Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007624B0000 ABB XT5 400A 3/4P Plug-In Horizontal Installation Kit W600 – System Pro E Power
ABB 1STQ007624B0000 System Pro E Power horizontal installation kit for compatible Tmax XT5 400 A plug-in circuit breakers in three-pole or four-pole configurations within 600 mm wide switchboard arrangements.
£226.04
Why Choose the ABB XT5 400A 3/4P Plug-In Horizontal Installation Kit?
The ABB XT5 400A 3/4P Plug-In Horizontal Installation Kit, manufacturer order code 1STQ007624B0000, is a dedicated circuit breaker installation accessory from the ABB System Pro E Power range. Designed for compatible ABB Tmax XT5 400 A plug-in circuit breaker configurations, this kit supports 3-pole and 4-pole horizontal installation arrangements within suitable 600 mm wide low-voltage switchboard structures.
The kit is intended to support the mechanical integration of ABB Tmax XT5 moulded-case circuit breakers into compatible modular electrical distribution assemblies. Its plug-in configuration distinguishes it from installation accessories intended for fixed or withdrawable breaker executions, while the horizontal installation designation identifies the required mounting orientation.
With its specified 400 A breaker configuration, 3/4-pole compatibility, plug-in execution, horizontal mounting orientation and 600 mm installation width, ABB order code 1STQ007624B0000 provides panel builders with a clearly identified installation solution for suitable System Pro E Power switchboard designs. It supports accurate accessory selection, organised equipment positioning and professional low-voltage distribution panel construction.
Key Advantages
- Dedicated ABB installation accessory: Designed for compatible Tmax XT5 circuit breaker arrangements within System Pro E Power switchboards.
- XT5 400 A configuration: Specifically identified for the corresponding 400 A breaker installation arrangement.
- 3-pole and 4-pole compatibility: Supports suitable XT5 plug-in circuit breaker configurations with either pole arrangement.
- Plug-in breaker execution: Intended for compatible plug-in mounting and connection arrangements.
- Horizontal installation: Provides a defined mounting solution for horizontally arranged XT5 circuit breakers.
- 600 mm installation width: Matches the specified switchboard width for the intended configuration.
- Modular system integration: Designed for use with compatible ABB System Pro E Power enclosure structures.
- Professional switchboard assembly: Helps panel builders select an application-specific installation kit for approved low-voltage distribution equipment.
Key Features
- Manufacturer: ABB.
- ABB order code: 1STQ007624B0000.
- Product range: System Pro E Power.
- Related circuit breaker family: ABB Tmax XT5.
- Product type: Circuit breaker installation kit.
- Specified breaker configuration: XT5 400 A.
- Supported pole configurations: Three-pole and four-pole (3P/4P).
- Breaker execution: Plug-in.
- Installation orientation: Horizontal.
- Specified switchboard width: 600 mm.
- Installation application: Mechanical integration of compatible XT5 plug-in circuit breakers.
- Enclosure platform: ABB System Pro E Power modular low-voltage switchboards.
- Supports the corresponding ABB circuit breaker installation arrangement within compatible switchboard structures.
Reliable Horizontal Installation for ABB Tmax XT5 Plug-In Circuit Breakers
Circuit breaker installation kits are important components in modular low-voltage switchboard construction. They support the mechanical integration of protective devices into the intended enclosure structure, helping ensure that equipment is positioned according to the approved assembly design. Correct kit selection is particularly important where circuit breakers have different frame sizes, pole configurations, mounting orientations and connection executions.
The ABB 1STQ007624B0000 installation kit is identified for compatible XT5 400 A plug-in circuit breaker configurations with either three or four poles. Its horizontal installation arrangement and specified 600 mm switchboard width make it a dedicated accessory for suitable System Pro E Power layouts rather than a universal installation kit for every XT5 breaker configuration.
The plug-in execution is a key selection characteristic. Plug-in circuit breakers interface with corresponding plug-in connection components, allowing removal from their mating assembly in accordance with the manufacturer's procedures. This arrangement differs from fixed and withdrawable circuit breaker installations, so the selected breaker execution, plug-in components and installation accessories must be compatible.
ABB Tmax XT5 moulded-case circuit breakers are used in low-voltage electrical distribution systems for circuit protection and switching applications. The XT5 range includes different current ratings, pole configurations and protection technologies. The 400 A designation of this installation kit identifies its intended breaker configuration; it does not independently establish the electrical current-carrying capacity, breaking capacity or protection characteristics of the installation accessory.
