Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007616A0000 ABB PPRB1820 IP30/IP40 Right External Panel 1800 mm × 625 mm – System Pro E Power
ABB PPRB1820 IP30/IP40 right-hand external panel measuring 1800 mm high and 625 mm wide, designed for integration into compatible ABB System Pro E Power low-voltage switchboard enclosures.
£168.66
Why Choose the ABB PPRB1820 IP30/IP40 Right External Panel?
The ABB PPRB1820 is a dedicated IP30/IP40 right-hand external panel measuring 1800 mm in height and 625 mm in width, designed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by ABB order code 1STQ007616A0000, this genuine ABB enclosure accessory provides a specifically configured right-side external covering component for modular electrical distribution systems.
As part of the ABB System Pro E Power range, the PPRB1820 supports the construction of industrial and commercial low-voltage switchboards. Its IP30/IP40 designation identifies it for use in appropriately configured enclosure assemblies requiring protection against access to internal electrical equipment and the ingress of solid foreign objects. The actual degree of protection achieved depends on the complete switchboard enclosure configuration and correct installation.
With its specified 1800 mm height, 625 mm width and right-hand installation position, the ABB PPRB1820 provides a dimensionally defined external panel for compatible switchboard structures. Its application-specific configuration helps panel builders select the correct enclosure component, maintain consistent external finishing and complete modular electrical distribution assemblies according to the intended design.
Key Advantages
- Genuine ABB System Pro E Power accessory: Designed for integration into compatible modular low-voltage switchboard assemblies.
- IP30/IP40 designation: Supports suitably configured enclosures requiring defined protection against access and solid-object ingress.
- Right-hand external panel: Specifically identified for the right-side position within compatible enclosure arrangements.
- 1800 mm panel height: Suitable for compatible tall switchboard configurations requiring this dimension.
- 625 mm panel width: Provides a defined horizontal dimension for accurate enclosure component selection.
- External enclosure covering: Helps form a physical boundary between internal electrical equipment and accessible areas.
- Modular system integration: Complements compatible ABB System Pro E Power frames, panels and enclosure accessories.
- Professional switchboard construction: Supports organised assembly, consistent external finishing and straightforward component identification.
Key Features
- Manufacturer: ABB.
- Product designation: PPRB1820.
- ABB order code: 1STQ007616A0000.
- Product range: System Pro E Power.
- Product type: External enclosure panel.
- Panel position: Right-hand side.
- Specified protection designation: IP30/IP40.
- Nominal panel height: 1800 mm.
- Nominal panel width: 625 mm.
- Nominal dimensions (H × W): 1800 mm × 625 mm.
- Designed for external covering applications within compatible modular low-voltage switchboard assemblies.
- Supports the mechanical completion of appropriately configured electrical enclosures.
- Intended for integration with compatible ABB System Pro E Power supporting structures and associated enclosure components.
Reliable Right-Hand External Panel Protection for Low-Voltage Switchboards
External enclosure panels are important mechanical components in the construction of low-voltage electrical switchboards. They help establish the physical boundary surrounding internal electrical equipment, separating installed components from accessible areas and supporting the intended enclosure arrangement. Selecting the correct panel is essential for maintaining mechanical compatibility, a consistent external finish and the specified degree of protection of the completed assembly.
The ABB PPRB1820 right-hand external panel is specifically identified for compatible System Pro E Power configurations requiring an 1800 mm high and 625 mm wide external covering component. Its right-hand designation is an important selection characteristic, distinguishing it from panels intended for other enclosure positions.
The product carries an IP30/IP40 designation. Under the IP Code, IP30 provides protection against access with a tool and the ingress of solid foreign objects measuring 2.5 mm or larger. IP40 provides protection against access with a wire and the ingress of solid foreign objects measuring 1 mm or larger. Neither designation specifies protection against water ingress because the second IP digit is zero.
