Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007624A0000 ABB PPEB2080 IP30/IP40 External Panel 2000 mm × 800 mm – System Pro E Power
ABB PPEB2080 IP30/IP40 external panel measuring 2000 mm high and 800 mm wide, designed for integration into compatible ABB System Pro E Power low-voltage switchboard enclosures.
£187.39
Why Choose the ABB PPEB2080 IP30/IP40 External Panel?
The ABB PPEB2080 is a dedicated IP30/IP40 external panel measuring 2000 mm in height and 800 mm in width, designed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by ABB order code 1STQ007624A0000, this genuine ABB enclosure accessory provides an external covering component for modular electrical distribution systems.
As part of the comprehensive ABB System Pro E Power range, the PPEB2080 supports the construction of industrial and commercial low-voltage switchboards. Its IP30/IP40 designation identifies it for use in appropriately configured enclosure assemblies requiring protection against access to internal electrical equipment and the ingress of solid foreign objects. The achieved degree of protection depends on the complete enclosure configuration and correct installation.
With a specified panel height of 2000 mm and panel width of 800 mm, the ABB PPEB2080 provides a large external covering surface for compatible switchboard structures. Its defined dimensions support accurate component selection, consistent enclosure finishing and professional assembly of modular low-voltage power distribution equipment.
Key Advantages
- Genuine ABB System Pro E Power accessory: Designed for integration into compatible modular low-voltage switchboard assemblies.
- IP30/IP40 designation: Supports appropriately configured enclosures requiring defined protection against access and solid-object ingress.
- 2000 mm panel height: Suitable for compatible tall switchboard enclosure configurations.
- 800 mm panel width: Provides a substantial external covering dimension for suitable modular structures.
- External enclosure protection: Helps form a physical boundary between internal electrical equipment and accessible areas.
- Modular system integration: Complements compatible ABB System Pro E Power enclosure frames, doors and installation accessories.
- Professional switchboard finish: Supports consistent external appearance across compatible electrical distribution assemblies.
- Clear manufacturer identification: ABB order code 1STQ007624A0000 supports accurate specification, procurement and replacement.
Key Features
- Manufacturer: ABB.
- Product designation: PPEB2080.
- ABB order code: 1STQ007624A0000.
- Product range: System Pro E Power.
- Product type: External enclosure panel.
- Specified protection designation: IP30/IP40.
- Nominal panel height: 2000 mm.
- Nominal panel width: 800 mm.
- Nominal dimensions (H × W): 2000 mm × 800 mm.
- Installation application: External covering of compatible low-voltage switchboard enclosures.
- Supports the mechanical completion of appropriately configured modular electrical enclosures.
- Designed for integration with compatible ABB System Pro E Power supporting structures and associated enclosure components.
Reliable IP30/IP40 External Panel Protection for Low-Voltage Switchboards
External enclosure panels are important mechanical components in low-voltage electrical switchboard construction. They help establish the physical boundary surrounding internal electrical equipment, separating installed components from accessible areas and supporting the intended enclosure arrangement. Correct panel selection contributes to mechanical compatibility, consistent external finishing and the specified degree of protection of the completed assembly.
The ABB PPEB2080 external panel is specifically identified for compatible System Pro E Power configurations requiring a 2000 mm high and 800 mm wide external covering component. Its large dimensions make it relevant to suitable full-height switchboard arrangements, where the panel must correspond to the selected enclosure structure and mounting configuration.
The product carries an IP30/IP40 designation. Under the IP Code, IP30 provides protection against access with a tool and the ingress of solid foreign objects measuring 2.5 mm or larger. IP40 provides protection against access with a wire and the ingress of solid foreign objects measuring 1 mm or larger. Neither designation specifies protection against water ingress because the second IP digit is zero.
The actual degree of protection achieved by a completed switchboard depends on the entire enclosure assembly. Compatible structural components, external panels, doors, joints, cable entries and installation methods must be selected and assembled correctly. The PPEB2080 should therefore be installed in accordance with the relevant ABB instructions, and the intended IP30 or IP40 configuration must be verified for the finished enclosure.
ABB System Pro E Power provides a modular platform for industrial and commercial low-voltage electrical distribution systems. Its range of structural frames, external panels, doors and installation accessories enables panel builders to develop switchboard arrangements for different applications. The PPEB2080 complements this system by providing a dedicated external panel for suitable enclosure configurations.
The PPEB2080 is a mechanical enclosure accessory rather than a complete switchboard or electrical protective device. It does not independently establish the current rating, short-circuit withstand capability or overall compliance of the completed installation. These characteristics must be determined from the complete switchboard design and applicable ABB assembly documentation.
Typical Applications
- Low-voltage distribution switchboards: Providing external enclosure covering within compatible ABB System Pro E Power assemblies.
- Industrial electrical installations: Supporting enclosed power distribution equipment in manufacturing and processing facilities.
- Commercial electrical infrastructure: Completing compatible modular electrical distribution enclosures.
- IP30/IP40 switchboard configurations: Supporting appropriately assembled enclosures requiring protection against access and solid-object ingress.
- Full-height switchboard structures: Providing a 2000 mm high external panel for compatible enclosure arrangements.
- Electrical panel manufacturing: Supporting professional assembly of modular low-voltage switchboards.
- Switchboard refurbishment: Replacing a matching external panel during approved maintenance or modification work.
- System Pro E Power projects: Integrating with compatible ABB enclosure frames, doors and associated installation accessories.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007624A0000 |
| Product type | External panel |
| Accessory category | Switchboard external enclosure panels |
| Specified protection designation | IP30/IP40 |
| Panel height | 2000 mm |
| Panel width | 800 mm |
| Nominal dimensions (H × W) | 2000 mm × 800 mm |
| Installation position | External enclosure panel |
| Primary application | Low-voltage switchboard enclosure construction |
| System compatibility | ABB System Pro E Power, subject to assembly configuration |
| Installation arrangement | Mechanical integration with compatible switchboard structures |
| Manufacturer part number | 1STQ007624A0000 |
Frequently Asked Questions
What is the ABB PPEB2080 used for?
The ABB PPEB2080 is an IP30/IP40 external panel designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. It forms part of the external enclosure covering and supports the construction of modular electrical distribution equipment.
What are the dimensions of the ABB PPEB2080 external panel?
The PPEB2080 measures 2000 mm in height and 800 mm in width. These dimensions should be matched to the intended ABB System Pro E Power enclosure configuration. A separate depth dimension is not established by the supplied product specification.
What is the difference between IP30 and IP40 protection?
IP30 provides protection against access with a tool and solid foreign objects measuring 2.5 mm or larger, while IP40 provides protection against access with a wire and solid foreign objects measuring 1 mm or larger. Neither rating specifies protection against water ingress. The actual protection level depends on the complete enclosure assembly.
Is the ABB PPEB2080 suitable for outdoor installations?
The PPEB2080 is designated IP30/IP40, and neither protection level includes water-ingress protection. Outdoor suitability is therefore not established by this designation. Installations exposed to rain, moisture or other environmental hazards require an appropriately rated complete enclosure and confirmation against the relevant ABB specifications.
Is the ABB PPEB2080 compatible with every System Pro E Power enclosure?
The PPEB2080 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the enclosure dimensions, structural configuration, mounting arrangement and associated components. The relevant ABB assembly documentation should be checked before selection and installation.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power enclosure accessories, including the PPEB2080 IP30/IP40 external panel, support professional electrical panel builders and switchboard manufacturers in creating organised, modular and appropriately configured low-voltage power distribution assemblies.
