Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007705A0000 ABB PFCS6050 2 Sliding Cable Flanges W600 D500 mm System pro E Power
ABB PFCS6050 (1STQ007705A0000) is a two-piece sliding cable flange assembly for ABB System pro E Power modular low-voltage switchboards, designed for compatible 600 mm wide and 500 mm deep electrical enclosures to support organised cable entry and routing.
£39.19
Why Choose the ABB PFCS6050 System pro E Power Sliding Cable Flanges?
The ABB PFCS6050 (1STQ007705A0000) is a dedicated two-piece sliding cable flange assembly designed for integration with the ABB System pro E Power modular low-voltage switchboard system. Specified for compatible electrical enclosure configurations with a nominal width of 600 mm and depth of 500 mm, this cable entry accessory provides a practical solution for organising cable access within industrial and commercial electrical distribution cabinets.
Unlike a conventional single-piece cable entry flange, the PFCS6050 features two sliding cable flanges, providing a configurable mechanical arrangement for accommodating electrical cable entry within the designated enclosure structure. This design is particularly useful during switchboard assembly, where the routing and positioning of incoming or outgoing cables must be coordinated with the internal equipment layout.
Developed for professional electrical panel builders, switchboard manufacturers and industrial electrical engineers, the ABB PFCS6050 sliding cable flange set supports modular enclosure construction and organised cable management. Its compatibility with the ABB System pro E Power platform makes it suitable for new electrical distribution installations, compatible cabinet modifications and replacement projects requiring the correct ABB cable entry accessory.
Key Advantages
- Genuine ABB System pro E Power sliding cable flange assembly for modular low-voltage electrical switchboards.
- Supplied configuration comprises two sliding cable flanges.
- Designed for compatible 600 mm wide switchboard structures.
- Suitable for designated 500 mm deep electrical enclosures.
- Sliding flange arrangement supports practical cable entry positioning during enclosure assembly.
- Provides a dedicated mechanical interface for incoming and outgoing electrical cables.
- Helps electrical panel builders organise cable routing within compatible switchboard configurations.
- Designed for integration with the ABB System pro E Power modular enclosure platform.
- Supports professional cable management and electrical distribution cabinet construction.
- Suitable for industrial, commercial and infrastructure electrical installations.
Key Features
- ABB System pro E Power series modular enclosure accessory.
- Product reference: PFCS6050.
- ABB order code: 1STQ007705A0000.
- Product designation: 2 SLIDING CABLE FLANGES W=600MM D=500MM.
- Product configuration: Two sliding cable flanges.
- Nominal enclosure width: 600 mm.
- Nominal enclosure depth: 500 mm.
- Designed for cable entry applications in compatible low-voltage electrical distribution cabinets.
- Sliding construction provides an adjustable mechanical cable entry arrangement within the intended enclosure design.
- Supports the routing of electrical power and control cables.
- Designed for installation within compatible ABB System pro E Power switchboard assemblies.
- Mechanical enclosure accessory for professional switchboard manufacturing and installation.
Flexible Cable Entry Management for Modular Electrical Switchboards
The ABB PFCS6050 sliding cable flange assembly is designed to support the organised introduction of electrical cables into compatible System pro E Power enclosures. Cable entry components are an important part of low-voltage switchboard construction because incoming supply cables, outgoing distribution circuits and auxiliary wiring must enter the cabinet through appropriately designed openings.
The PFCS6050 incorporates two sliding cable flanges, distinguishing it from conventional single-piece cable entry components. The sliding arrangement provides a practical means of configuring the cable entry area during installation, subject to the permitted movement and assembly method specified by ABB. This can help panel builders coordinate the cable entry arrangement with the position of internal electrical equipment and the planned cable routes.
The ABB System pro E Power platform is designed for modular low-voltage electrical distribution switchboards. Its enclosure architecture allows compatible structural components, doors, panels, covers and cable management accessories to be combined to meet the requirements of different industrial and commercial installations.
The PFCS6050 is specifically designated for 600 mm wide and 500 mm deep enclosure configurations. These dimensions describe the intended switchboard structure rather than verified overall manufacturing measurements of the individual sliding flanges. Correct component selection and installation should follow the relevant ABB technical documentation.