The horizontal mounting arrangement must be considered alongside the enclosure structure, breaker positioning, conductor routing and the relevant ABB installation requirements. The specified 600 mm width should be matched to the intended System Pro E Power switchboard configuration, while any additional installation dimensions and required clearances must be confirmed from the applicable assembly documentation.
ABB System Pro E Power provides a modular platform for constructing low-voltage switchboards using compatible enclosure structures, circuit breaker installation kits and associated electrical equipment. The 1STQ007624B0000 kit supports this approach by providing a defined accessory for compatible XT5 plug-in breaker installations.
This product is an installation kit rather than a complete circuit breaker or protective device. The supplied specification does not establish the precise kit contents or confirm the inclusion of a circuit breaker, plug-in base or electrical connection accessories. Final mechanical compatibility, electrical ratings and switchboard compliance depend on the complete assembly and the relevant ABB installation instructions.
Typical Applications
- Low-voltage distribution switchboards: Installing compatible ABB Tmax XT5 400 A plug-in circuit breakers within System Pro E Power assemblies.
- Industrial power distribution: Supporting suitable circuit breaker arrangements in manufacturing and processing facilities.
- Commercial electrical infrastructure: Integrating compatible XT5 equipment into modular electrical distribution systems.
- Horizontal circuit breaker installations: Providing a dedicated installation kit for the specified mounting orientation.
- Three-pole and four-pole breaker assemblies: Supporting compatible XT5 plug-in configurations with either pole arrangement.
- 600 mm wide switchboard configurations: Integrating circuit breaker equipment into the corresponding enclosure layout.
- Electrical panel manufacturing: Supporting professional construction of modular low-voltage switchboards.
- Switchboard refurbishment and upgrades: Supporting approved modifications involving compatible ABB Tmax XT5 plug-in equipment.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| Related circuit breaker range | ABB Tmax XT5 |
| Product designation | XT5 KIT 3-4P PLUG IN(400A)H.W=600 |
| ABB order code | 1STQ007624B0000 |
| Product type | Circuit breaker installation kit |
| Accessory category | Switchboard circuit breaker mounting and installation accessories |
| Specified breaker configuration | XT5 400 A |
| Supported number of poles | 3P / 4P |
| Breaker execution | Plug-in |
| Installation orientation | Horizontal |
| Specified installation width | 600 mm |
| Compatible breaker family | ABB Tmax XT5 |
| Primary application | Horizontal installation of compatible XT5 400 A plug-in circuit breaker arrangements |
| System compatibility | ABB System Pro E Power, subject to assembly configuration |
| Manufacturer part number | 1STQ007624B0000 |
Frequently Asked Questions
What is the ABB 1STQ007624B0000 installation kit used for?
The ABB 1STQ007624B0000 is an installation kit designed for the horizontal mounting of compatible ABB Tmax XT5 400 A plug-in circuit breakers in three-pole or four-pole configurations within suitable 600 mm wide System Pro E Power switchboard arrangements.
Which circuit breakers are compatible with this installation kit?
The kit is specified for compatible ABB Tmax XT5 400 A plug-in circuit breaker configurations with three or four poles. Exact compatibility must be confirmed against the selected breaker execution, associated plug-in components and applicable ABB System Pro E Power assembly documentation.
What does H.W=600 mean in the product designation?
The designation H.W=600 identifies a horizontal installation arrangement for a specified 600 mm wide switchboard configuration. It does not establish the installation height or depth, which must be checked against the relevant ABB assembly instructions.
Does the ABB 1STQ007624B0000 kit include the XT5 circuit breaker?
The product is identified as an XT5 plug-in installation kit, not as a complete circuit breaker. The supplied specification does not confirm whether a breaker, plug-in base or additional connection components are included. The exact kit contents should be checked against ABB documentation before ordering.
Can this kit be used for fixed, withdrawable or vertically mounted XT5 breakers?
The 1STQ007624B0000 is specifically designated for a horizontal plug-in XT5 400 A arrangement. Compatibility with fixed or withdrawable breaker executions, or with vertical mounting configurations, is not established. The appropriate installation kit should be selected according to the breaker execution, pole configuration, mounting orientation and ABB assembly requirements.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power installation accessories, including the 1STQ007624B0000 XT5 400 A plug-in horizontal installation kit, support professional electrical panel builders and switchboard manufacturers in creating organised, modular and appropriately configured low-voltage power distribution assemblies.
