Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007682A0000 ABB PFCF8090 Cable Entry Flange 800 x 900 mm System pro E Power
ABB PFCF8090 (1STQ007682A0000) is a fixed galvanised sheet steel cable entry flange for System pro E Power modular switchboards, designed for 800 mm wide and 900 mm deep enclosure configurations and compatible open-bottom cable entry arrangements.
£49.86
Why Choose the ABB PFCF8090 Cable Entry Flange 800 × 900 mm?
The ABB PFCF8090 Cable Entry Flange (1STQ007682A0000) is a fixed cable entry accessory designed for the ABB System pro E Power modular low-voltage switchboard range. Specified for enclosure dimensions of 800 mm wide × 900 mm deep, this flange provides a dedicated solution for managing incoming electrical cables through compatible switchboard enclosure openings.
Manufactured from galvanised sheet steel, the PFCF8090 features a fixed, solid construction intended for installation with compatible open-bottom enclosure components. It helps panel builders establish an organised cable entry area while supporting the mechanical protection and environmental sealing requirements of the completed electrical distribution assembly.
ABB specifies the PFCF8090 as part of its fixed incoming cable flange range for System pro E Power switchboards. When correctly installed with the appropriate open-bottom components and sealing arrangements, it supports enclosure configurations designed to achieve IP65 ingress protection. The flange is particularly useful in commercial and industrial switchboard installations where a larger nominal cable entry area is required.
Key Advantages
- Genuine ABB System pro E Power cable entry flange for modular low-voltage switchboards.
- 800 mm nominal width for compatible switchboard enclosure sections.
- 900 mm nominal depth for the specified enclosure arrangement.
- Fixed incoming cable flange design provides a stable cable entry covering.
- Durable galvanised sheet steel construction.
- Designed for installation with compatible open-bottom enclosure components.
- Supports correctly assembled IP65 switchboard configurations.
- Helps organise incoming power and control cable routing.
- Suitable for compatible switchboards incorporating internal cable compartments.
- Provides a system-specific solution for professional electrical panel building.
- Suitable for commercial, industrial and infrastructure electrical distribution applications.
Key Features
- Manufacturer: ABB.
- Product range: System pro E Power.
- Model: PFCF8090.
- ABB manufacturer order code: 1STQ007682A0000.
- Product type: Fixed incoming cable entry flange.
- Nominal width: 800 mm.
- Nominal depth: 900 mm.
- Material: Galvanised sheet steel.
- Construction: Fixed metal flange.
- Installation application: Compatible open-bottom switchboard enclosure.
- Ingress protection application: IP65 when correctly incorporated into a complete, sealed enclosure.
- Actual product width: 740 mm.
- Actual product height: 840 mm.
- Material thickness: 2 mm.
- Net product weight: 10 kg.
- Package quantity: 1 piece.
Reliable Cable Entry Management and Enclosure Protection
Effective cable entry management is essential when designing and assembling low-voltage electrical distribution switchboards. Incoming power and control cables must enter the enclosure through appropriately positioned openings while maintaining suitable mechanical protection, cable support and accessibility. The ABB PFCF8090 provides a fixed galvanised steel flange for compatible 800 mm wide × 900 mm deep System pro E Power enclosure configurations.
The flange is designed for use with compatible open-bottom enclosure components. Its solid construction provides a defined surface for the cable entry arrangement, allowing panel builders to plan the required cable routing and associated fittings. Where cable openings are introduced, suitable glands, seals and cable support components must be selected to suit the installation requirements.
For switchboards requiring IP65 ingress protection, the complete enclosure must be correctly assembled and sealed. IP65 indicates protection against dust ingress and water jets under the applicable test conditions. The PFCF8090 is a component used in suitable IP65 enclosure arrangements; the flange does not independently establish an IP65 rating. ABB also specifies that where internal cable compartment crosspieces are used, the fixed cable entry flange must be installed before those crosspieces.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- Fixed incoming cable entry for compatible electrical distribution enclosures.
- 800 mm wide × 900 mm deep enclosure configurations.
- Compatible open-bottom switchboard assemblies.
- IP65 switchboard configurations with correctly selected sealing components.
- Industrial main electrical distribution boards.
- Commercial building power distribution infrastructure.
- Manufacturing and industrial electrical installations.
- Switchboards incorporating compatible internal cable compartments.
- Professional electrical panel building, switchboard manufacturing and enclosure refurbishment.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Model number | PFCF8090 |
| ABB order code | 1STQ007682A0000 |
| Product designation | Cable Entry Flange W=800MM D=900MM |
| Product category | Switchboard cable entry and enclosure accessories |
| Flange type | Fixed incoming cable flange |
| Nominal enclosure width | 800 mm |
| Nominal enclosure depth | 900 mm |
| Actual product width | 740 mm |
| Actual product height | 840 mm |
| Actual product thickness | 2 mm |
| Material | Galvanised sheet steel |
| Net product weight | 10 kg |
| Installation type | Fixed |
| Mounting arrangement | Compatible open-bottom enclosure configuration |
| Enclosure protection application | IP65 when correctly configured and sealed |
| Compatible enclosure system | ABB System pro E Power |
| Suitable product class | Main distribution boards |
| Application | Incoming cable entry for low-voltage electrical distribution switchboards |
| Package quantity | 1 piece |
Frequently Asked Questions
What is the ABB PFCF8090 (1STQ007682A0000) used for?
The ABB PFCF8090 is a fixed incoming cable entry flange for compatible ABB System pro E Power modular switchboards. It provides a metal covering for cable entry arrangements used with suitable open-bottom electrical enclosures.
What are the dimensions of the ABB PFCF8090 cable entry flange?
The PFCF8090 is specified for a nominal enclosure width of 800 mm and depth of 900 mm. Its listed physical dimensions are 740 mm wide × 840 mm high × 2 mm thick. The nominal dimensions describe the compatible enclosure arrangement rather than the exact measurements of the flange itself.
What material is the ABB PFCF8090 manufactured from?
The ABB PFCF8090 is manufactured from galvanised sheet steel. Its fixed metal construction provides a durable covering for compatible low-voltage electrical distribution switchboard cable entry arrangements.
Can the ABB PFCF8090 be used in an IP65 switchboard?
Yes. ABB specifies fixed incoming cable flanges for use with compatible open-bottom enclosure components in switchboard configurations intended to achieve IP65 protection. The rating applies to the complete, correctly assembled enclosure, not the individual flange. Suitable cable glands, seals and other required components must be installed to maintain the intended protection level.
Does the ABB PFCF8090 include cable glands or other cable entry fittings?
The ABB PFCF8090 (1STQ007682A0000) is catalogued as a fixed cable entry flange with a package quantity of one piece. The product specification does not confirm the inclusion of cable glands or other cable entry fittings. Additional components should be selected according to the installation requirements and verified with the supplier.
Trusted by Electrical Panel Builders Worldwide
The ABB PFCF8090 Cable Entry Flange (1STQ007682A0000) is a genuine System pro E Power accessory for compatible 800 mm wide × 900 mm deep low-voltage switchboard configurations. Its fixed galvanised steel construction supports organised incoming cable entry and helps electrical panel builders create professionally assembled, maintainable power distribution enclosures.
