1STQ007655A0000 ABB PFCF2530 Fixed Cable Entry Flange 250 x 300 mm System pro E Power

Why Choose the ABB PFCF2530 Cable Entry Flange 250 × 300 mm?

The ABB PFCF2530 Cable Entry Flange (1STQ007655A0000) is a fixed cable entry accessory designed for the ABB System pro E Power modular low-voltage switchboard range. With nominal dimensions of 250 mm wide × 300 mm deep, this flange provides a dedicated solution for managing incoming electrical cables through compatible switchboard enclosure openings.

Manufactured from sheet metal, the PFCF2530 is designed for use in conjunction with compatible open top or bottom enclosure arrangements. Its fixed construction provides a defined cable entry area that can be adapted to the installation's cable requirements. When correctly prepared and assembled with suitable cable glands, sealing components and other specified ABB accessories, the flange can form part of an enclosure designed to achieve IP65 ingress protection.

As part of the ABB System pro E Power accessory range, the PFCF2530 supports professional cable routing, enclosure assembly and electrical distribution infrastructure. Its 250 × 300 mm nominal format makes it suitable for corresponding cable entry sections, helping electrical panel builders maintain an organised approach to incoming power and control cabling in commercial and industrial switchboards.

Key Advantages

• Genuine ABB System pro E Power fixed cable entry flange for compatible modular switchboards.
• 250 mm nominal width for the specified cable entry arrangement.
• 300 mm nominal depth for compatible enclosure sections.
• Designed for use with suitable open top or bottom switchboard components.
• Supports the construction of IP65-rated enclosure assemblies when all required components are correctly selected and installed.
• Durable sheet metal construction for professional electrical enclosure applications.
• Fixed flange arrangement provides a defined location for incoming cable entry.
• Can be prepared for suitable cable glands and cable entry fittings according to installation requirements.
• Helps maintain organised cable routing within electrical distribution equipment.
• Suitable for industrial, commercial and infrastructure switchboard installations.

Key Features

• ABB System pro E Power modular switchboard accessory.
• Model: PFCF2530.
• ABB manufacturer order code: 1STQ007655A0000.
• Fixed incoming cable entry flange.
• 250 mm nominal width.
• 300 mm nominal depth.
• Sheet metal construction.
• Designed for integration with compatible open top/bottom enclosure arrangements.
• Suitable for incorporation into appropriately assembled IP65 switchboard configurations.
• Provides a dedicated area for routing incoming electrical cables.
• Compatible with suitably selected cable entry and sealing accessories.
• Fixed installation design for professional switchboard assembly.
• Suitable for low-voltage electrical distribution enclosures.
• ABB catalogue package quantity: 1 piece.

Reliable Cable Entry Management for ABB System pro E Power Switchboards

Effective cable entry management is essential for the safe and organised construction of electrical distribution switchboards. Incoming power and control cables must pass through enclosure boundaries without compromising mechanical protection, cable support or the intended environmental performance of the assembly. The ABB PFCF2530 provides a fixed sheet metal flange for a compatible 250 mm wide × 300 mm deep cable entry arrangement, helping panel builders establish a defined interface between external cabling and internal distribution equipment.

ABB identifies its fixed incoming cable flanges for use with compatible open enclosure components in configurations intended to achieve IP65 protection. IP65 means that the complete enclosure is dust-tight and protected against water jets under the relevant test conditions. However, the PFCF2530 flange does not independently provide an IP65 rating. The finished switchboard must use correctly fitted panels, suitable cable glands, appropriate seals and all other specified components to achieve the intended degree of protection. Any openings made in the flange must be appropriately sealed.

For installations incorporating an internal cable compartment, the assembly sequence and selection of top or bottom components should follow ABB's applicable System pro E Power instructions. The fixed flange may need to be installed before internal cable compartment crosspieces are fitted. Electrical installers should also consider cable bending radii, strain relief, conductor segregation and access for maintenance when planning the cable entry arrangement.

Typical Applications

• ABB System pro E Power modular low-voltage switchboards.
• Fixed incoming cable entry for compatible electrical distribution enclosures.
• 250 mm wide × 300 mm deep cable entry configurations.
• Open top or bottom enclosure assemblies requiring a dedicated cable entry flange.
• IP65 switchboard installations with appropriately specified sealing and cable entry components.
• Industrial main electrical distribution boards.
• Commercial building power distribution infrastructure.
• Manufacturing facilities and industrial electrical installations.
• Electrical switchboards incorporating internal cable management compartments.
• Professional electrical panel building, switchboard manufacturing and compatible enclosure refurbishment.