A properly planned cable entry arrangement helps support cable organisation, mechanical protection and maintainability. Depending on the completed switchboard design, additional cable glands, seals, supports or other cable management components may be required. The exact accessories needed depend on the cable types, entry method and installation environment.
The final ingress protection rating of the switchboard depends on the complete enclosure construction and the correctly installed cable entry arrangement. The PFCS6050 product designation does not independently establish an IP rating, cable capacity, sealing performance or compatibility with particular cable gland sizes.
As a mechanical enclosure component, the ABB PFCS6050 does not independently provide electrical switching, circuit protection, cable termination or strain relief. These functions must be addressed through the selected electrical equipment and suitable installation accessories.
Typical Applications
- ABB System pro E Power modular electrical switchboards.
- Low-voltage main electrical distribution boards.
- Industrial electrical distribution cabinet construction.
- Commercial building electrical switchgear installations.
- Incoming electrical supply cable entry arrangements.
- Outgoing power distribution cable routing.
- Switchboards requiring compatible two-piece sliding cable entry components.
- Manufacturing facility electrical power distribution systems.
- OEM switchboard manufacturing and professional electrical panel building.
- Maintenance, refurbishment and replacement of compatible ABB cable entry assemblies.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007705A0000 |
| Product designation | 2 SLIDING CABLE FLANGES W=600MM D=500MM |
| Product type | Sliding cable flange assembly |
| Product category | Electrical enclosure accessories / cable entry components |
| Number of sliding cable flanges | 2 |
| Flange configuration | Sliding |
| Nominal enclosure width | 600 mm |
| Nominal enclosure depth | 500 mm |
| Compatible enclosure system | ABB System pro E Power |
| Primary function | Mechanical cable entry interface for electrical switchboards |
| Application | Modular low-voltage electrical distribution assemblies |
| Installation arrangement | Designated cable entry location within a compatible switchboard enclosure |
| Cable entry configuration | Two-piece sliding flange arrangement |
| Ingress protection | Dependent on the completed switchboard assembly and cable entry installation |
| Cable compatibility | Subject to the selected cable entry accessories and installation requirements |
| Product classification | Modular switchboard enclosure component |
Frequently Asked Questions
What is the ABB PFCS6050 (1STQ007705A0000) used for?
The ABB PFCS6050 is a two-piece sliding cable flange assembly designed for compatible ABB System pro E Power modular low-voltage switchboards. It provides a mechanical cable entry arrangement for routing electrical cables into the enclosure.
How many cable flanges are included in the ABB PFCS6050 configuration?
The ABB PFCS6050 is designated as 2 SLIDING CABLE FLANGES, identifying a configuration comprising two sliding cable flanges. Any additional installation hardware or cable accessories should be confirmed against the applicable ABB product documentation.
What enclosure dimensions is the ABB PFCS6050 designed for?
The PFCS6050 is specified for compatible switchboard structures with a nominal width of 600 mm and a depth of 500 mm. These figures identify the intended enclosure configuration rather than the exact physical dimensions of each flange.
What is the advantage of sliding cable flanges compared with a fixed cable entry flange?
A sliding cable flange arrangement provides a configurable mechanical interface for cable entry, helping installers position and organise cables during switchboard assembly. The exact adjustment range and installation method depend on the manufacturer's design and assembly instructions.
Does the ABB PFCS6050 include cable glands or provide a specific IP rating?
The ABB PFCS6050 is specified as a set of two sliding cable flanges. Cable glands, sealing accessories and cable supports should not be assumed to be included unless confirmed in the supplied product contents. The final IP protection rating depends on the completed switchboard assembly and the correctly installed cable entry arrangement.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support the construction of modular, dependable low-voltage electrical distribution systems. The ABB PFCS6050 two-piece sliding cable flange assembly provides a dedicated cable entry solution for compatible 600 mm wide and 500 mm deep switchboard configurations, supporting organised cable routing and professional electrical panel assembly in industrial and commercial applications.
