Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007612B0000 is a System pro E Power installation kit for compatible ABB Tmax XT5 fixed 3-pole and 4-pole moulded-case circuit breakers in the 400 A and 630 A classes, designed for 800 mm wide modular switchboard sections.
£289.22
The ABB XT5 installation kit (1STQ007612B0000) is a dedicated mounting solution for ABB Tmax XT5 fixed circuit breakers within the ABB System pro E Power modular switchboard range. Designed for 3-pole and 4-pole fixed circuit breaker configurations in the 400 A and 630 A classes, this kit is specified for switchboard sections with a nominal width of 800 mm.
Installing moulded-case circuit breakers in a low-voltage distribution switchboard requires a suitable mechanical arrangement that accommodates the selected breaker and its connections. The ABB XT5 kit provides a system-specific installation solution, helping panel builders plan circuit breaker positions and integrate protective devices into compatible System pro E Power assemblies.
As a genuine ABB System pro E Power accessory, order code 1STQ007612B0000 supports coordinated switchboard construction for commercial and industrial electrical distribution. It is intended for fixed XT5 breaker installations rather than withdrawable or plug-in configurations, making correct device selection and assembly compatibility essential.
ABB Tmax XT5 moulded-case circuit breakers are used in low-voltage electrical distribution systems for switching and circuit protection. Their installation within a switchboard must account for the breaker frame, pole arrangement, mounting version, electrical connections and the requirements of the complete assembly. The ABB 1STQ007612B0000 installation kit is specified for fixed XT5 configurations in compatible System pro E Power switchboard sections.
The kit's 800 mm nominal width identifies the intended switchboard section size, while its 3P/4P compatibility supports the specified pole configurations. The 400 A and 630 A figures identify the relevant XT5 breaker classes; they should not be interpreted as a standalone current rating for the mounting kit or as confirmation of the completed switchboard's electrical performance.
For a safe and compliant installation, panel builders should verify the exact XT5 device variant, mounting orientation, connection arrangement, required clearances and associated accessories against ABB's current assembly documentation. The installation kit is one element of the complete switchboard and does not replace the circuit breaker or determine the assembly's short-circuit withstand rating, temperature-rise performance or ingress protection.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ007612B0000 |
| Product designation | XT5 Kit 3-4P Fixed (400/630A) V W=800MM |
| Product type | Circuit breaker installation kit |
| Compatible breaker family | ABB Tmax XT5 |
| Compatible breaker frame classes | 400 A and 630 A |
| Supported pole configurations | 3-pole and 4-pole |
| Circuit breaker mounting version | Fixed |
| Nominal switchboard width | 800 mm |
| Configuration designation | V |
| Application | Low-voltage electrical distribution switchboards |
| Compatible enclosure system | ABB System pro E Power |
| Installation | Internal circuit breaker mounting within a compatible switchboard assembly |
| Breaker supply | Circuit breaker selection is separate from the installation kit specification |
The ABB 1STQ007612B0000 is an installation kit for mounting compatible ABB Tmax XT5 fixed moulded-case circuit breakers within ABB System pro E Power modular switchboards. It is specified for 3-pole and 4-pole breaker configurations in the 400 A and 630 A classes.
The kit is designated for ABB Tmax XT5 fixed circuit breakers in 3-pole or 4-pole configurations associated with the 400 A and 630 A classes. The exact breaker version and connection arrangement must be checked against ABB's installation documentation.
The ABB 1STQ007612B0000 kit is specified for a nominal switchboard section width of 800 mm within the ABB System pro E Power range. This is the intended section width, not necessarily the physical width of the kit itself.
The product designation specifies fixed-mounted XT5 circuit breakers. It should not be assumed compatible with withdrawable or plug-in versions. Those configurations may require different installation kits and accessories.
The product is designated as an XT5 installation kit, not a complete circuit breaker. The compatible XT5 breaker should be selected separately unless the supplier explicitly confirms a bundled package. The kit contents and any additional connection accessories should be checked before installation.
ABB System pro E Power installation accessories help panel builders create coordinated low-voltage distribution assemblies. The ABB XT5 Fixed Circuit Breaker Installation Kit (1STQ007612B0000) is specified for 3-pole and 4-pole fixed XT5 breaker configurations in the 400 A and 630 A classes, supporting integration into compatible 800 mm wide switchboard sections.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.