The actual ingress protection achieved by a completed switchboard depends on the entire enclosure assembly. Compatible structural components, external panels, doors, joints, cable entries and installation methods must be selected and assembled correctly. The PPRB1820 should therefore be installed in accordance with the applicable ABB instructions, and the intended IP30 or IP40 configuration should be verified for the finished enclosure.
ABB System Pro E Power provides a modular platform for industrial and commercial low-voltage electrical distribution systems. Its range of structural frames, external panels, doors and installation accessories enables panel builders to develop switchboard arrangements for different applications. The PPRB1820 complements this system by providing a dedicated right-hand external panel for suitable enclosure configurations.
The PPRB1820 is a mechanical enclosure accessory rather than a complete switchboard or electrical protective device. It does not independently establish the current rating, short-circuit withstand capability or overall compliance of the completed installation. These characteristics must be determined from the complete switchboard design and the relevant ABB assembly documentation.
Typical Applications
- Low-voltage distribution switchboards: Providing right-hand external enclosure covering within compatible ABB System Pro E Power assemblies.
- Industrial electrical installations: Supporting enclosed power distribution equipment in manufacturing and processing facilities.
- Commercial electrical infrastructure: Completing compatible modular electrical distribution enclosures.
- IP30/IP40 switchboard configurations: Supporting appropriately assembled enclosures requiring the specified protection against access and solid-object ingress.
- Right-hand enclosure panel installations: Providing a dedicated external covering component for the corresponding switchboard position.
- Electrical panel manufacturing: Supporting professional assembly of modular low-voltage switchboards.
- Switchboard refurbishment: Replacing a matching right-hand external panel during approved maintenance or modification work.
- System Pro E Power projects: Integrating with compatible ABB enclosure frames, doors and associated installation accessories.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007616A0000 |
| Product type | Right-hand external panel |
| Accessory category | Switchboard external enclosure panels |
| Specified protection designation | IP30/IP40 |
| Panel position | Right |
| Panel height | 1800 mm |
| Panel width | 625 mm |
| Nominal dimensions (H × W) | 1800 mm × 625 mm |
| Installation arrangement | Right-hand external enclosure covering |
| Primary application | Low-voltage switchboard enclosure construction |
| System compatibility | ABB System Pro E Power, subject to assembly configuration |
| Manufacturer part number | 1STQ007616A0000 |
Frequently Asked Questions
What is the ABB PPRB1820 used for?
The ABB PPRB1820 is an IP30/IP40 right-hand external panel designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. It forms part of the external enclosure covering and supports the construction of modular electrical distribution equipment.
What are the dimensions of the ABB PPRB1820 external panel?
The PPRB1820 measures 1800 mm in height and 625 mm in width. It is specifically identified as a right-hand external panel. These dimensions should be matched to the intended ABB System Pro E Power enclosure configuration.
What is the difference between IP30 and IP40 protection?
IP30 provides protection against access with a tool and solid foreign objects measuring 2.5 mm or larger, while IP40 provides protection against access with a wire and solid foreign objects measuring 1 mm or larger. Neither rating specifies protection against water ingress. The actual protection level depends on the complete enclosure assembly.
Can the ABB PPRB1820 be installed on the left-hand side of a switchboard?
The PPRB1820 is specifically designated as a right-hand external panel. Compatibility with a left-hand installation position is not established by the supplied specification. The appropriate panel should be selected according to the enclosure arrangement and the relevant ABB System Pro E Power assembly instructions.
Is the ABB PPRB1820 compatible with every System Pro E Power enclosure?
The PPRB1820 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the enclosure dimensions, structural configuration, right-hand mounting arrangement and associated components. The relevant ABB assembly documentation should be checked before selection and installation.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power enclosure accessories, including the PPRB1820 IP30/IP40 right-hand external panel, support professional electrical panel builders and switchboard manufacturers in creating organised, modular and appropriately configured low-voltage power distribution assemblies.
