Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007670A0000 ABB PFCF6020 Cable Entry Flange 600 x 200 mm System pro E power
ABB PFCF6020 is a cable entry flange measuring 600 mm wide by 200 mm deep, designed for compatible ABB System pro E power low-voltage switchgear enclosures.
£24.95
Why Choose the ABB PFCF6020 Cable Entry Flange 600 x 200 mm?
The ABB PFCF6020 is a cable entry flange designed for compatible ABB System pro E power low-voltage switchgear assemblies. Featuring a specified width of 600 mm and depth of 200 mm, this enclosure accessory provides a manufacturer-designated component for cable entry arrangements within modular electrical distribution cabinets. Identified by ABB order code 1STQ007670A0000, the PFCF6020 belongs to the ABB System pro E power product group.
The ABB System pro E power range provides modular enclosure and installation solutions for low-voltage electrical distribution equipment. Its coordinated cabinet structures, panels, flanges and installation accessories enable electrical panel builders to configure switchgear assemblies according to specific installation requirements. The PFCF6020 cable entry flange is intended for compatible enclosure arrangements where a designated cable entry component is required.
With its 600 mm width and 200 mm depth, the ABB PFCF6020 provides a defined flange configuration for compatible System pro E power installations. Its manufacturer-specific model and order code support accurate component selection during switchgear construction, cable entry planning, maintenance and refurbishment.
Key Advantages
- Genuine ABB System pro E power enclosure accessory.
- Designed for compatible cable entry arrangements in low-voltage switchgear cabinets.
- 600 mm nominal width for the specified flange configuration.
- 200 mm nominal depth for compatible enclosure arrangements.
- Supports coordinated cable entry planning within modular electrical distribution assemblies.
- Provides a manufacturer-designated component for compatible switchgear construction.
- Suitable for industrial and commercial electrical distribution cabinet applications.
- Supports accurate identification of replacement enclosure components.
- Integrates into the ABB System pro E power product family, subject to configuration compatibility.
Key Features
- ABB System pro E power product family.
- PFCF6020 model designation.
- ABB order code 1STQ007670A0000.
- CABLE ENTRY FLANGE W=600MM D=200MM product designation.
- Cable entry flange enclosure component.
- 600 mm specified flange width.
- 200 mm specified flange depth.
- Intended for compatible modular low-voltage switchgear enclosures.
- Supports designated cable entry configurations within electrical distribution cabinets.
- Suitable for compatible enclosure construction and replacement projects.
Technical Specifications
- Manufacturer: ABB
- Product family: System pro E power
- Model: PFCF6020
- ABB order code: 1STQ007670A0000
- Part number: 1STQ007670A0000
- Product designation: CABLE ENTRY FLANGE W=600MM D=200MM
- Product type: Cable entry flange
- Component category: Electrical enclosure accessory
- Nominal width: 600 mm
- Nominal depth: 200 mm
- Designated function: Cable entry arrangement
- Compatible enclosure family: ABB System pro E power
- Product category: Low-voltage switchgear cable entry accessories
- Primary application: Compatible modular electrical distribution enclosures
Cable Entry Flange Integration for Low-Voltage Switchgear Enclosures
Low-voltage electrical distribution assemblies require carefully planned cable entry arrangements to accommodate incoming and outgoing electrical conductors. Cable routing, termination space and enclosure layout are important considerations during switchgear design. Correctly specified cable entry components help panel builders coordinate these requirements with the dimensions and construction of the intended cabinet.
The ABB System pro E power range supports modular switchboard construction through coordinated enclosure structures, internal installation components and accessories. The ABB PFCF6020 is identified as a cable entry flange measuring 600 mm wide and 200 mm deep, providing a defined product reference for compatible electrical distribution enclosure arrangements requiring these dimensions.
The cable entry flange must be selected according to the intended enclosure configuration and cable installation requirements. The supplied product designation does not independently establish the flange material, surface finish, number of cable openings, drilling arrangement, ingress protection rating or included fixing accessories. Cable glands, seals and other entry components may be required depending on the installation. The complete cable entry arrangement should be verified against the relevant ABB System pro E power documentation and applicable installation requirements.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible electrical distribution cabinets requiring cable entry flanges.
- Industrial power distribution switchboards.
- Commercial building electrical distribution enclosures.
- Modular switchgear cable entry arrangements.
- Enclosure configurations requiring a 600 mm-wide and 200 mm-deep cable entry flange.
- Electrical panel manufacturing and switchgear system integration projects.
- Maintenance, refurbishment and replacement of compatible ABB cable entry components.
Frequently Asked Questions
What is the ABB PFCF6020 cable entry flange used for?
The ABB PFCF6020 is a cable entry flange intended for compatible ABB System pro E power low-voltage switchgear assemblies. It provides a manufacturer-designated component for cable entry arrangements within electrical distribution enclosures.
What are the dimensions of the ABB PFCF6020?
The ABB PFCF6020 has a specified nominal width of 600 mm and depth of 200 mm. These dimensions should be matched to the intended System pro E power enclosure configuration.
Does the ABB PFCF6020 include cable glands or sealing accessories?
The product is identified as a cable entry flange. The supplied specification does not confirm whether cable glands, seals or fixing accessories are included, so the exact contents and any separately required components should be checked before ordering.
Is the ABB PFCF6020 compatible with all System pro E power enclosures?
The ABB PFCF6020 belongs to the System pro E power product family, but compatibility depends on the enclosure dimensions, cable entry arrangement and installation requirements. The relevant ABB selection and assembly documentation should be consulted before installation.
What is the ABB order code for the PFCF6020 cable entry flange?
The ABB order code is 1STQ007670A0000, identifying the PFCF6020 cable entry flange with a specified width of 600 mm and depth of 200 mm within the System pro E power range.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System pro E power enclosure components support modular low-voltage electrical distribution installations across industrial and commercial environments. The ABB PFCF6020 cable entry flange provides a manufacturer-designated solution for compatible 600 mm × 200 mm cable entry arrangements, supporting accurate component selection, coordinated cabinet construction and effective planning of cable installation within electrical distribution assemblies.
