Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007701A0000 ABB PFCS4090 Two Sliding Cable Entry Flanges 400 x 900 mm System pro E Power
ABB PFCS4090 set of two galvanised sheet steel sliding cable entry flanges for System pro E power switchboards, designed for compatible 400 mm wide and 900 mm deep electrical enclosures.
£40.28
Why Choose the ABB PFCS4090 Sliding Cable Entry Flanges?
The ABB PFCS4090 is a set of two sliding cable entry flanges designed for use with ABB System pro E power low-voltage electrical distribution enclosures and switchboards. As part of the ABB System pro E power range, these accessories provide an adjustable solution for routing electrical cables through the bottom of compatible switchboard structures while supporting organised cable installation and enclosure assembly.
Manufactured from galvanised sheet steel, the PFCS4090 combines durable construction with a practical sliding design. The two-piece arrangement allows installers to adjust the cable entry opening during installation, making it easier to accommodate incoming power and control cables. The flanges are designed for use with compatible open-bottom enclosure structures and support IP40 protection when correctly installed in accordance with the applicable ABB System pro E power assembly instructions.
Designed for enclosures with a nominal 400 mm width and 900 mm depth, the ABB PFCS4090 is suitable for industrial electrical distribution cabinets, switchgear assemblies and power distribution installations. Its dedicated System pro E power compatibility enables straightforward integration into modular electrical enclosure systems, providing a dependable cable entry solution for professional panel builders and electrical engineers.
Key Advantages
- Purpose-designed sliding cable entry flange set for ABB System pro E power switchboards.
- Two sliding cable flanges provide adjustable access for cable routing and installation.
- 400 mm nominal enclosure width compatibility.
- 900 mm nominal enclosure depth compatibility.
- Durable galvanised sheet steel construction for industrial electrical installations.
- Supports IP40 enclosure protection when correctly installed with compatible open-bottom structures.
- Sliding arrangement helps simplify cable installation and enclosure assembly.
- Designed for integration with ABB's modular low-voltage power distribution enclosure system.
Key Features
- ABB System pro E power enclosure accessory.
- PFCS4090 sliding cable entry flange set.
- Two sliding cable flanges per set.
- 400 mm nominal enclosure width.
- 900 mm nominal enclosure depth.
- Galvanised sheet steel construction.
- Adjustable sliding configuration for bottom cable entry.
- Designed for compatible open-bottom electrical enclosure structures.
- Supports IP40 protection in the appropriate enclosure configuration.
- Suitable for modular low-voltage main distribution switchboards.
- Designed for enclosure structures without an internal cable compartment.
Flexible Cable Entry Management for Industrial Electrical Distribution
Cable entry components play an important role in the construction of low-voltage electrical switchboards, allowing incoming power and control cables to be routed into an enclosure while maintaining an organised installation. Sliding cable entry flanges such as the ABB PFCS4090 provide an adjustable alternative to fixed closure plates, helping panel builders manage cable entry openings during installation and assembly.
The ABB System pro E power range is designed for modular low-voltage power distribution systems used in industrial and commercial environments. The PFCS4090 is intended for compatible open-bottom enclosure arrangements and supports IP40 protection when correctly assembled. ABB specifies that these sliding flanges are not suitable for structures incorporating an internal cable compartment, so the enclosure configuration should be checked before installation.
Typical Applications
- ABB System pro E power low-voltage switchboards.
- Industrial electrical distribution cabinets.
- Commercial building main distribution systems.
- Electrical switchgear and power distribution assemblies.
- Bottom cable entry arrangements in modular electrical enclosures.
- Manufacturing plant electrical infrastructure.
- Industrial automation and motor control cabinet installations.
- Electrical panel building and switchboard assembly.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ007701A0000 |
| Product type | Sliding cable entry flange set |
| Accessory category | Electrical enclosure cable entry accessories |
| Flange configuration | Two sliding cable flanges |
| Compatible enclosure width | 400 mm |
| Compatible enclosure depth | 900 mm |
| Material | Galvanised sheet steel |
| Product dimensions (W × H × D) | 850 × 140 × 15 mm |
| Net weight | 3.14 kg |
| Supported enclosure protection | IP40 with compatible open-bottom assembly |
| Mounting location | Bottom cable entry area |
| Installation arrangement | Sliding flange installation with compatible open bottom |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage main distribution switchboards and electrical enclosures |
| ETIM classification | EC000211 – Cable entry flange for enclosures |
| Product group | System Pro E Power |
Frequently Asked Questions
What is the ABB PFCS4090 used for?
The ABB PFCS4090 is a set of two sliding cable entry flanges designed to provide adjustable bottom cable entry access in compatible ABB System pro E power low-voltage electrical switchboards and distribution enclosures.
What enclosure dimensions is the PFCS4090 designed for?
The PFCS4090 is designed for compatible ABB System pro E power enclosure structures with a nominal 400 mm width and 900 mm depth.
How many cable flanges are included and what material are they made from?
The ABB PFCS4090 consists of two sliding cable flanges manufactured from galvanised sheet steel, providing a durable and adjustable cable entry arrangement for electrical enclosures.
What protection rating does the ABB PFCS4090 support?
The PFCS4090 is designed to support IP40 enclosure protection when correctly installed with a compatible open-bottom ABB System pro E power structure. The protection rating of the complete assembly depends on its configuration and installation.
Can the PFCS4090 be installed in enclosures with an internal cable compartment?
No. ABB specifies that the PFCS4090 sliding cable flanges are intended for compatible open-bottom structures and must not be installed in enclosure configurations incorporating an internal cable compartment. The ABB order code is 1STQ007701A0000.
Trusted by Electrical Panel Builders and Industrial Engineers Worldwide
ABB System pro E power enclosure accessories are designed to support reliable and flexible low-voltage switchboard construction. The PFCS4090 sliding cable entry flange set provides a durable, adjustable solution for compatible electrical distribution cabinets, helping professional panel builders achieve organised cable routing and efficient enclosure assembly.
