enclosure depth | 700 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Mechanical cable entry interface for electrical switchboards |
| Application | Modular low-voltage electrical distribution assemblies |
| Installation arrangement | Designated cable entry location within a compatible switchboard enclosure |
| Cable entry configuration | Two-piece sliding flange arrangement |
| Ingress protection | Dependent on the completed switchboard assembly and cable entry installation |
| Cable compatibility | Subject to the selected cable entry accessories and installation requirements |
| Product classification | Modular switchboard enclosure component |
Frequently Asked Questions
What is the ABB PFCS6070 (1STQ007706A0000) used for?
The ABB PFCS6070 is a two-piece sliding cable flange assembly designed for compatible ABB System pro E Power modular low-voltage switchboards. It provides a mechanical cable entry arrangement for routing incoming and outgoing electrical cables into the enclosure.
How many sliding cable flanges are included in the ABB PFCS6070 configuration?
The ABB PFCS6070 is designated as 2 SLIDING CABLE FLANGES, identifying a configuration comprising two sliding cable flanges. Any additional mounting hardware, cable glands or installation accessories should be confirmed against the applicable ABB product documentation.
What enclosure dimensions is the ABB PFCS6070 designed for?
The PFCS6070 is specified for compatible switchboard structures with a nominal width of 600 mm and a depth of 700 mm. These figures describe the intended enclosure configuration rather than the exact physical dimensions of each flange.
What is the difference between the ABB PFCS6070 and PFCS6050?
Both products are two-piece sliding cable flange assemblies in the ABB System pro E Power range for 600 mm wide enclosure configurations. The PFCS6070 (1STQ007706A0000) is specified for a 700 mm enclosure depth, while the PFCS6050 (1STQ007705A0000) is specified for a 500 mm enclosure depth.
Does the ABB PFCS6070 include cable glands or provide a specific IP rating?
The ABB PFCS6070 is specified as an assembly of two sliding cable flanges. Cable glands, sealing accessories and cable supports should not be assumed to be included unless confirmed in the supplied product contents. The final IP protection rating depends on the complete switchboard assembly and the correctly installed cable entry arrangement.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support the construction of modular, dependable low-voltage electrical distribution systems. The ABB PFCS6070 two-piece sliding cable flange assembly provides a dedicated cable entry solution for compatible 600 mm wide and 700 mm deep switchboard configurations, supporting organised cable routing and professional electrical panel assembly in industrial and commercial environments.
