Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007627A0000 ABB PPRB2020 IP30/IP40 Right-Hand External Blind Rear Panel 2000 x 625 mm System pro E Power
ABB PPRB2020 (1STQ007627A0000) is a right-hand IP30/IP40 external blind rear panel with nominal dimensions of 2000 mm high and 625 mm wide, designed for compatible 1250 mm wide ABB System pro E Power low-voltage switchboards.
£186.02
Why Choose the ABB PPRB2020 System pro E Power IP30/IP40 External Rear Panel?
The ABB PPRB2020 (1STQ007627A0000) is a genuine IP30/IP40 external blind right-hand rear panel designed for ABB System pro E Power low-voltage electrical distribution switchboards. With a nominal height of 2000 mm and a panel width of 625 mm, it is specifically intended for compatible 1250 mm wide switchboard structures requiring a two-part rear enclosure arrangement.
Unlike a standard full-width rear panel, the PPRB2020 provides the right-hand section of a split rear covering. It is designed to work with the corresponding ABB PPLB2020 left-hand panel, allowing electrical panel builders to complete the rear enclosure of compatible 1250 mm wide System pro E Power assemblies.
Manufactured from steel with a professional RAL 7035 light grey finish, this solid, non-ventilated panel provides durable external protection and a consistent appearance across compatible ABB switchboard installations. Its dedicated design makes it suitable for new switchboard construction, enclosure refurbishment and replacement of the right-hand rear panel in an existing System pro E Power assembly.
Key Advantages
- Genuine ABB System pro E Power external enclosure component for compatible low-voltage distribution switchboards.
- Dedicated right-hand blind rear panel for split rear enclosure arrangements.
- Designed for nominal 2000 mm high × 625 mm wide panel applications.
- Suitable for compatible 1250 mm wide switchboard structures.
- Supports IP30/IP40 enclosure configurations when correctly installed with the required associated components.
- Robust steel construction provides a durable protective enclosure covering.
- RAL 7035 light grey finish complements other ABB System pro E Power components.
- Solid, non-ventilated design provides a continuous barrier across the covered rear opening.
- Pairs with the corresponding ABB PPLB2020 left-hand panel for compatible split rear assemblies.
- Individual panel supply supports straightforward replacement and modular switchboard construction.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PPRB2020 product designation.
- ABB order code: 1STQ007627A0000.
- IP30/IP40 external enclosure panel application.
- Right-hand rear panel configuration.
- 2000 mm nominal panel height.
- 625 mm nominal panel width.
- Designed for 1250 mm wide switchboard structures.
- Solid blind panel without ventilation openings.
- Durable steel construction.
- RAL 7035 light grey external finish.
- Compatible with the corresponding PPLB2020 left-hand rear panel.
- Dedicated component for modular split rear enclosure arrangements.
- Suitable for professional switchboard manufacturing and maintenance.
- Supplied as one individual right-hand panel.
Purpose-Built Right-Hand Rear Protection for 1250 mm Wide Switchboards
The ABB PPRB2020 is specifically designed for the right-hand portion of a split rear enclosure arrangement. Within a compatible 1250 mm wide System pro E Power switchboard, the rear covering is formed using dedicated right-hand and left-hand components. The PPRB2020 provides the nominal 625 mm right-hand section, while the corresponding PPLB2020 provides the matching left-hand section. This modular arrangement allows panel builders to select the correct components for wider switchboard structures without substituting a standard single-piece rear panel.
The panel is intended for IP30/IP40 external enclosure applications. Its blind construction provides a solid protective covering, while the complete switchboard's degree of protection depends on the correct installation of all associated panels, doors, frames and sealing components. Where protection against vertically falling water droplets is required, an appropriate ABB top sealing arrangement must also be specified. The PPRB2020 is not an IP65 panel and should only be installed in accordance with the applicable ABB System pro E Power assembly instructions.
Typical Applications
- ABB System pro E Power low-voltage main distribution boards.
- Right-hand rear enclosure coverage for compatible 1250 mm wide switchboard structures.
- Split rear panel arrangements using ABB PPRB2020 and PPLB2020.
- Industrial electrical power distribution switchboards.
- Commercial building main distribution assemblies.
- Electrical enclosures requiring compatible IP30/IP40 blind rear panels.
- Factory and production facility electrical distribution systems.
- Professional electrical panel building and modular switchboard manufacturing.
- Replacement of damaged or worn right-hand rear enclosure panels.
- Refurbishment and maintenance of compatible ABB System pro E Power switchboards.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Product range | External covers and blind rear panels |
| ABB order code | 1STQ007627A0000 |
| Product description | IP30/40 EXT. PANEL RW H=2000 W=625MM |
| Product type | External blind rear enclosure panel |
| Panel configuration | Right-hand section |
| Nominal panel height | 2000 mm |
| Nominal panel width | 625 mm |
| Compatible switchboard width | 1250 mm |
| Intended enclosure protection | IP30/IP40 |
| Material | Steel |
| Finish | Light grey protective coating |
| Colour reference | RAL 7035 |
| Panel design | Solid, blind, non-ventilated |
| Mounting arrangement | External right-hand rear panel |
| Matching left-hand panel | ABB PPLB2020 |
| Matching left-hand panel order code | 1STQ007628A0000 |
| Compatible system | ABB System pro E Power |
| Suitable for | Modular low-voltage main distribution boards |
| EAN | 8015646797612 |
| Country of origin | Italy |
| Customs tariff code | 85381000 |
| Package quantity | 1 piece |
Frequently Asked Questions
What is the ABB PPRB2020 (1STQ007627A0000) used for?
The ABB PPRB2020 is a right-hand external blind rear panel for compatible ABB System pro E Power low-voltage switchboards. It provides the right-hand section of a split rear enclosure covering for a nominal 2000 mm high and 1250 mm wide switchboard structure.
What are the dimensions of the ABB PPRB2020 external panel?
The PPRB2020 has a nominal height of 2000 mm and a nominal panel width of 625 mm. It is designed for the right-hand half of a compatible 1250 mm wide switchboard rear enclosure. These nominal measurements describe the intended enclosure configuration rather than the exact overall physical dimensions of the manufactured panel.
Is the ABB PPRB2020 a right-hand or left-hand rear panel?
The ABB PPRB2020 (1STQ007627A0000) is the right-hand rear panel. Its corresponding left-hand component is the ABB PPLB2020 (1STQ007628A0000). Both are specified for nominal 2000 mm high switchboard structures and are used in compatible split rear enclosure arrangements.
What IP protection rating does the ABB PPRB2020 support?
The PPRB2020 is intended for IP30/IP40 external panel configurations. The final protection rating depends on the complete switchboard assembly, including the correct selection and installation of associated covers, doors and any required sealing accessories. The PPRB2020 should not be treated as an IP65 enclosure panel.
Does the ABB PPRB2020 include the matching left-hand panel?
No. The ABB PPRB2020 is supplied as one individual right-hand panel. The corresponding ABB PPLB2020 left-hand panel, order code 1STQ007628A0000, is a separate product and should be ordered where required to complete the compatible split rear enclosure arrangement.
Designed for Professional Electrical Panel Builders
ABB System pro E Power external enclosure components support the modular construction of professional low-voltage electrical distribution assemblies. The ABB PPRB2020 IP30/IP40 right-hand blind rear panel provides a dedicated 2000 mm × 625 mm nominal enclosure covering for compatible 1250 mm wide switchboard structures, helping electrical panel builders achieve consistent rear enclosure protection and professional assembly layouts.
